Subversion Repositories Scribus

Rev

Rev 12937 | Blame | Compare with Previous | Last modification | View Log | RSS feed

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1" language="fr_FR">
<context>
    <name></name>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="unfinished">getColorNames() -&gt; liste

Crée la liste des noms de toutes les couleurs définie dans le document.
S&apos;il n&apos;y a aucun document ouvert, la liste est composée des couleurs présentes par défaut.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">getColor(&quot;nom&quot;) -&gt; tuple

Retourne un tuple (C,M,J,N) contenant les quatre composantes de couleurs de
la couleur &quot;nom&quot; du document courant. Si aucun document n&apos;est ouvert,
retourne la valeur de la couleur &quot;nom&quot; des couleurs par défaut.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">getColorAsRGB(&quot;nom&quot;) -&gt; tuple

Retourne un tuple (R,V,B) contenant les trois composantes de couleurs de
la couleur &quot;nom&quot; du document courant, convertie dans l&apos;espace RVB. Si 
aucun document n&apos;est ouvert,retourne la valeur de la couleur &quot;nom&quot; des 
couleurs par défaut.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">changeColor(&quot;nom&quot;, c, m, j, k)

Change les valeurs c,m,j et n de la couleur &quot;nom&quot;. La couleur est définie par
les quatres composantes c = Cyan, m = Magenta, j = Jaune, N = Noir.
Chaque composante a une valeur comprise entre 0 et 255.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">deleteColor(&quot;nom&quot;, &quot;subsitution&quot;)

Supprime la couleur &quot;nom&quot;. Chaque occurrence de la couleur est remplacée
par la couleur &quot;substitution&quot;. Si cette dernière n&apos;est pas spécifiée, la couleur
de remplacement sera &quot;None&quot;, c&apos;est à dire transparent.

La fonction deleteColor travaille sur les couleurs par défaut si aucun document 
n&apos;est ouvert. Dans ce cas, &quot;substitution&quot; n&apos;a aucun effet.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished">replaceColor(&quot;nom&quot;, &quot;substitution&quot;)

Remplace chaque occurrence de la couleur &quot;nom&quot; par la couleur &quot;substitution&quot;.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="unfinished">newDocDialog() -&gt; booléen

Affiche la boîte de dialogue &quot;Nouveau document&quot;. Crée un nouveau document si
l&apos;utilisateur valide les réglages. Ne crée pas de document si l&apos;utilisateur clique sur
&quot;Annuler&quot;. Retourne vrai si un nouveau document est créé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="unfinished">newStyleDialog() -&gt; chaîne

Affiche le dialogue de création d&apos;un nouveau style de paragraphe. 
Retourne le nom du nouveau style ou None si l&apos;utilisateur annule.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="unfinished">newDocument(taille, marges, orientation, numeroPremièrePage,
                       unité, typePages, positionPremièrePage) -&gt; booléen

Crée un nouveau document et retourne vrai en cas de succès. Les divers paramètres
ont la signification suivante :

taille : un tuple (hauteur, largeur) décrivant la taille du document. Il est possible
d&apos;utiliser des constantes prédéfinies nommées PAPER_&lt;paper_type&gt; (PAPER_A4...)

marges : un tuple (gauche, droite, haut, bas) décrivant les marges du
nouveau document

orientation : l&apos;orientation de la page - constantes PORTRAIT, LANDSCAPE

numeroPremièrePage : numéro de la première page du document, utilisé
pour la numérotation des pages. La plupart du temps, ce sera 1, mais
d&apos;autres valeurs peuvent se révéler utiles pour des documents découpés
en plusieurs parties.

unité : définit l&apos;unité de mesure utilisée dans ce document. Utiliser l&apos;une des
constantes prédéfinies pour cela : UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS. 
typePages : une des constantes prédéfinies PAGE_n. PAGE_1 pour des pages
simples, PAGE_2 pour des pages en regard, PAGE_3 pour 3 volets et
PAGE_4 pour 4 volets.

positionPremièrePage : position de la première page dans le document.
Démarre à 0 (0 = première page).

nombrePages : nombre de pages à créer.

Les valeurs de hauteur, largeur et de marges sont exprimées dans l&apos;unité
fournie pour le document. PAPER_* sont des constantes exprimées en points;
donc si l&apos;unité de votre document n&apos;est pas le point, il faut en tenir compte.

exemple: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,(new line)
PAGE_4, 3, 1)

Lève une erreur ScribusError si positionPremièrePage est plus grand que ce qui
est admissible par typePages.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="unfinished">newDoc(taille, marges, orientation, numeroPremierePage,
                   unité, pagesRegard, firstSideLeft) -&gt; booléen

ATTENTION : FONCTION OBSOLETE, utiliser newDocument à la place !

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="unfinished">closeDoc()

Ferme le document en cours sans demande de confirmation de sauvegarde.

Lève l&apos;erreur NoDocOpenError s&apos;il n&apos;y a pas de document à fermer
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="unfinished">haveDoc() -&gt; booléen

Retourne vrai si un document est ouvert.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="unfinished">openDoc(&quot;nom&quot;)

Ouvre le document &quot;nom&quot;.

Lève l&apos;erreur ScribusError si le document ne peut pas être ouvert.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="unfinished">saveDoc()

Enregistre le document courant avec son nom actuel et retourne vrai en cas de succès.
Si le document n&apos;a pas encore été sauvegardé, le dialogue d&apos;enregistrement de fichiers
sera ouvert.

Il n&apos;y a actuellement pas de moyen de savoir si l&apos;enregistrement échoue.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="unfinished">saveDocAs(&quot;nom&quot;)

Enregistre le document courant sous le nom &quot;nom&quot; (qui peut contenir un chemin
complet ou relatif).

Lève l&apos;erreur ScribusError si l&apos;enregistrement échoue.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="unfinished">setInfo(&quot;auteur&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; booléen

Définit les informations du document. &quot;auteur&quot;, &quot;info&quot; et &quot;description&quot; sont 
des chaînes de caractères.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="unfinished">setUnit(type)

Change l&apos;unité de mesure du document. Les valeurs possibles pour l&apos;unité sont
définies par les constantes UNIT_&lt;type&gt;.

Lève une erreur ValueError si une unité invalide est fournie.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="unfinished">getUnit() -&gt; entier (constante Scribus)

Retourne l&apos;unité de mesure du document. La valeur retournée sera l&apos;une des
constantes UNIT_* :
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="unfinished">loadStylesFromFile(&quot;fichier&quot;)

Charge les styles de paragraphe depuis le document Scribus nommé &quot;fichier&quot;.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="unfinished">closeMasterPage()

Ferme le gabarit actuellement actif, s&apos;il y en a un, et retourne au mode d&apos;édition
normal. L&apos;édition d&apos;un gabarit débute par editMasterPage().</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="unfinished">masterPageNames()

Retourne une liste contenant les noms des gabarits existant dans le document.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="unfinished">editMasterPage(nomGabarit)

Active l&apos;édition du gabarit nommé &quot;nomGabarit&quot;. L&apos;édition du gabarit se
termine par closeMasterPage().</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="unfinished">createMasterPage(nomGabarit)

Crée un nouveau gabarit nommé nomGabarit et l&apos;ouvre pour édition.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="unfinished">deleteMasterPage(nomGabarit)

Supprime le gabarit nommé nomGabarit.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getFillColor([&quot;nom&quot;]) -&gt; chaîne

Retourne le nom de la couleur de remplissage de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getLineColor([&quot;nom&quot;&quot;]) -&gt; chaîne

Retourne le nom de la couleur de filet de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished">getLineWidth([&quot;nom&quot;]) -&gt; entier

Retourne l&apos;épaisseur de filet de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="unfinished">getLineEnd([&quot;nom&quot;]) -&gt; entier (voir constantes)

Retourne le type de terminaison des filets de l&apos;objet &quot;nom&quot;. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.  Les types de terminaisons sont :
CAP_FLAT, CAP_ROUND, CAP_SQUARE</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="unfinished">getLineStyle([&quot;nom&quot;]) -&gt; entier (voir constantes)

Retourne le type de filet des filets de l&apos;objet &quot;nom&quot;. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.  Les types de filets sont :
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getImageScale([&quot;nom&quot;]) -&gt; (x,y)

Retourne un tuple (x,y) contenant les valeurs d&apos;échelle du cadre d&apos;image &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished">getImageName([&quot;nom&quot;]) -&gt; chaîne

Retourne le nom de fichier de l&apos;image présente dans le cadre d&apos;image &quot;nom&quot;. 
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="unfinished">getSize([&quot;nom&quot;]) -&gt; (hauteur,largeur)

Retourne un tuple (hauteur,largeur) contenant la taille de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé. La taille est 
exprimée dans l&apos;unité de mesure actuelle du document
- voir UNIT_&lt;type&gt; à titre de référence.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="unfinished">getRotation([&quot;nom&quot;]) -&gt; entier

Retourne l&apos;angle de rotation de l&apos;objet &quot;nom&quot;. La valeur est exprimée en degrés et est
positive pour une rotation dans le sens des aiguilles d&apos;une montre. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="unfinished">getAllObjects() -&gt; liste

Retourne une liste contenant les noms de tous les objets sur la page courante.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation type="unfinished">moveObject(dx, dy [, &quot;nom&quot;])

Déplace l&apos;objet &quot;nom&quot; de dx et dy relativement à sa position courante. Les
distances sont exprimées dans l&apos;unité courante de mesure du document (voir 
constantes d&apos;UNITÉS). Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.
Si l&apos;objet &quot;nom&quot; appartient à un groupe, le groupe entier est déplacé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="unfinished">moveObjectAbs(x, y [, &quot;nom&quot;])

Déplace l&apos;objet &quot;nom&quot; vers la nouvelle position. Les coordonnées sont à fournir dans l&apos;unité
de mesure actuelle du document (voir constantes UNIT).  Si &quot;nom&quot; est omis, l&apos;objet
actuellement sélectionné est utilisé.  Si l&apos;objet &quot;nom&quot; appartient à un groupe, le groupe
entier est déplacé. </translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished">sizeObject(hauteur, largeur [, &quot;nom&quot;])

Redimensionne l&apos;objet &quot;nom&quot; en lui attribuant &quot;hauteur&quot; et &quot;largeur&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="unfinished">getSelectedObject([nr]) -&gt; chaîne

Retourne le nom de l&apos;objet sélectionné. Si &quot;nr&quot; est fourni, il indique l&apos;objet 
sélectionné : 0 indique le premier objet sélectionné, 1 le second objet 
sélectionné et ainsi de suite.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="unfinished">selectionCount() -&gt; entier

Retourne le nombre d&apos;objets sélectionnés.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="unfinished">selectObject(&quot;nom&quot;)

Sélectionne l&apos;objet nommé &quot;nom&quot;.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="unfinished">deselectAll()

Désélectionne tous les objets dans le document entier.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="unfinished">groupObjects(liste)

Groupe les objets dont le nom est fourni dans &quot;liste&quot;. &quot;liste&quot; doit contenir le
nom des objets à grouper. Si &quot;liste&quot; est omis, les objets actuellement 
sélectionnés sont utilisés.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="unfinished">unGroupObjects(&quot;nom&quot;)

Détruit le groupe auquel l&apos;objet &quot;nom&quot; appartient. Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="unfinished">scaleGroup(facteur [,&quot;nom&quot;])

Modifie l&apos;échelle du groupe auquel l&apos;objet &quot;nom&quot; appartient. Les facteurs supérieurs
à 1 agrandissent le groupe, et les valeurs inférieures à 1 le réduisent; une valeur de
0.5 redimensionne le groupe à 50% de sa taille d&apos;origine, et une valeur de 1.5 le
redimensionne à 150% de sa taille d&apos;origine.  &quot;facteur&quot; doit être supérieur à 0.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.

Lève l&apos;erreur ValueError si un facteur invalide est fourni.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished">loadImage(&quot;fichier&quot; [, &quot;nom&quot;])

Charge l&apos;image &quot;fichier&quot; dans le cadre d&apos;image &quot;nom&quot;.  Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.

Lève l&apos;erreur WrongFrameTypeError si l&apos;objet n&apos;est pas un cadre d&apos;image
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished">scaleImage(x, y [, &quot;nom&quot;])

Définit la mise à l&apos;échelle de l&apos;image présente dans le cadre &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé. Une valeur de 1
signifie 100%

Lève l&apos;erreur WrongFrameTypeError si l&apos;objet n&apos;est pas un cadre d&apos;image
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="unfinished">lockObject([&quot;nom]) -&gt; booléen

Verrouille l&apos;objet &quot;nom&quot; s&apos;il est déverouillé, ou le déverouille s&apos;il est verrouillé.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé. 
Retourne vrai si l&apos;objet est verrouillé.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="unfinished">isLocked([&quot;nom&quot;]) -&gt; booléen

Retourne vrai si l&apos;objet &quot;nom&quot; est verrouillé. Si &quot;nom&quot; est omis, l&apos;objet 
actuellement sélectionné est utilisé. </translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="unfinished">setScaleImageToFrame(dimensionscadre, proportionnel=None, nom=&lt;selection&gt;)

Permet de mettre l&apos;image aux dimensions du cadre si &quot;dimensionscadre&quot; est vrai.
Si &quot;proportionnel&quot; est vrai, le ratio d&apos;aspect de l&apos;image est conservé.
&quot;dimensionscadre&quot; et &quot;proportionnel&quot; sont des booléens.

Peut lever l&apos;erreur WrongFrameTypeError.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation type="unfinished">setRedraw(booléen)

Désactive le rafraîchissement de l&apos;affichage si le booléen est faux, sinon le
rafraîchissement est actif. Ce changement persiste même après la fin du 
script, donc veillez à appeler setRedraw(True) dans une clause finally: au
début de votre script.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="unfinished">getFontNames() -&gt; liste

Retourne une liste contenant les noms de toutes les polices disponibles.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="unfinished">getXFontNames() -&gt; liste de tuples

Retourne la liste des polices avec les informations sous forme de tuples :
[ (nom Scribus, famille, nom réel, jeu partiel (1|0), incorporée PS (1|0), fichier de police), (...), ... ]
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="unfinished">getLayers() -&gt; liste

Retourne une liste contenant les noms de tous les calques définis.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">setActiveLayer(&quot;nom&quot;)

Rend actif le calque nommé &quot;nom&quot;.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;nom&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="unfinished">getActiveLayer() -&gt; chaîne

Retourne le nom du calque actuellement actif.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">sentToLayer(&quot;calque&quot; [, &quot;nom&quot;])

Envoit l&apos;objet nommé &quot;nom&quot; vers le calque &quot;calque&quot;. Le calque doit exister.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">setLayerVisible(&quot;calque&quot;, visible)

Définit la visibilité du calque &quot;calque&quot;. Si &quot;visible&quot; est faux, le calque
est invisible.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
        <source>setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
        <source>setLayerOutlined(&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
        <source>setLayerFlow(&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
        <source>setLayerBlendmode(&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
        <source>setLayerTransparency(&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">setLayerPrintable(&quot;calque&quot;, imprimable)

Définit si le calque &quot;calque&quot; sera imprimé. Si &quot;imprimable&quot; est faux
le calque ne sera pas imprimé.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">deleteLayer(&quot;calque&quot;)

Supprime le calque nomme &quot;calque&quot;. Sans effet si le calque n&apos;existe pas ou
s&apos;il s&apos;agit du seul calque du document.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished">createLayer(&quot;calque&quot;)

Crée un nouveau calque nommé &quot;calque&quot;.

Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="unfinished">getGuiLanguage() -&gt; chaîne

Retourne une chaîne indiquant la langue de l&apos;interface correspondant à l&apos;option -lang.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
        <source>moveSelectionToFront()

Moves current selection to front.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
        <source>moveSelectionToFront()

Moves current selection to back.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished">createRect(x, y, largeur, hauteur, [&quot;nom&quot;]) -&gt; chaîne

Crée un rectangle sur la page courante et retourne son nom. Les coordonnées
sont exprimées dans l&apos;unité courante de mesure du document (voir constantes 
d&apos;UNITÉS). &quot;nom&quot; doit être un identifiant unique pour l&apos;objet car il sert de référence
pour l&apos;objet. Si &quot;nom&quot; est omis, Scribus en attribuera un pour vous.

Peut lever une erreur NameExistsError si &quot;nom&quot; existe déjà.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
        <source>textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="unfinished">getAllStyles() -&gt; liste

Retourne une liste contenant les noms de tous les styles de paragraphes du document courant.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="unfinished">duplicateObject([&quot;nom&quot;]) -&gt; chaîne

Duplique l&apos;objet ou le groupe d&apos;objet actuellement sélectionné.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished">newPage(emplacement [,&quot;gabarit&quot;])

Crée une nouvelle page. Si &quot;emplacement&quot; vaut -1, la page est ajoutée à la fin
du document; dans le cas contraire, elle est insérée avant la page &quot;emplacement&quot;.
Les numéros de pages débutent à 1, indépendamment de la première page 
affichée du document. Le paramètre optionnel &quot;gabarit&quot; permet d&apos;affecter un gabarit
à la nouvelle page.

Peut lever une erreur IndexError si &quot;emplacement&quot; est hors plage</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="unfinished">currentPage() -&gt; entier

Retourne le numéro de page active. Les numéros de pages débutent à 1, indépendamment
du premier numéro de page affiché dans votre document.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="unfinished">redrawAll()

Rafraîchit l&apos;affichage de toutes les pages.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="unfinished">getPageType() -&gt; entier

Retourne le type de page, 0 pour page de gauche, 1 pour page centrale, et 2 pour page de droite
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="unfinished">pageCount() -&gt; entier

Retourne le nombre de pages dans le document.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
        <source>getVGuides()

See getHGuides.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
        <source>setVGuides()

See setHGuides.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
        <source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation type="unfinished">setGradientFill(type, &quot;couleur1&quot;, teinte1, &quot;couleur2&quot;, teinte2, [&quot;nom&quot;])

Définit le type de gradient de l&apos;objet &quot;nom&quot;. Les descriptions de couleurs sont
les mêmes que pour setFillColor() et setFillShade(). Référez-vous aux constantes
pour connaîtres les types de gradient (FILL_&lt;type&gt;).
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
        <source>createParagraphStyle(...)

Creates a paragraph style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create

linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:

fixed linespacing:          0

automatic linespacing:      1

baseline grid linespacing:  2

linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing

alignment [optional] -&gt; specifies the alignment of the paragraph

-&gt; left:     0

-&gt; center:   1

-&gt; right:    2

-&gt; justify:  3

-&gt; extend:   4

leftmargin [optional], rightmargin [optional] -&gt; specify the margin

gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs

firstindent [optional] -&gt; the indent of the first line

hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)

dropcaplines [optional] -&gt; height (in lines) of the caps if used

dropcapoffset [optional] -&gt; offset of the caps if used

&quot;charstyle&quot; [optional] -&gt; char style to use

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
        <source>createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline

-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished">getFontSize([&quot;nom&quot;]) -&gt; flottant

Retourne la taille de la police en points pour le cadre de texte &quot;nom&quot;. Si une
partie du texte du cadre est sélectionné, la valeur retournée est celle du
premier caractère de la sélection.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
        <source>getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
        <source>getTextDistances([&quot;name&quot;]) -&gt; tuple

Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
        <source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])

Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.

May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
        <source>hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
        <source>dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="unfinished">messagebarText(&quot;chaîne&quot;)

Ecrit la &quot;chaîne&quot; dans la barre de messages de Scribus (ligne de statut).
Le texte doit être encodé en UTF8 ou une chaîne &apos;unicode&apos; (recommendé).</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="unfinished">setCursor()

[NON SUPPORTÉ !] Cette fonction risque de créer des plantages. A éviter pour le moment.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="unfinished">docChanged(booléen)

Active/désactive l&apos;icône de sauvegarde dans la barre d&apos;icônes, ainsi que l&apos;entrée de 
menu &quot;enregistrer&quot;. Il est utile d&apos;appeler cette fonction lors de modifications dans le
document car Scribus ne détectera pas automatiquement que des changements
ont lieu lors de l&apos;utilisation d&apos;un script.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="unfinished">zoomDocument(double)

Change le niveau de zoom dans la fenêtre principale. Les valeurs à fournir
sont des nombres ronds comme 20.0, 100.0, ... Pour obtenir un zoom ajusté
à la taille de la fenêtre, la valeur est -100.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
        <source>scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="unfinished">placeSVG(&quot;fichier&quot;, x,y)

Positionne le fichier SVG &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du SVG

Si le chargement est réussi, la sélection contient le SVG importé
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="unfinished">placeEPS(&quot;fichier&quot;, x,y)

Positionne le fichier EPS &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du EPS

Si le chargement est réussi, la sélection contient l&apos;EPS importé
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="unfinished">placeSXD(&quot;fichier&quot;, x,y)

Positionne le fichier SXD &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du SXD

Si le chargement est réussi, la sélection contient le SXD importé
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="unfinished">placeODG(&quot;fichier&quot;, x,y)

Positionne le fichier ODG &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du ODG

Si le chargement est réussi, la sélection contient l&apos;ODG importé
</translation>
    </message>
</context>
<context>
    <name>@default</name>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="obsolete">getColorNames() -&gt; liste

Crée la liste des noms de toutes les couleurs définie dans le document.
S&apos;il n&apos;y a aucun document ouvert, la liste est composée des couleurs présentes par défaut.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="obsolete">newDocDialog() -&gt; booléen

Affiche la boîte de dialogue &quot;Nouveau document&quot;. Crée un nouveau document si
l&apos;utilisateur valide les réglages. Ne crée pas de document si l&apos;utilisateur clique sur
&quot;Annuler&quot;. Retourne vrai si un nouveau document est créé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFillColor([&quot;nom&quot;]) -&gt; chaîne

Retourne le nom de la couleur de remplissage de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObject(dx, dy [, &quot;nom&quot;])

Déplace l&apos;objet &quot;nom&quot; de dx et dy relativement à sa position courante. Les
distances sont exprimées dans l&apos;unité courante de mesure du document (voir 
constantes d&apos;UNITÉS). Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.
Si l&apos;objet &quot;nom&quot; appartient à un groupe, le groupe entier est déplacé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation type="obsolete">setRedraw(booléen)

Désactive le rafraîchissement de l&apos;affichage si le booléen est faux, sinon le
rafraîchissement est actif. Ce changement persiste même après la fin du 
script, donc veillez à appeler setRedraw(True) dans une clause finally: au
début de votre script.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="obsolete">createRect(x, y, largeur, hauteur, [&quot;nom&quot;]) -&gt; chaîne

Crée un rectangle sur la page courante et retourne son nom. Les coordonnées
sont exprimées dans l&apos;unité courante de mesure du document (voir constantes 
d&apos;UNITÉS). &quot;nom&quot; doit être un identifiant unique pour l&apos;objet car il sert de référence
pour l&apos;objet. Si &quot;nom&quot; est omis, Scribus en attribuera un pour vous.

Peut lever une erreur NameExistsError si &quot;nom&quot; existe déjà.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="obsolete">newPage(emplacement [,&quot;gabarit&quot;])

Crée une nouvelle page. Si &quot;emplacement&quot; vaut -1, la page est ajoutée à la fin
du document; dans le cas contraire, elle est insérée avant la page &quot;emplacement&quot;.
Les numéros de pages débutent à 1, indépendamment de la première page 
affichée du document. Le paramètre optionnel &quot;gabarit&quot; permet d&apos;affecter un gabarit
à la nouvelle page.

Peut lever une erreur IndexError si &quot;emplacement&quot; est hors plage</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation type="obsolete">setGradientFill(type, &quot;couleur1&quot;, teinte1, &quot;couleur2&quot;, teinte2, [&quot;nom&quot;])

Définit le type de gradient de l&apos;objet &quot;nom&quot;. Les descriptions de couleurs sont
les mêmes que pour setFillColor() et setFillShade(). Référez-vous aux constantes
pour connaîtres les types de gradient (FILL_&lt;type&gt;).
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getFontSize([&quot;nom&quot;]) -&gt; flottant

Retourne la taille de la police en points pour le cadre de texte &quot;nom&quot;. Si une
partie du texte du cadre est sélectionné, la valeur retournée est celle du
premier caractère de la sélection.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="obsolete">messagebarText(&quot;chaîne&quot;)

Ecrit la &quot;chaîne&quot; dans la barre de messages de Scribus (ligne de statut).
Le texte doit être encodé en UTF8 ou une chaîne &apos;unicode&apos; (recommendé).</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="obsolete">newDocument(taille, marges, orientation, numeroPremièrePage,
                       unité, typePages, positionPremièrePage) -&gt; booléen

Crée un nouveau document et retourne vrai en cas de succès. Les divers paramètres
ont la signification suivante :

taille : un tuple (hauteur, largeur) décrivant la taille du document. Il est possible
d&apos;utiliser des constantes prédéfinies nommées PAPER_&lt;paper_type&gt; (PAPER_A4...)

marges : un tuple (gauche, droite, haut, bas) décrivant les marges du
nouveau document

orientation : l&apos;orientation de la page - constantes PORTRAIT, LANDSCAPE

numeroPremièrePage : numéro de la première page du document, utilisé
pour la numérotation des pages. La plupart du temps, ce sera 1, mais
d&apos;autres valeurs peuvent se révéler utiles pour des documents découpés
en plusieurs parties.

unité : définit l&apos;unité de mesure utilisée dans ce document. Utiliser l&apos;une des
constantes prédéfinies pour cela : UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS. 
typePages : une des constantes prédéfinies PAGE_n. PAGE_1 pour des pages
simples, PAGE_2 pour des pages en regard, PAGE_3 pour 3 volets et
PAGE_4 pour 4 volets.

positionPremièrePage : position de la première page dans le document.
Démarre à 0 (0 = première page).

nombrePages : nombre de pages à créer.

Les valeurs de hauteur, largeur et de marges sont exprimées dans l&apos;unité
fournie pour le document. PAPER_* sont des constantes exprimées en points;
donc si l&apos;unité de votre document n&apos;est pas le point, il faut en tenir compte.

exemple: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,(new line)
PAGE_4, 3, 1)

Lève une erreur ScribusError si positionPremièrePage est plus grand que ce qui
est admissible par typePages.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="obsolete">placeSVG(&quot;fichier&quot;, x,y)

Positionne le fichier SVG &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du SVG

Si le chargement est réussi, la sélection contient le SVG importé
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColor(&quot;nom&quot;) -&gt; tuple

Retourne un tuple (C,M,J,N) contenant les quatre composantes de couleurs de
la couleur &quot;nom&quot; du document courant. Si aucun document n&apos;est ouvert,
retourne la valeur de la couleur &quot;nom&quot; des couleurs par défaut.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">getColorAsRGB(&quot;nom&quot;) -&gt; tuple

Retourne un tuple (R,V,B) contenant les trois composantes de couleurs de
la couleur &quot;nom&quot; du document courant, convertie dans l&apos;espace RVB. Si 
aucun document n&apos;est ouvert,retourne la valeur de la couleur &quot;nom&quot; des 
couleurs par défaut.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">changeColor(&quot;nom&quot;, c, m, j, k)

Change les valeurs c,m,j et n de la couleur &quot;nom&quot;. La couleur est définie par
les quatres composantes c = Cyan, m = Magenta, j = Jaune, N = Noir.
Chaque composante a une valeur comprise entre 0 et 255.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">deleteColor(&quot;nom&quot;, &quot;subsitution&quot;)

Supprime la couleur &quot;nom&quot;. Chaque occurrence de la couleur est remplacée
par la couleur &quot;substitution&quot;. Si cette dernière n&apos;est pas spécifiée, la couleur
de remplacement sera &quot;None&quot;, c&apos;est à dire transparent.

La fonction deleteColor travaille sur les couleurs par défaut si aucun document 
n&apos;est ouvert. Dans ce cas, &quot;substitution&quot; n&apos;a aucun effet.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="obsolete">replaceColor(&quot;nom&quot;, &quot;substitution&quot;)

Remplace chaque occurrence de la couleur &quot;nom&quot; par la couleur &quot;substitution&quot;.

Lève une erreur NotFoundError si la couleur n&apos;est pas trouvée.
Lève une erreur ValueError si le nom de couleur est invalide.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="obsolete">newStyleDialog() -&gt; chaîne

Affiche le dialogue de création d&apos;un nouveau style de paragraphe. 
Retourne le nom du nouveau style ou None si l&apos;utilisateur annule.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="obsolete">newDoc(taille, marges, orientation, numeroPremierePage,
                   unité, pagesRegard, firstSideLeft) -&gt; booléen

ATTENTION : FONCTION OBSOLETE, utiliser newDocument à la place !

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="obsolete">closeDoc()

Ferme le document en cours sans demande de confirmation de sauvegarde.

Lève l&apos;erreur NoDocOpenError s&apos;il n&apos;y a pas de document à fermer
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="obsolete">haveDoc() -&gt; booléen

Retourne vrai si un document est ouvert.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="obsolete">openDoc(&quot;nom&quot;)

Ouvre le document &quot;nom&quot;.

Lève l&apos;erreur ScribusError si le document ne peut pas être ouvert.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="obsolete">saveDoc()

Enregistre le document courant avec son nom actuel et retourne vrai en cas de succès.
Si le document n&apos;a pas encore été sauvegardé, le dialogue d&apos;enregistrement de fichiers
sera ouvert.

Il n&apos;y a actuellement pas de moyen de savoir si l&apos;enregistrement échoue.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="obsolete">saveDocAs(&quot;nom&quot;)

Enregistre le document courant sous le nom &quot;nom&quot; (qui peut contenir un chemin
complet ou relatif).

Lève l&apos;erreur ScribusError si l&apos;enregistrement échoue.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Left(lr), Right(rr), Top(tr) and Bottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="obsolete">setMargins(gr, dr, hr, br)

Définit les marges du document, gauche (gr), droite (dr), haut (hr) et bas (br)
Les marges utilisent l&apos;unité de mesure du document, voir les constantes
UNIT_&lt;type&gt;.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="obsolete">setUnit(type)

Change l&apos;unité de mesure du document. Les valeurs possibles pour l&apos;unité sont
définies par les constantes UNIT_&lt;type&gt;.

Lève une erreur ValueError si une unité invalide est fournie.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="obsolete">getUnit() -&gt; entier (constante Scribus)

Retourne l&apos;unité de mesure du document. La valeur retournée sera l&apos;une des
constantes UNIT_* :
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="obsolete">loadStylesFromFile(&quot;fichier&quot;)

Charge les styles de paragraphe depuis le document Scribus nommé &quot;fichier&quot;.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="obsolete">closeMasterPage()

Ferme le gabarit actuellement actif, s&apos;il y en a un, et retourne au mode d&apos;édition
normal. L&apos;édition d&apos;un gabarit débute par editMasterPage().</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="obsolete">masterPageNames()

Retourne une liste contenant les noms des gabarits existant dans le document.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="obsolete">editMasterPage(nomGabarit)

Active l&apos;édition du gabarit nommé &quot;nomGabarit&quot;. L&apos;édition du gabarit se
termine par closeMasterPage().</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="obsolete">createMasterPage(nomGabarit)

Crée un nouveau gabarit nommé nomGabarit et l&apos;ouvre pour édition.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="obsolete">deleteMasterPage(nomGabarit)

Supprime le gabarit nommé nomGabarit.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getLineColor([&quot;nom&quot;&quot;]) -&gt; chaîne

Retourne le nom de la couleur de filet de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="obsolete">getLineWidth([&quot;nom&quot;]) -&gt; entier

Retourne l&apos;épaisseur de filet de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../plugins/scriptplugin/cmdgetprop.h" line="102"/>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see contants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="obsolete">getLineJoin([&quot;nom&quot;]) -&gt; entier (voir constantes)

Retourne le type d&apos;angle des filets de l&apos;objet &quot;nom&quot;. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.  Les types d&apos;angles sont :
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="obsolete">getLineEnd([&quot;nom&quot;]) -&gt; entier (voir constantes)

Retourne le type de terminaison des filets de l&apos;objet &quot;nom&quot;. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.  Les types de terminaisons sont :
CAP_FLAT, CAP_ROUND, CAP_SQUARE</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="obsolete">getLineStyle([&quot;nom&quot;]) -&gt; entier (voir constantes)

Retourne le type de filet des filets de l&apos;objet &quot;nom&quot;. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.  Les types de filets sont :
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="obsolete">getImageScale([&quot;nom&quot;]) -&gt; (x,y)

Retourne un tuple (x,y) contenant les valeurs d&apos;échelle du cadre d&apos;image &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="obsolete">getImageName([&quot;nom&quot;]) -&gt; chaîne

Retourne le nom de fichier de l&apos;image présente dans le cadre d&apos;image &quot;nom&quot;. 
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="obsolete">getSize([&quot;nom&quot;]) -&gt; (hauteur,largeur)

Retourne un tuple (hauteur,largeur) contenant la taille de l&apos;objet &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé. La taille est 
exprimée dans l&apos;unité de mesure actuelle du document
- voir UNIT_&lt;type&gt; à titre de référence.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="obsolete">getRotation([&quot;nom&quot;]) -&gt; entier

Retourne l&apos;angle de rotation de l&apos;objet &quot;nom&quot;. La valeur est exprimée en degrés et est
positive pour une rotation dans le sens des aiguilles d&apos;une montre. Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="obsolete">getAllObjects() -&gt; liste

Retourne une liste contenant les noms de tous les objets sur la page courante.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="obsolete">moveObjectAbs(x, y [, &quot;nom&quot;])

Déplace l&apos;objet &quot;nom&quot; vers la nouvelle position. Les coordonnées sont à fournir dans l&apos;unité
de mesure actuelle du document (voir constantes UNIT).  Si &quot;nom&quot; est omis, l&apos;objet
actuellement sélectionné est utilisé.  Si l&apos;objet &quot;nom&quot; appartient à un groupe, le groupe
entier est déplacé. </translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="obsolete">sizeObject(hauteur, largeur [, &quot;nom&quot;])

Redimensionne l&apos;objet &quot;nom&quot; en lui attribuant &quot;hauteur&quot; et &quot;largeur&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="obsolete">getSelectedObject([nr]) -&gt; chaîne

Retourne le nom de l&apos;objet sélectionné. Si &quot;nr&quot; est fourni, il indique l&apos;objet 
sélectionné : 0 indique le premier objet sélectionné, 1 le second objet 
sélectionné et ainsi de suite.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="obsolete">selectionCount() -&gt; entier

Retourne le nombre d&apos;objets sélectionnés.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="obsolete">selectObject(&quot;nom&quot;)

Sélectionne l&apos;objet nommé &quot;nom&quot;.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="obsolete">deselectAll()

Désélectionne tous les objets dans le document entier.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="obsolete">groupObjects(liste)

Groupe les objets dont le nom est fourni dans &quot;liste&quot;. &quot;liste&quot; doit contenir le
nom des objets à grouper. Si &quot;liste&quot; est omis, les objets actuellement 
sélectionnés sont utilisés.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="obsolete">unGroupObjects(&quot;nom&quot;)

Détruit le groupe auquel l&apos;objet &quot;nom&quot; appartient. Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="obsolete">scaleGroup(facteur [,&quot;nom&quot;])

Modifie l&apos;échelle du groupe auquel l&apos;objet &quot;nom&quot; appartient. Les facteurs supérieurs
à 1 agrandissent le groupe, et les valeurs inférieures à 1 le réduisent; une valeur de
0.5 redimensionne le groupe à 50% de sa taille d&apos;origine, et une valeur de 1.5 le
redimensionne à 150% de sa taille d&apos;origine.  &quot;facteur&quot; doit être supérieur à 0.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.

Lève l&apos;erreur ValueError si un facteur invalide est fourni.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">loadImage(&quot;fichier&quot; [, &quot;nom&quot;])

Charge l&apos;image &quot;fichier&quot; dans le cadre d&apos;image &quot;nom&quot;.  Si &quot;nom&quot; est omis, 
l&apos;objet actuellement sélectionné est utilisé.

Lève l&apos;erreur WrongFrameTypeError si l&apos;objet n&apos;est pas un cadre d&apos;image
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="obsolete">scaleImage(x, y [, &quot;nom&quot;])

Définit la mise à l&apos;échelle de l&apos;image présente dans le cadre &quot;nom&quot;.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé. Une valeur de 1
signifie 100%

Lève l&apos;erreur WrongFrameTypeError si l&apos;objet n&apos;est pas un cadre d&apos;image
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="obsolete">lockObject([&quot;nom]) -&gt; booléen

Verrouille l&apos;objet &quot;nom&quot; s&apos;il est déverouillé, ou le déverouille s&apos;il est verrouillé.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé. 
Retourne vrai si l&apos;objet est verrouillé.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="obsolete">isLocked([&quot;nom&quot;]) -&gt; booléen

Retourne vrai si l&apos;objet &quot;nom&quot; est verrouillé. Si &quot;nom&quot; est omis, l&apos;objet 
actuellement sélectionné est utilisé. </translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="obsolete">setScaleImageToFrame(dimensionscadre, proportionnel=None, nom=&lt;selection&gt;)

Permet de mettre l&apos;image aux dimensions du cadre si &quot;dimensionscadre&quot; est vrai.
Si &quot;proportionnel&quot; est vrai, le ratio d&apos;aspect de l&apos;image est conservé.
&quot;dimensionscadre&quot; et &quot;proportionnel&quot; sont des booléens.

Peut lever l&apos;erreur WrongFrameTypeError.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="obsolete">getFontNames() -&gt; liste

Retourne une liste contenant les noms de toutes les polices disponibles.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="obsolete">getXFontNames() -&gt; liste de tuples

Retourne la liste des polices avec les informations sous forme de tuples :
[ (nom Scribus, famille, nom réel, jeu partiel (1|0), incorporée PS (1|0), fichier de police), (...), ... ]
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="obsolete">getLayers() -&gt; liste

Retourne une liste contenant les noms de tous les calques définis.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setActiveLayer(&quot;nom&quot;)

Rend actif le calque nommé &quot;nom&quot;.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;nom&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="obsolete">getActiveLayer() -&gt; chaîne

Retourne le nom du calque actuellement actif.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">sentToLayer(&quot;calque&quot; [, &quot;nom&quot;])

Envoit l&apos;objet nommé &quot;nom&quot; vers le calque &quot;calque&quot;. Le calque doit exister.
Si &quot;nom&quot; est omis, l&apos;objet actuellement sélectionné est utilisé.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerVisible(&quot;calque&quot;, visible)

Définit la visibilité du calque &quot;calque&quot;. Si &quot;visible&quot; est faux, le calque
est invisible.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">setLayerPrintable(&quot;calque&quot;, imprimable)

Définit si le calque &quot;calque&quot; sera imprimé. Si &quot;imprimable&quot; est faux
le calque ne sera pas imprimé.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">deleteLayer(&quot;calque&quot;)

Supprime le calque nomme &quot;calque&quot;. Sans effet si le calque n&apos;existe pas ou
s&apos;il s&apos;agit du seul calque du document.

Lève l&apos;erreur NotFoundError si le calque n&apos;est pas trouvé.
Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="obsolete">createLayer(&quot;calque&quot;)

Crée un nouveau calque nommé &quot;calque&quot;.

Lève l&apos;erreur ValueError si le format de &quot;calque&quot; n&apos;est pas correct.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="obsolete">getGuiLanguage() -&gt; chaîne

Retourne une chaîne indiquant la langue de l&apos;interface correspondant à l&apos;option -lang.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="obsolete">getAllStyles() -&gt; liste

Retourne une liste contenant les noms de tous les styles de paragraphes du document courant.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="obsolete">currentPage() -&gt; entier

Retourne le numéro de page active. Les numéros de pages débutent à 1, indépendamment
du premier numéro de page affiché dans votre document.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="obsolete">redrawAll()

Rafraîchit l&apos;affichage de toutes les pages.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="obsolete">pageCount() -&gt; entier

Retourne le nombre de pages dans le document.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="obsolete">setCursor()

[NON SUPPORTÉ !] Cette fonction risque de créer des plantages. A éviter pour le moment.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="obsolete">docChanged(booléen)

Active/désactive l&apos;icône de sauvegarde dans la barre d&apos;icônes, ainsi que l&apos;entrée de 
menu &quot;enregistrer&quot;. Il est utile d&apos;appeler cette fonction lors de modifications dans le
document car Scribus ne détectera pas automatiquement que des changements
ont lieu lors de l&apos;utilisation d&apos;un script.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="obsolete">zoomDocument(double)

Change le niveau de zoom dans la fenêtre principale. Les valeurs à fournir
sont des nombres ronds comme 20.0, 100.0, ... Pour obtenir un zoom ajusté
à la taille de la fenêtre, la valeur est -100.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="obsolete">duplicateObject([&quot;nom&quot;]) -&gt; chaîne

Duplique l&apos;objet ou le groupe d&apos;objet actuellement sélectionné.
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="obsolete">setInfo(&quot;auteur&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; booléen

Définit les informations du document. &quot;auteur&quot;, &quot;info&quot; et &quot;description&quot; sont 
des chaînes de caractères.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="obsolete">getPageType() -&gt; entier

Retourne le type de page, 0 pour page de gauche, 1 pour page centrale, et 2 pour page de droite
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="obsolete">placeEPS(&quot;fichier&quot;, x,y)

Positionne le fichier EPS &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du EPS

Si le chargement est réussi, la sélection contient l&apos;EPS importé
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="obsolete">placeSXD(&quot;fichier&quot;, x,y)

Positionne le fichier SXD &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du SXD

Si le chargement est réussi, la sélection contient le SXD importé
</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="obsolete">placeODG(&quot;fichier&quot;, x,y)

Positionne le fichier ODG &quot;fichier&quot; sur la page courante,
avec x et y étant les coordonnées de placement du point en haut à gauche du ODG

Si le chargement est réussi, la sélection contient l&apos;ODG importé
</translation>
    </message>
    <message>
        <location filename="../plugins/fileloader/scribus12format/scribus12format.cpp" line="1593"/>
        <source>Copy #%1 of </source>
        <translation type="obsolete">Copie #%1 de</translation>
    </message>
</context>
<context>
    <name>AIPlug</name>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="124"/>
        <source>Importing: %1</source>
        <translation type="unfinished">Importation : %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="127"/>
        <source>Analyzing File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="264"/>
        <source>Group%1</source>
        <translation type="unfinished">Groupe %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2226"/>
        <source>Generating Items</source>
        <translation type="unfinished">Création des objets</translation>
    </message>
</context>
<context>
    <name>About</name>
    <message>
        <location filename="../../scribus/about.cpp" line="97"/>
        <source>About Scribus %1</source>
        <translation>À propos de Scribus %1</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="124"/>
        <source>%1 %2 %3</source>
        <translation>%1 %2 %3</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="132"/>
        <source>%3-%2-%1 %4 %5</source>
        <translation>%3-%2-%1·%4·%5</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="182"/>
        <source>Using Ghostscript version %1</source>
        <translation>Utilisation de GhostScript version %1</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="184"/>
        <source>No Ghostscript version available</source>
        <translation>Aucune version de GhostScript disponible</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="132"/>
        <source>&lt;b&gt;Scribus Version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</source>
        <translation type="obsolete">&lt;b&gt;Scribus version %1&lt;/b&gt;&lt;p&gt;%2&lt;br/&gt;%3 %4&lt;br/&gt;%5&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="185"/>
        <source>Build ID:</source>
        <translation>Identifiant de compilation :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="187"/>
        <source>&amp;About</source>
        <translation>À &amp;propos</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="296"/>
        <source>Development Team:</source>
        <translation>Équipe de programmation :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="304"/>
        <source>Contributions from:</source>
        <translation>Contributions :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="298"/>
        <source>Mac OS&amp;#174; X Aqua Port:</source>
        <translation>Portage vers Mac OS&amp;#174; X Aqua :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="302"/>
        <source>Windows&amp;#174; Port:</source>
        <translation>Portage vers Windows&amp;#174; :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="306"/>
        <source>Official Documentation:</source>
        <translation>Documentation officielle :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="310"/>
        <source>Other Documentation:</source>
        <translation>Autre documentation :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="200"/>
        <source>A&amp;uthors</source>
        <translation>A&amp;uteurs</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="328"/>
        <source>Official Translations and Translators:</source>
        <translation>Traducteur(rice)s officiel(le)s :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="330"/>
        <source>Previous Translation Contributors:</source>
        <translation>Ancien(ne)s traducteur(rice)s :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="214"/>
        <source>&amp;Translations</source>
        <translation>&amp;Traductions</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="344"/>
        <source>Homepage</source>
        <translation>Site officiel</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="346"/>
        <source>Online Reference</source>
        <translation>Documentation en ligne</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="348"/>
        <source>Wiki</source>
        <translation>Wiki</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="350"/>
        <source>Bugs and Feature Requests</source>
        <translation>Rapports de bogues et demandes d&apos;améliorations</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="354"/>
        <source>Mailing List</source>
        <translation>Liste de diffusion</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="225"/>
        <source>&amp;Online</source>
        <translation>&amp;En ligne</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="264"/>
        <source>&amp;Close</source>
        <translation>&amp;Fermer</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="316"/>
        <source>Tango Project Icons:</source>
        <translation>Icônes du projet Tango :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="228"/>
        <source>&amp;Updates</source>
        <translation>Mises à jo&amp;ur</translation>
    </message>
    <message>
        <location filename="../about.cpp" line="411"/>
        <source>Check for &amp;Updates</source>
        <translation type="obsolete">Vérifier les mises à jo&amp;ur</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>This panel shows the version, build date and compiled in library support in Scribus. The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support. Last Letter is the renderer C=cairo or A=libart Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected. The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation type="obsolete">Ce panneau montre la version, la date de compilation et les bibliothèques compilées dans Scribus. Le symbole C-C-T-F indique le support de C=littlecms C=CUPS T=TIFF, F=Fontconfig. La dernière lettre représente le moteur de rendu, C=Cairo ou A=libArt. Les composantes manquantes sont indiquées par une étoile (*). La version de Ghostscript détectée par Scribus est également indiquée. La version Windows n&apos;utilise ni les librairies CUPS ni Fontconfig.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="276"/>
        <source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
        <translation>Vérifie les mises à jour de Scribus disponibles. Aucune donnée de votre ordinateur ne sera transférée.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="300"/>
        <source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
        <translation>Portage OS/2&amp;#174;/eComStation&amp;#8482; :</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="314"/>
        <source>Splash Screen:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="272"/>
        <source>This panel shows the version, build date and compiled in library support in Scribus.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="273"/>
        <source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="274"/>
        <source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="275"/>
        <source>The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="185"/>
        <source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="185"/>
        <source>Scribus Version</source>
        <translation type="unfinished">Version de Scribus</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="648"/>
        <source>Check for Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="646"/>
        <source>Abort Update Check</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="352"/>
        <source>Developer Blog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="239"/>
        <source>&amp;Licence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="248"/>
        <source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="308"/>
        <source>Doc Translators:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="312"/>
        <source>Webmasters:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="624"/>
        <source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AboutPlugins</name>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="68"/>
        <source>Filename:</source>
        <translation>Nom du fichier :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="69"/>
        <source>Version:</source>
        <translation>Version :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="72"/>
        <source>Enabled:</source>
        <translation>Activé :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="73"/>
        <source>Release Date:</source>
        <translation>Date de publication :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="80"/>
        <source>Description:</source>
        <translation>Description :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="81"/>
        <source>Author(s):</source>
        <translation>Auteur(s) :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="82"/>
        <source>Copyright:</source>
        <translation>Copyright :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="83"/>
        <source>License:</source>
        <translation>Licence :</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.ui" line="13"/>
        <source>Scribus: About Plug-ins</source>
        <translation type="unfinished">Scribus : À propos des extensions</translation>
    </message>
</context>
<context>
    <name>AboutPluginsBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Scribus: About Plug-ins</source>
        <translation type="obsolete">Scribus : À propos des extensions</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Fermer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>ActionManager</name>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1254"/>
        <source>&amp;New</source>
        <translation>&amp;Nouveau</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1255"/>
        <source>&amp;Open...</source>
        <translation>&amp;Ouvrir...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1256"/>
        <source>&amp;Close</source>
        <translation>&amp;Fermer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1257"/>
        <source>&amp;Save</source>
        <translation>&amp;Enregistrer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1258"/>
        <source>Save &amp;As...</source>
        <translation>Enregistrer &amp;sous...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1259"/>
        <source>Re&amp;vert to Saved</source>
        <translation>Re&amp;venir à la version précédente</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1260"/>
        <source>Collect for O&amp;utput...</source>
        <translation>R&amp;assembler les éléments pour la sortie...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1261"/>
        <source>Get Text...</source>
        <translation>Importer un texte...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1262"/>
        <source>Append &amp;Text...</source>
        <translation>Ajouter un &amp;texte...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1263"/>
        <source>Get Image...</source>
        <translation>Importer une image...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1266"/>
        <source>Save &amp;Text...</source>
        <translation>Enregistrer le &amp;texte...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1268"/>
        <source>Save as P&amp;DF...</source>
        <translation>Enregistrer en P&amp;DF...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1269"/>
        <source>Document &amp;Setup...</source>
        <translation>Ré&amp;glage du document...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1271"/>
        <source>&amp;Print...</source>
        <translation>Im&amp;primer...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1272"/>
        <source>Print Previe&amp;w</source>
        <translation>Aperç&amp;u avant impression</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1273"/>
        <source>&amp;Quit</source>
        <translation>&amp;Quitter</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1275"/>
        <source>&amp;Undo</source>
        <translation>Ann&amp;uler</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1276"/>
        <source>&amp;Redo</source>
        <translation>&amp;Rétablir</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1277"/>
        <source>&amp;Item Action Mode</source>
        <translation>Mode act&amp;ion</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1278"/>
        <source>Cu&amp;t</source>
        <translation>Cou&amp;per</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1281"/>
        <source>&amp;Copy</source>
        <translation>&amp;Copier</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1282"/>
        <source>&amp;Paste</source>
        <translation>Co&amp;ller</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1285"/>
        <source>Select &amp;All</source>
        <translation>&amp;Tout sélectionner</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1287"/>
        <source>&amp;Deselect All</source>
        <translation>Tout &amp;désélectionner</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1288"/>
        <source>&amp;Search/Replace...</source>
        <translation>Rechercher-&amp;Substituer...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1289"/>
        <source>Edit Image...</source>
        <translation>Editer l&apos;image...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1291"/>
        <source>C&amp;olors...</source>
        <translation>C&amp;ouleurs...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1294"/>
        <source>S&amp;tyles...</source>
        <translation>S&amp;tyles...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1295"/>
        <source>&amp;Master Pages...</source>
        <translation>&amp;Gabarits...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1296"/>
        <source>&amp;JavaScripts...</source>
        <translation>&amp;Javascripts...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1270"/>
        <source>P&amp;references...</source>
        <translation>Préféren&amp;ces...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1303"/>
        <source>%1 pt</source>
        <translation>%1 pt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1305"/>
        <source>&amp;Other...</source>
        <translation>&amp;Autre...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1306"/>
        <source>&amp;Left</source>
        <translation>&amp;Gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1307"/>
        <source>&amp;Center</source>
        <translation>&amp;Centré</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1308"/>
        <source>&amp;Right</source>
        <translation>&amp;Droite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1309"/>
        <source>&amp;Block</source>
        <translation>&amp;Justifié</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1310"/>
        <source>&amp;Forced</source>
        <translation>&amp;Forcé</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1294"/>
        <source>&amp;%1 %</source>
        <translation type="obsolete">&amp;%1 %</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1321"/>
        <source>&amp;Normal</source>
        <translation>&amp;Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1322"/>
        <source>&amp;Underline</source>
        <translation>&amp;Souligné</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1323"/>
        <source>Underline &amp;Words</source>
        <translation>Mots souli&amp;gnés</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1324"/>
        <source>&amp;Strike Through</source>
        <translation>&amp;Barré</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1325"/>
        <source>&amp;All Caps</source>
        <translation>&amp;Majuscules</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1326"/>
        <source>Small &amp;Caps</source>
        <translation>Petites &amp;capitales</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1327"/>
        <source>Su&amp;perscript</source>
        <translation>Ex&amp;posant</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1328"/>
        <source>Su&amp;bscript</source>
        <translation>In&amp;dice</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1329"/>
        <source>&amp;Outline</source>
        <comment>type effect</comment>
        <translation>Co&amp;ntour</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1330"/>
        <source>S&amp;hadow</source>
        <translation>&amp;Ombre</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1332"/>
        <source>&amp;Image Effects</source>
        <translation>&amp;Effets</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1333"/>
        <source>&amp;Tabulators...</source>
        <translation>&amp;Tabulations...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1336"/>
        <source>D&amp;uplicate</source>
        <translation>&amp;Dupliquer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1337"/>
        <source>&amp;Multiple Duplicate</source>
        <translation>Dupliquer-Déplacer &amp;multiples</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1338"/>
        <source>&amp;Delete</source>
        <translation>S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1339"/>
        <source>&amp;Group</source>
        <translation>&amp;Grouper</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1340"/>
        <source>&amp;Ungroup</source>
        <translation>Dégroup&amp;er</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1341"/>
        <source>Is &amp;Locked</source>
        <translation>&amp;Verrouillé</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1342"/>
        <source>Si&amp;ze is Locked</source>
        <translation>T&amp;aille verrouillée</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1343"/>
        <source>&amp;Printing Enabled</source>
        <translation>L&apos;im&amp;pression est activée</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1344"/>
        <source>&amp;Flip Horizontally</source>
        <translation>Retourner &amp;horizontalement</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1345"/>
        <source>&amp;Flip Vertically</source>
        <translation>Retourner &amp;verticalement</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1346"/>
        <source>Lower to &amp;Bottom</source>
        <translation>De haut en &amp;bas</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1347"/>
        <source>Raise to &amp;Top</source>
        <translation>Mettre au d&amp;essus</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1348"/>
        <source>&amp;Lower</source>
        <translation>Placer au-dess&amp;ous</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1349"/>
        <source>&amp;Raise</source>
        <translation>Placer au-dess&amp;us</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1350"/>
        <source>Send to S&amp;crapbook</source>
        <translation>Mettre dans l&apos;al&amp;bum</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1352"/>
        <source>&amp;Attributes...</source>
        <translation>A&amp;ttributs...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1353"/>
        <source>More Info...</source>
        <translation>Plus d&apos;informations...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1354"/>
        <source>I&amp;mage Visible</source>
        <translation>I&amp;mage visible</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1355"/>
        <source>&amp;Update Image</source>
        <translation>A&amp;ctualiser l&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1356"/>
        <source>Adjust Frame to Image</source>
        <translation>Adapter le cadre à l&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1358"/>
        <source>Extended Image Properties</source>
        <translation>Propriétés étendues de l&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1359"/>
        <source>&amp;Low Resolution</source>
        <translation>&amp;Basse résolution</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1360"/>
        <source>&amp;Normal Resolution</source>
        <translation>Résolution &amp;normale</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1361"/>
        <source>&amp;Full Resolution</source>
        <translation>&amp;Haute résolution :</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1362"/>
        <source>Is PDF &amp;Bookmark</source>
        <translation>&amp;Signet PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1363"/>
        <source>Is PDF A&amp;nnotation</source>
        <translation>A&amp;nnotation PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1364"/>
        <source>Annotation P&amp;roperties</source>
        <translation>Propriétés de l&apos;&amp;annotation</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1365"/>
        <source>Field P&amp;roperties</source>
        <translation>Propriétés du &amp;champ</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1366"/>
        <source>&amp;Edit Shape...</source>
        <translation>&amp;Modifier la forme...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1367"/>
        <source>&amp;Attach Text to Path</source>
        <translation>&amp;Joindre le texte au tracé</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1368"/>
        <source>&amp;Detach Text from Path</source>
        <translation>Détac&amp;her le texte du tracé</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1369"/>
        <source>&amp;Combine Polygons</source>
        <translation>Associer les pol&amp;ygones</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1370"/>
        <source>Split &amp;Polygons</source>
        <translation>Dissocier les &amp;polygones</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1371"/>
        <source>&amp;Bezier Curve</source>
        <translation>Courbe de &amp;Bézier</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1372"/>
        <source>&amp;Image Frame</source>
        <translation>Cadre d&apos;&amp;image</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1373"/>
        <source>&amp;Outlines</source>
        <comment>Convert to oulines</comment>
        <translation>&amp;Contours</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1374"/>
        <source>&amp;Polygon</source>
        <translation>&amp;Polygone</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1375"/>
        <source>&amp;Text Frame</source>
        <translation>Cadre de &amp;texte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1379"/>
        <source>&amp;Glyph...</source>
        <translation>&amp;Caractère...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1380"/>
        <source>Sample Text</source>
        <translation>Insérer un faux texte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1384"/>
        <source>&amp;Insert...</source>
        <translation>&amp;Insérer...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1385"/>
        <source>Im&amp;port...</source>
        <translation>I&amp;mporter...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1386"/>
        <source>&amp;Delete...</source>
        <translation>&amp;Effacer...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1387"/>
        <source>&amp;Copy...</source>
        <translation>&amp;Copier...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1388"/>
        <source>&amp;Move...</source>
        <translation>&amp;Déplacer...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1389"/>
        <source>&amp;Apply Master Page...</source>
        <translation>Appli&amp;quer un gabarit...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1390"/>
        <source>Convert to Master Page...</source>
        <translation>Convertir en gabarit...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1391"/>
        <source>Manage &amp;Guides...</source>
        <translation>&amp;Gestion des repères...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1392"/>
        <source>Manage Page Properties...</source>
        <translation>Propriétés de la page...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1397"/>
        <source>&amp;50%</source>
        <translation>&amp;50%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1398"/>
        <source>&amp;75%</source>
        <translation>&amp;75%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1399"/>
        <source>&amp;100%</source>
        <translation>1&amp;00%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1400"/>
        <source>&amp;200%</source>
        <translation>&amp;200%</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Thumbnails</source>
        <translation type="obsolete">Minia&amp;ture(s)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1403"/>
        <source>Show &amp;Margins</source>
        <translation>Afficher les &amp;marges</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1405"/>
        <source>Show &amp;Frames</source>
        <translation>Afficher les &amp;cadres</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1407"/>
        <source>Show &amp;Images</source>
        <translation>Afficher les &amp;images</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1408"/>
        <source>Show &amp;Grid</source>
        <translation>Afficher la &amp;grille</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1409"/>
        <source>Show G&amp;uides</source>
        <translation>Afficher les &amp;repères</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1411"/>
        <source>Show &amp;Baseline Grid</source>
        <translation>Afficher la grille t&amp;ypographique</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1412"/>
        <source>Show &amp;Text Chain</source>
        <translation>Afficher les &amp;liens entre cadres</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1413"/>
        <source>Show Control Characters</source>
        <translation>Afficher les caractères invisibles</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1414"/>
        <source>Show Rulers</source>
        <translation>Afficher la règle</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1399"/>
        <source>Rulers relative to Page</source>
        <translation type="obsolete">Guides relatifs à la page</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1416"/>
        <source>Sn&amp;ap to Grid</source>
        <translation>Grille m&amp;agnétique</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1417"/>
        <source>Sna&amp;p to Guides</source>
        <translation>Re&amp;pères magnétiques</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1422"/>
        <source>&amp;Properties</source>
        <translation>&amp;Propriétés</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1423"/>
        <source>&amp;Outline</source>
        <comment>Document Outline Palette</comment>
        <translation>Pla&amp;n du document</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1424"/>
        <source>&amp;Scrapbook</source>
        <translation>&amp;Album</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1425"/>
        <source>&amp;Layers</source>
        <translation>Ca&amp;lques</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1426"/>
        <source>&amp;Arrange Pages</source>
        <translation>&amp;Organiser les pages</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1427"/>
        <source>&amp;Bookmarks</source>
        <translation>&amp;Signets</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1428"/>
        <source>&amp;Measurements</source>
        <translation>M&amp;esurer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1429"/>
        <source>Action &amp;History</source>
        <translation>&amp;Historique des actions</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1430"/>
        <source>Preflight &amp;Verifier</source>
        <translation>&amp;Vérificateur</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1431"/>
        <source>&amp;Align and Distribute</source>
        <translation>Espacer et &amp;aligner</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1432"/>
        <source>&amp;Tools</source>
        <translation>Ou&amp;tils</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1433"/>
        <source>P&amp;DF Tools</source>
        <translation>Outils P&amp;DF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1436"/>
        <source>Select Item</source>
        <translation>Sélectionner un objet</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1351"/>
        <source>T&amp;able</source>
        <translation type="obsolete">T&amp;ableau</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1352"/>
        <source>&amp;Shape</source>
        <translation type="obsolete">Forme (&amp;S)</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1354"/>
        <source>&amp;Line</source>
        <translation type="obsolete">Fi&amp;let</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1356"/>
        <source>&amp;Freehand Line</source>
        <translation type="obsolete">Ligne à main levée (&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1437"/>
        <source>Rotate Item</source>
        <translation>Rotation de l&apos;objet</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1438"/>
        <source>Zoom in or out</source>
        <translation>Agrandissement ou réduction</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1439"/>
        <source>Zoom in</source>
        <translation>Zoom avant</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1440"/>
        <source>Zoom out</source>
        <translation>Zoom arrière</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1441"/>
        <source>Edit Contents of Frame</source>
        <translation>Éditer le contenu du cadre</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1442"/>
        <source>Edit Text...</source>
        <translation>Modifier le texte...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1443"/>
        <source>Link Text Frames</source>
        <translation>Lier les cadres de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1444"/>
        <source>Unlink Text Frames</source>
        <translation>Délier les cadres de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1445"/>
        <source>&amp;Eye Dropper</source>
        <translation>Pip&amp;ette à couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1446"/>
        <source>Copy Item Properties</source>
        <translation>Copier les propriétés de l&apos;objet</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1368"/>
        <source>Edit the text with the Story Editor</source>
        <translation type="obsolete">Modifier le texte avec l&apos;éditeur interne</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1370"/>
        <source>Insert Text Frame</source>
        <translation type="obsolete">Insérer un cadre de texte</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1371"/>
        <source>Insert Image Frame</source>
        <translation type="obsolete">Insérer un cadre d&apos;image</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1372"/>
        <source>Insert Table</source>
        <translation type="obsolete">Insérer un tableau</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1373"/>
        <source>Insert Shape</source>
        <translation type="obsolete">Insérer une forme</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1374"/>
        <source>Insert Polygon</source>
        <translation type="obsolete">Insérer un polygone</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1375"/>
        <source>Insert Line</source>
        <translation type="obsolete">Insérer un filet</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1376"/>
        <source>Insert Bezier Curve</source>
        <translation type="obsolete">Insérer une courbe de Bézier</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1377"/>
        <source>Insert Freehand Line</source>
        <translation type="obsolete">Dessiner une ligne à main levée</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1412"/>
        <source>&amp;Manage Pictures</source>
        <translation type="obsolete">&amp;Gestion des images</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1469"/>
        <source>&amp;Hyphenate Text</source>
        <translation>Effectuer les &amp;césures</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1470"/>
        <source>Dehyphenate Text</source>
        <translation>Défaire les césures</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1471"/>
        <source>&amp;Generate Table Of Contents</source>
        <translation>Générer la &amp;table des matières</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1474"/>
        <source>&amp;Cascade</source>
        <translation>&amp;Cascade</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1475"/>
        <source>&amp;Tile</source>
        <translation>&amp;Mosaïque</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1478"/>
        <source>&amp;About Scribus</source>
        <translation>À &amp;propos de Scribus</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1423"/>
        <source>&amp;About Plug-ins</source>
        <translation type="obsolete">&amp;A propos des extensions</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1480"/>
        <source>About &amp;Qt</source>
        <translation>À propos de &amp;Qt</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1481"/>
        <source>Toolti&amp;ps</source>
        <translation>Info&amp;bulles</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1483"/>
        <source>Scribus &amp;Manual...</source>
        <translation>&amp;Manuel de Scribus...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1491"/>
        <source>Toggle Palettes</source>
        <translation>Afficher les palettes</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1492"/>
        <source>Toggle Guides</source>
        <translation>Afficher les repères</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1501"/>
        <source>Smart &amp;Hyphen</source>
        <translation>Trait d&apos;&amp;union conditionnel</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1502"/>
        <source>Non Breaking Dash</source>
        <translation>Trait d&apos;union insécable</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1503"/>
        <source>Non Breaking &amp;Space</source>
        <translation>Espace in&amp;sécable</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1504"/>
        <source>Page &amp;Number</source>
        <translation>&amp;Numéro de page</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1506"/>
        <source>New Line</source>
        <translation>Saut de ligne</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1507"/>
        <source>Frame Break</source>
        <translation>Saut de cadre</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1508"/>
        <source>Column Break</source>
        <translation>Saut de colonne</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1511"/>
        <source>Copyright</source>
        <translation>Symbole Copyright</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1512"/>
        <source>Registered Trademark</source>
        <translation>Marque déposée enregistrée</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1513"/>
        <source>Trademark</source>
        <translation>Marque déposée</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1514"/>
        <source>Solidus</source>
        <translation>Barre oblique</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1515"/>
        <source>Bullet</source>
        <translation>Puce</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1516"/>
        <source>Middle Dot</source>
        <translation>Point médian</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1517"/>
        <source>Em Dash</source>
        <translation>Tiret cadratin</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1518"/>
        <source>En Dash</source>
        <translation>Tiret demi-cadratin</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1519"/>
        <source>Figure Dash</source>
        <translation>Tiret numérique</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1520"/>
        <source>Quotation Dash</source>
        <translation>Barre horizontale</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1541"/>
        <source>En Space</source>
        <translation>Demi-cadratin</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1542"/>
        <source>Em Space</source>
        <translation>Cadratin</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1543"/>
        <source>Thin Space</source>
        <translation>Espace fine</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1544"/>
        <source>Thick Space</source>
        <translation>Espace forte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1545"/>
        <source>Mid Space</source>
        <translation>Espace moyenne</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1546"/>
        <source>Hair Space</source>
        <translation>Espace ultrafine</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1461"/>
        <source>Insert Smart Hyphen</source>
        <translation type="obsolete">Insérer un trait d&apos;union conditionnel</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1462"/>
        <source>Insert Non Breaking Dash</source>
        <translation type="obsolete">Insérer un trait d&apos;union insécable</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1463"/>
        <source>Insert Non Breaking Space</source>
        <translation type="obsolete">Insérer une espace insécable</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1464"/>
        <source>Insert Page Number</source>
        <translation type="obsolete">Insérer le folio</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1558"/>
        <source>ff</source>
        <translation>ff</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1559"/>
        <source>fi</source>
        <translation>fi</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1560"/>
        <source>fl</source>
        <translation>fl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1561"/>
        <source>ffi</source>
        <translation>ffi</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1562"/>
        <source>ffl</source>
        <translation>ffl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1563"/>
        <source>ft</source>
        <translation>ft</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1564"/>
        <source>st</source>
        <translation>st</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1283"/>
        <source>Paste (&amp;Absolute)</source>
        <translation>Coller (&amp;absolu)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1284"/>
        <source>C&amp;lear</source>
        <translation>&amp;Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1458"/>
        <source>Insert PDF Push Button</source>
        <translation>Insérer un bouton poussoir PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1459"/>
        <source>Insert PDF Text Field</source>
        <translation>Insérer un champ texte PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1460"/>
        <source>Insert PDF Check Box</source>
        <translation>Insérer une case à cocher PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1461"/>
        <source>Insert PDF Combo Box</source>
        <translation>Insérer une zone de liste PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1462"/>
        <source>Insert PDF List Box</source>
        <translation>Insérer une liste déroulante PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1463"/>
        <source>Insert Text Annotation</source>
        <translation>Insérer une annotation de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1464"/>
        <source>Insert Link Annotation</source>
        <translation>Insérer une annotation de lien</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1267"/>
        <source>Save as &amp;EPS...</source>
        <translation>Enregistrer en &amp;EPS...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1410"/>
        <source>Show Text Frame Columns</source>
        <translation>Afficher les colonnes des cadres de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1378"/>
        <source>&amp;Frame...</source>
        <translation>&amp;Cadre...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1402"/>
        <source>Preview Mode</source>
        <translation>Mode aperçu</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1406"/>
        <source>Show Layer Indicators</source>
        <translation>Afficher les indicateurs de calques</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1293"/>
        <source>Patterns...</source>
        <translation>Motifs...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1351"/>
        <source>Send to Patterns</source>
        <translation>Envoyer vers les motifs</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1381"/>
        <source>Sticky Tools</source>
        <translation>Outils persistants</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1395"/>
        <source>&amp;Fit to Height</source>
        <translation>Ajuster à la &amp;hauteur</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1396"/>
        <source>Fit to Width</source>
        <translation>Ajuster à la largeur</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1404"/>
        <source>Show Bleeds</source>
        <translation>Afficher le fond perdu</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1509"/>
        <source>&amp;Zero Width Space</source>
        <translation>Espace de largeur &amp;nulle</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1510"/>
        <source>Zero Width NB Space</source>
        <translation>Espace NB de largeur nulle</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1522"/>
        <source>Apostrophe</source>
        <comment>Unicode 0x0027</comment>
        <translation>Guillemet APL</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1523"/>
        <source>Straight Double</source>
        <comment>Unicode 0x0022</comment>
        <translation>Guillemet dactylographique</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1524"/>
        <source>Single Left</source>
        <comment>Unicode 0x2018</comment>
        <translation>Apostrophe culbutée</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1525"/>
        <source>Single Right</source>
        <comment>Unicode 0x2019</comment>
        <translation>Apostrophe</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1526"/>
        <source>Double Left</source>
        <comment>Unicode 0x201C</comment>
        <translation>Guillemet anglais ouvrant</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1527"/>
        <source>Double Right</source>
        <comment>Unicode 0x201D</comment>
        <translation>Guillemet anglais fermant</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1528"/>
        <source>Single Reversed</source>
        <comment>Unicode 0x201B</comment>
        <translation>Guillemet-virgule</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1529"/>
        <source>Double Reversed</source>
        <comment>Unicode 0x201F</comment>
        <translation>Guillemet-virgule double</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1530"/>
        <source>Single Left Guillemet</source>
        <comment>Unicode 0x2039</comment>
        <translation>Guillemet simple vers la gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1531"/>
        <source>Single Right Guillemet</source>
        <comment>Unicode 0x203A</comment>
        <translation>Guillemet simple vers la droite</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1532"/>
        <source>Double Left Guillemet</source>
        <comment>Unicode 0x00AB</comment>
        <translation>Guillemet français ouvrant</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1533"/>
        <source>Double Right Guillemet</source>
        <comment>Unicode 0x00BB</comment>
        <translation>Guillemet français fermant</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1534"/>
        <source>Low Single Comma</source>
        <comment>Unicode 0x201A</comment>
        <translation>Virgule</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1535"/>
        <source>Low Double Comma</source>
        <comment>Unicode 0x201E</comment>
        <translation>Virgule double</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1536"/>
        <source>CJK Single Left</source>
        <comment>Unicode 0x300C</comment>
        <translation>Apostrophe gauche CJC</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1537"/>
        <source>CJK Single Right</source>
        <comment>Unicode 0x300D</comment>
        <translation>Apostrophe droit CJC</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1538"/>
        <source>CJK Double Left</source>
        <comment>Unicode 0x300E</comment>
        <translation>Guillemet gauche CJC</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1539"/>
        <source>CJK Double Right</source>
        <comment>Unicode 0x300F</comment>
        <translation>Guillemet droit CJC</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1401"/>
        <source>&amp;400%</source>
        <translation type="unfinished">&amp;200% {400%?}</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1448"/>
        <source>Insert &amp;Text Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1449"/>
        <source>Insert &amp;Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1451"/>
        <source>Insert T&amp;able</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1452"/>
        <source>Insert &amp;Shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1453"/>
        <source>Insert &amp;Polygon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1454"/>
        <source>Insert &amp;Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1455"/>
        <source>Insert &amp;Bezier Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1456"/>
        <source>Insert &amp;Freehand Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1484"/>
        <source>Scribus Homepage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1485"/>
        <source>Scribus Online Documentation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1486"/>
        <source>Scribus Wiki</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1487"/>
        <source>Getting Started with Scribus</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1418"/>
        <source>Show Context Menu</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1468"/>
        <source>&amp;Manage Images</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1479"/>
        <source>&amp;About Plugins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1493"/>
        <source>Insert Unicode Character Begin Sequence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1264"/>
        <source>Get Vector File...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1286"/>
        <source>Advanced Select All...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1290"/>
        <source>Edit Source...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1292"/>
        <source>Replace Colors...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1415"/>
        <source>Rulers Relative to Page</source>
        <translation type="unfinished">Guides relatifs à la page</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1450"/>
        <source>Insert &amp;Render Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1488"/>
        <source>Check for Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1505"/>
        <source>Number of Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1357"/>
        <source>Adjust Image to Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1685"/>
        <source>File</source>
        <translation type="unfinished">Fichier</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1685"/>
        <source>&amp;File</source>
        <translation type="unfinished">&amp;Fichier</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1687"/>
        <source>Edit</source>
        <translation type="unfinished">Modifier</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1687"/>
        <source>&amp;Edit</source>
        <translation type="unfinished">É&amp;dition</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1689"/>
        <source>Style</source>
        <translation type="unfinished">Style</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1689"/>
        <source>&amp;Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1691"/>
        <source>Item</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1691"/>
        <source>&amp;Item</source>
        <translation type="unfinished">&amp;Objet</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1693"/>
        <source>Insert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1693"/>
        <source>I&amp;nsert</source>
        <translation type="unfinished">&amp;Insérer</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1695"/>
        <source>Page</source>
        <translation type="unfinished">Page</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1695"/>
        <source>&amp;Page</source>
        <translation type="unfinished">&amp;Page</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1697"/>
        <source>View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1697"/>
        <source>&amp;View</source>
        <translation type="unfinished">&amp;Affichage</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1699"/>
        <source>Extras</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1699"/>
        <source>E&amp;xtras</source>
        <translation type="unfinished">E&amp;xtra</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1701"/>
        <source>Windows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1701"/>
        <source>&amp;Windows</source>
        <translation type="unfinished">Fe&amp;nêtres</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1703"/>
        <source>Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1703"/>
        <source>&amp;Help</source>
        <translation type="unfinished">A&amp;ide</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1871"/>
        <source>Plugin Menu Items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1873"/>
        <source>Others</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1875"/>
        <source>Unicode Characters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1482"/>
        <source>Move/Resize Value Indicator</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AdjustCmsDialog</name>
    <message>
        <location filename="../../scribus/adjustcmsdialog.cpp" line="16"/>
        <source>CMS Settings</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignDistribute</name>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="35"/>
        <source>Align</source>
        <translation type="unfinished">Aligner</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="79"/>
        <source>&amp;Selected Guide:</source>
        <translation type="unfinished">Repère sélectionné</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="92"/>
        <source>&amp;Relative To:</source>
        <translation type="unfinished">&amp;Relatif à :</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="431"/>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="270"/>
        <source>Distribute</source>
        <translation type="unfinished">Espacer</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="490"/>
        <source>&amp;Distance:</source>
        <translation type="unfinished">&amp;Distance :</translation>
    </message>
</context>
<context>
    <name>AlignDistributeBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Align and Distribute</source>
        <translation type="obsolete">Espacer - Aligner</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Align</source>
        <translation type="obsolete">Aligner</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Selected Guide:</source>
        <translation type="obsolete">Repère sélectionné</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Relative To:</source>
        <translation type="obsolete">&amp;Relatif à :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>...</source>
        <translation type="obsolete">...</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Distribute</source>
        <translation type="obsolete">Espacer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Distance:</source>
        <translation type="obsolete">&amp;Distance :</translation>
    </message>
</context>
<context>
    <name>AlignDistributePalette</name>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="90"/>
        <source>Align and Distribute</source>
        <translation>Espacer - Aligner</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="91"/>
        <source>Align</source>
        <translation>Aligner</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="93"/>
        <source>&amp;Relative to:</source>
        <translation>En &amp;rapport avec :</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="96"/>
        <source>First Selected</source>
        <translation>Premier objet sélectionné</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="97"/>
        <source>Last Selected</source>
        <translation>Dernier objet sélectionné</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="98"/>
        <source>Page</source>
        <translation>Page</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="99"/>
        <source>Margins</source>
        <translation>Marges</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="100"/>
        <source>Guide</source>
        <translation>Repère</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="101"/>
        <source>Selection</source>
        <translation>Sélection</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="111"/>
        <source>Align bottoms</source>
        <translation>Aligner le bas des objets</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="113"/>
        <source>Align right sides</source>
        <translation>Aligner les côtés droits</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="117"/>
        <source>Center on vertical axis</source>
        <translation>Centrer sur l&apos;axe vertical</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="119"/>
        <source>Align left sides</source>
        <translation>Aligner les côtés gauches</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="121"/>
        <source>Center on horizontal axis</source>
        <translation>Centrer sur l&apos;axe horizontal</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="125"/>
        <source>Align tops</source>
        <translation>Aligner le haut des objets</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="127"/>
        <source>&amp;Selected Guide:</source>
        <translation>Repère sélectionné</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="92"/>
        <source>Distribute</source>
        <translation>Espacer</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="135"/>
        <source>Distribute right sides equidistantly</source>
        <translation>Distribuer les côtés droits de manière équidistante</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="137"/>
        <source>Distribute bottoms equidistantly</source>
        <translation>Distribution régulière en bas</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="139"/>
        <source>Distribute centers equidistantly horizontally</source>
        <translation>Distribution régulière des centres</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="145"/>
        <source>Distribute left sides equidistantly</source>
        <translation>Distribution régulière des côtés gauches</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="147"/>
        <source>Distribute centers equidistantly vertically</source>
        <translation>Distribution régulière verticale des centres</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="149"/>
        <source>Distribute tops equidistantly</source>
        <translation>Distribution régulière en haut</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="159"/>
        <source>&amp;Distance:</source>
        <translation>&amp;Distance :</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="160"/>
        <source>Distribute the items with the distance specified</source>
        <translation>Distribution des objets à la distance spécifiée</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="162"/>
        <source>None Selected</source>
        <translation>Aucune sélection</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="443"/>
        <source>Y: %1%2</source>
        <translation>Y : %1 %2</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="451"/>
        <source>X: %1%2</source>
        <translation>X : %1 %2</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="107"/>
        <source>Align right sides of items to left side of anchor</source>
        <translation>Aligner le côté droit des objets à la gauche de l&apos;ancre</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="109"/>
        <source>Align left sides of items to right side of anchor</source>
        <translation>Aligner le côté gauche des objets à la droite de l&apos;ancre</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="115"/>
        <source>Align tops of items to bottom of anchor</source>
        <translation>Aligner le haut des objets avec le bas de l&apos;ancre</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="123"/>
        <source>Align bottoms of items to top of anchor</source>
        <translation>Aligner le bas des objets avec le haut de l&apos;ancre</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="130"/>
        <source>Make horizontal gaps between items equal</source>
        <translation>Egalise les espaces horizontaux entre les objets</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="132"/>
        <source>Make horizontal gaps between items equal to the value specified</source>
        <translation>Espace horizontalement les objets de la valeur entrée</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="141"/>
        <source>Make vertical gaps between items equal</source>
        <translation>Egalise les espaces verticaux entre les objets</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="143"/>
        <source>Make vertical gaps between items equal to the value specified</source>
        <translation>Espace verticalement les objets de la valeur entrée</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="151"/>
        <source>Make horizontal gaps between items and sides of page equal</source>
        <translation>Egalise l&apos;espace horizontal entre les objets et les bords de la page</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="157"/>
        <source>Make vertical gaps between items and the top and bottom of page margins equal</source>
        <translation>Règle l&apos;espace vertical entre les objets et les marges à la valeur entrée</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="155"/>
        <source>Make horizontal gaps between items and sides of page margins equal</source>
        <translation>Egalise l&apos;espace horizontal entre les objets et les marges</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="153"/>
        <source>Make vertical gaps between items and the top and bottom of page equal</source>
        <translation>Règle l&apos;espace vertical entre les objets et les bords de la page à la valeur entrée</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="103"/>
        <source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="105"/>
        <source>The location of the selected guide to align to</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AlignSelect</name>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="110"/>
        <source>Align Text Left</source>
        <translation>Texte aligné à gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="111"/>
        <source>Align Text Right</source>
        <translation>Texte aligné à droite</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="112"/>
        <source>Align Text Center</source>
        <translation>Texte centré</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="113"/>
        <source>Align Text Justified</source>
        <translation>Texte justifié</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="114"/>
        <source>Align Text Forced Justified</source>
        <translation>Justification forcée</translation>
    </message>
</context>
<context>
    <name>Annot</name>
    <message>
        <location filename="../../scribus/annot.cpp" line="61"/>
        <source>Field Properties</source>
        <translation>Propriétés du champ</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="533"/>
        <source>Type:</source>
        <translation>Type :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Button</source>
        <translation>Bouton</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Text Field</source>
        <translation>Champ de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Check Box</source>
        <translation>Case à cocher</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Combo Box</source>
        <translation>Menu déroulant</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>List Box</source>
        <translation>Liste</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="111"/>
        <source>Properties</source>
        <translation>Propriétés</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="121"/>
        <source>Name:</source>
        <translation>Nom :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="274"/>
        <source>Text</source>
        <translation>Texte</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="152"/>
        <source>Font for use with PDF 1.3:</source>
        <translation>Police à utiliser pour le format PDF 1.3 :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="176"/>
        <source>Border</source>
        <translation>Bord</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="182"/>
        <source>Color:</source>
        <translation>Couleur :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="197"/>
        <source>Width:</source>
        <translation>Largeur :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="201"/>
        <source>Thin</source>
        <translation>Mince</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="311"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="201"/>
        <source>Wide</source>
        <translation>Large</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="209"/>
        <source>Style:</source>
        <translation>Style :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="213"/>
        <source>Solid</source>
        <translation>Plein</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="213"/>
        <source>Dashed</source>
        <translation>Pointillé</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="213"/>
        <source>Underline</source>
        <translation>Souligné</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="214"/>
        <source>Beveled</source>
        <translation>Biseauté</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="214"/>
        <source>Inset</source>
        <translation>Creux</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="224"/>
        <source>Other</source>
        <translation>Autre</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="230"/>
        <source>Read Only</source>
        <translation>Lecture seule</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="236"/>
        <source>Required</source>
        <translation>Nécessaire</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="248"/>
        <source>Visibility:</source>
        <translation>Visibilité :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="252"/>
        <source>Visible</source>
        <translation>Visible</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="252"/>
        <source>Hidden</source>
        <translation>Caché</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="252"/>
        <source>No Print</source>
        <translation>Non imprimable</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="253"/>
        <source>No View</source>
        <translation>Invisible</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="262"/>
        <source>Appearance</source>
        <translation>Aspect</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="280"/>
        <source>Text for Button Down</source>
        <translation>Texte pour le bouton bas</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="283"/>
        <source>Text for Roll Over</source>
        <translation>Texte pour l&apos;effet de survol (rollover)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="294"/>
        <source>Icons</source>
        <translation>Icônes</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="300"/>
        <source>Use Icons</source>
        <translation>Utiliser les icônes</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="357"/>
        <source>Remove</source>
        <translation>Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="329"/>
        <source>Pressed</source>
        <translation>Appuyé</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="347"/>
        <source>Roll Over</source>
        <translation>Effet de survol (rollover)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="366"/>
        <source>Icon Placement...</source>
        <translation>Position des icônes...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="414"/>
        <source>Highlight</source>
        <translation>Surligné</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>None</source>
        <comment>highlight</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>Invert</source>
        <translation>Inverser</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>Outlined</source>
        <translation>Souligné</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>Push</source>
        <translation>Pousser</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="438"/>
        <source>Multi-Line</source>
        <translation>Multi-ligne</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="442"/>
        <source>Password</source>
        <translation>Mot de passe</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="449"/>
        <source>Limit of</source>
        <translation>Limite de</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="460"/>
        <source>Characters</source>
        <translation>Caractères</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="466"/>
        <source>Do Not Scroll</source>
        <translation>Ne pas dérouler</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="470"/>
        <source>Do Not Spell Check</source>
        <translation>Ne pas vérifier l&apos;orthographe</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="485"/>
        <source>Check Style:</source>
        <translation>Type de case :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Check</source>
        <translation>Coche</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Cross</source>
        <translation>Croix</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Diamond</source>
        <translation>Diamant</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Circle</source>
        <translation>Rond</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Star</source>
        <translation>Étoile</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Square</source>
        <translation>Carré</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="502"/>
        <source>Default is Checked</source>
        <translation>Cochée par défaut</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="514"/>
        <source>Editable</source>
        <translation>Modifiable</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="521"/>
        <source>Options</source>
        <translation>Options</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2050"/>
        <source>None</source>
        <comment>action</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2088"/>
        <source>JavaScript</source>
        <translation>JavaScript</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2050"/>
        <source>Go To</source>
        <translation>Aller à</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2051"/>
        <source>Submit Form</source>
        <translation>Envoyer le formulaire</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2051"/>
        <source>Reset Form</source>
        <translation>Formulaire vierge</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2051"/>
        <source>Import Data</source>
        <translation>Importer des données</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="570"/>
        <source>Event:</source>
        <translation>Événement :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2030"/>
        <source>Mouse Up</source>
        <translation>Bouton souris relâché</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2030"/>
        <source>Mouse Down</source>
        <translation>Bouton souris enfoncé</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2030"/>
        <source>Mouse Enter</source>
        <translation>Entrée souris</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2031"/>
        <source>Mouse Exit</source>
        <translation>Sortie souris</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2031"/>
        <source>On Focus</source>
        <translation>Au centre</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2031"/>
        <source>On Blur</source>
        <translation>Autour</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="585"/>
        <source>Script:</source>
        <translation>Script :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1095"/>
        <source>Edit...</source>
        <translation>Modifier...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="670"/>
        <source>Submit to URL:</source>
        <translation>URL :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="678"/>
        <source>Submit Data as HTML</source>
        <translation>Envoyer les données en HTML</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="691"/>
        <source>Import Data from:</source>
        <translation>Importer les données depuis :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="610"/>
        <source>Destination</source>
        <translation>Destination</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="616"/>
        <source>To File:</source>
        <translation>Vers :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="623"/>
        <source>Change...</source>
        <translation>Parcourir...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="632"/>
        <source>Page:</source>
        <translation>Page :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="646"/>
        <source>X-Pos:</source>
        <translation>X :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="658"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="654"/>
        <source>Y-Pos:</source>
        <translation>Y :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="700"/>
        <source>Action</source>
        <translation>Action</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="731"/>
        <source>Field is formatted as:</source>
        <translation>Le champ est formaté comme :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Plain</source>
        <translation>Texte</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Number</source>
        <translation>Nombre</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Percentage</source>
        <translation>Pourcentage</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Date</source>
        <translation>Date</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Time</source>
        <translation>Heure</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Custom</source>
        <translation>Sur mesure</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="752"/>
        <source>Number Format</source>
        <translation>Format du nombre</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="820"/>
        <source>Decimals:</source>
        <translation>Décimales :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="775"/>
        <source>Use Currency Symbol</source>
        <translation>Unité monétaire</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="784"/>
        <source>Prepend Currency Symbol</source>
        <translation>Symbole monétaire</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="831"/>
        <source>Formatting</source>
        <translation>Mise en page</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="811"/>
        <source>Percent Format</source>
        <translation>Format du pourcentage</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="854"/>
        <source>Date Format</source>
        <translation>Format de la date</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="880"/>
        <source>Time Format</source>
        <translation>Format de l&apos;heure</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="902"/>
        <source>Custom Scripts</source>
        <translation>Scripts sur mesure</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="914"/>
        <source>Format:</source>
        <translation>Format :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="940"/>
        <source>Keystroke:</source>
        <translation>Frappe :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="964"/>
        <source>Format</source>
        <translation>Format</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="980"/>
        <source>Value is not validated</source>
        <translation>La valeur n&apos;est pas validée</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="989"/>
        <source>Value must be greater than or equal to:</source>
        <translation>La valeur doit être supérieure ou égale à :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="993"/>
        <source>and less or equal to:</source>
        <translation>et inférieure ou égale à :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1004"/>
        <source>Custom validate script:</source>
        <translation>Script de validation sur mesure :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1025"/>
        <source>Validate</source>
        <translation>Valider</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1042"/>
        <source>Value is not calculated</source>
        <translation>La valeur n&apos;est pas calculée</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1051"/>
        <source>Value is the</source>
        <translation>La valeur est</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>sum</source>
        <translation>la somme</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>product</source>
        <translation>le produit</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>average</source>
        <translation>la moyenne</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>minimum</source>
        <translation>le minimum</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1057"/>
        <source>maximum</source>
        <translation>le maximum</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1064"/>
        <source>of the following fields:</source>
        <translation>des champs suivants :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1074"/>
        <source>Pick...</source>
        <translation>Choisir...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1079"/>
        <source>Custom calculation script:</source>
        <translation>Script de calcul sur mesure :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1099"/>
        <source>Calculate</source>
        <translation>Calculer</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1118"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1122"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1174"/>
        <source>Flag is ignored for PDF 1.3</source>
        <translation>Le drapeau est ignoré pour le format PDF 1.3</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1175"/>
        <source>Enter a comma separated list of fields here</source>
        <translation>Saisissez ici une liste de champs séparés par des virgules</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1176"/>
        <source>You need at least the Icon for Normal to use Icons for Buttons</source>
        <translation>Vous avez au moins besoin de l&apos;icône « Normal » pour pouvoir utiliser les icônes comme boutons</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2244"/>
        <source>Open</source>
        <translation>Ouvrir</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1453"/>
        <source>Example:</source>
        <translation>Exemple :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2079"/>
        <source>Selection Change</source>
        <translation>Sélection modifiée</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2087"/>
        <source>None</source>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2244"/>
        <source>PDF Files (*.pdf);;All Files (*)</source>
        <translation>Fichiers PDF (*.pdf);;Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="134"/>
        <source>Tooltip:</source>
        <translation>Bulle d&apos;aide :</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="242"/>
        <source>Do Not Export Value</source>
        <translation>Ne pas exporter la valeur</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1342"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
        <translation>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1287"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="625"/>
        <source>Export absolute Filename</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Annota</name>
    <message>
        <location filename="../../scribus/annota.cpp" line="47"/>
        <source>Annotation Properties</source>
        <translation>Propriétés de l&apos;annotation</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="77"/>
        <source>Text</source>
        <translation>Texte</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="78"/>
        <source>Link</source>
        <translation>Lien</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="79"/>
        <source>External Link</source>
        <translation>Lien externe</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="80"/>
        <source>External Web-Link</source>
        <translation>URL</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="82"/>
        <source>&amp;Type:</source>
        <translation>&amp;Type :</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="118"/>
        <source>Destination</source>
        <translation>Destination</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="129"/>
        <source>C&amp;hange...</source>
        <translation>&amp;Parcourir...</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="147"/>
        <source>&amp;Page:</source>
        <translation>&amp;Page :</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="177"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="171"/>
        <source>&amp;X-Pos</source>
        <translation>&amp;X</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="179"/>
        <source>&amp;Y-Pos:</source>
        <translation>&amp;Y :</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="409"/>
        <source>Open</source>
        <translation>Ouvrir</translation>
    </message>
    <message>
        <location filename="../annota.cpp" line="351"/>
        <source>PDF-Documents (*.pdf);;All Files (*)</source>
        <translation type="obsolete">Documents PDF (*.pdf);;Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="409"/>
        <source>%1;;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="131"/>
        <source>Export absolute Filename</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ApplyMasterPageDialog</name>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="267"/>
        <source>Apply Master Page</source>
        <translation>Appliquer un gabarit</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="268"/>
        <source>&amp;Master Page:</source>
        <translation>&amp;Gabarit :</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
        <source>Apply To</source>
        <translation>Appliquer à</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
        <source>Current &amp;page</source>
        <translation>Page &amp;courante</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
        <source>Alt+P</source>
        <translation>Alt+P</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
        <source>&amp;Even pages</source>
        <translation>Pages &amp;paires</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
        <source>Alt+E</source>
        <translation>Alt+E</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
        <source>O&amp;dd pages</source>
        <translation>Pages &amp;impaires</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
        <source>&amp;All pages</source>
        <translation>&amp;Toutes les pages</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
        <source>&amp;Within range</source>
        <translation>Dans la &amp;plage</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
        <source>Alt+W</source>
        <translation>Alt+W</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
        <source>Apply the selected master page to even, odd or all pages within the following range</source>
        <translation>Applique le gabarit sélectionné aux pages paires, impaires ou à toutes les pages de la plage suivante</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
        <source>to</source>
        <translation>à</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
        <source>Alt+O</source>
        <translation>Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
        <source>Possible Hyphenation</source>
        <translation type="unfinished">Césure possible</translation>
    </message>
</context>
<context>
    <name>ArrowChooser</name>
    <message>
        <location filename="../arrowchooser.cpp" line="33"/>
        <source>None</source>
        <translation type="obsolete">Aucune</translation>
    </message>
</context>
<context>
    <name>AspellPlugin</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="64"/>
        <source>Spell-checking support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
        <source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="70"/>
        <source>0.1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="32"/>
        <source>Spell Checker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="95"/>
        <source>Aspell Plugin Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AspellPluginBase</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
        <source>Spell Check</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
        <source>Replacement:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
        <source>&amp;Add Word</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
        <source>&amp;Change</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="351"/>
        <source>&amp;Exit</source>
        <translation type="obsolete">&amp;Quitter</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
        <source>Not in Dictionary:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
        <source>Word that was not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
        <source>Replacement text for the current word that was not found in the dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
        <source>Active Dictionary: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
        <source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
        <source>Ignore the current text not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
        <source>&amp;Ignore</source>
        <translation type="unfinished">&amp;Ignorer</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
        <source>Ignore all occurrences of the current text not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
        <source>I&amp;gnore All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
        <source>Add the current word to the your personal spelling dictionary for future use</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
        <source>Change the current word that was not found to that shown in the replacement entry field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
        <source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
        <source>Change A&amp;ll</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
        <source>Close</source>
        <translation type="unfinished">Fermer</translation>
    </message>
</context>
<context>
    <name>AspellPluginImpl</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="32"/>
        <source>Loaded </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="32"/>
        <source>default </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="32"/>
        <source> aspell dictionary.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="79"/>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="86"/>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="337"/>
        <source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="338"/>
        <source> by adding it to the session list.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="360"/>
        <source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="218"/>
        <source>Spelling check complete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="405"/>
        <source>Spell Checker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="57"/>
        <source>No available Aspell dictionaries found. Install some, please.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="407"/>
        <source>Do you want start from the beginning of the selection with new language selected?</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AutoformButtonGroup</name>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1280"/>
        <source>Arrows</source>
        <translation type="unfinished">Flèches</translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
        <source>Flow Chart</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
        <source>Jigsaw</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
        <source>Specials</source>
        <translation type="unfinished">Caractères spéciaux</translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
        <source>Default Shapes</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Barcode</name>
    <message>
        <location filename="../plugins/barcodegenerator/barcode.cpp" line="22"/>
        <source>&amp;Barcode Generator...</source>
        <translation type="obsolete">C&amp;réateur de codes à barres...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
        <source>Scribus frontend for Pure Postscript Barcode Writer</source>
        <translation type="obsolete">Interface Scribus pour la création de codes à barres en pur PostScript</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
        <source>&amp;Barcode...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
        <source>Scribus frontend for Pure PostScript Barcode Writer</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGenerator</name>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
        <source>12 or 13 digits</source>
        <translation>12 ou 13 chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
        <source>8 digits</source>
        <translation>8 chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
        <source>11 or 12 digits</source>
        <translation>11 ou 12 chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
        <source>7 or 8 digits</source>
        <translation>7 ou 8 chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
        <source>5 digits</source>
        <translation>5 chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
        <source>2 digits</source>
        <translation>2 chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
        <source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
        <translation>Nombre variable de caractères, chiffres et des symboles -.·*$/+%.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
        <source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
        <translation>Chaîne composée d&apos;un nombre variable de caractères ASCII et de symboles spéciaux, débutant par le caractère approprié.  Le code UCC/EAN 128 présente en première position après le caractère de début, un caractère non signifiant en terme de données : le caractère fonction 1 (FNC1).</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
        <source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
        <translation>Nombre variable de chiffres et des symboles -$:/.+ABCD.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
        <source>Variable number of digits</source>
        <translation>Nombre variable de chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
        <source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
        <translation>Nombre variable de chiffres. Un symbole ITF 14 contient 14 caractères sans somme de contrôle.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
        <source>Variable number of digits and capital letters</source>
        <translation>Nombre variables de chiffres et de lettres majuscules</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
        <source>Variable number of hexadecimal characters</source>
        <translation>Nombre variable de caractères héxadécimaux</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
        <source>Error opening file: %1</source>
        <translation>Erreur à l&apos;ouverture du fichier %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
        <source>Barcode incomplete</source>
        <translation>Codes à barres incomplet</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
        <source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
        <translation>12 ou 13 chiffres ou tirets. L&apos;ancien format ISBN 10 accepte 9 ou 10 chiffres ou tirets, mais ce standard est obsolète depuis le 1er janvier 2007. (Note : pour convertir de l&apos;ancien ISBN 10 vers le format ISBN-13, ajouter le préfixe 978- aux 9 premiers chiffres/tirets : 1-56592-479-7 devient 978-1-56592-479. Le dernier chiffre de contrôle sera calculé automatiquement.)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
        <source>Select Type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="145"/>
        <source>Select Barcode Type</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGeneratorBase</name>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
        <source>Barcode Creator</source>
        <translation type="obsolete">Créateur de codes à barres</translation>
    </message>
    <message>
        <location filename="../plugins/barcodegenerator/barcodegenerator.ui" line="193"/>
        <source>Barcode</source>
        <translation type="obsolete">Code à barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="152"/>
        <source>&amp;Type:</source>
        <translation>&amp;Type :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="132"/>
        <source>Co&amp;de:</source>
        <translation>C&amp;ode :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="145"/>
        <source>Select one of the available barcode type here</source>
        <translation>Choisir un type de code à barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="125"/>
        <source>The numeric representation of the code itself. See the help message below</source>
        <translation>Représentation numérique du code lui-même. Voir Aide ci-dessous</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="115"/>
        <source>Reset the barcode samples</source>
        <translation>Réglages initiaux des échantillons de codes à barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
        <source>&amp;Include text in barcode</source>
        <translation>&amp;Ajouter un texte au code à barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="93"/>
        <source>Alt+I</source>
        <translation>Alt+I</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="87"/>
        <source>If checked, there will be numbers in the barcode too</source>
        <translation>Si cochée, le code à barres contiendra aussi des chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="77"/>
        <source>&amp;Guard whitespace</source>
        <translation>&amp;Conserver le blanc</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="80"/>
        <source>Alt+G</source>
        <translation>Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="74"/>
        <source>Draw arrows to be sure of space next the code</source>
        <translation>Détermine la réserve autour du code</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="64"/>
        <source>I&amp;nclude checksum</source>
        <translation>I&amp;nclure la somme de contrôle</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="67"/>
        <source>Alt+N</source>
        <translation>Alt+N</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="61"/>
        <source>Generate and include a checksum in barcode</source>
        <translation>Calculer et inclure une somme de contrôle dans le code à barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="51"/>
        <source>Incl&amp;ude checksum digit</source>
        <translation>Incl&amp;ure un nombre de contrôle</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="54"/>
        <source>Alt+U</source>
        <translation>Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="48"/>
        <source>Include the checksum digit in the barcode text</source>
        <translation>Inclure le nombre de contrôle dans le texte du code à barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="168"/>
        <source>Colors</source>
        <translation>Couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="208"/>
        <source>&amp;Background</source>
        <translation>Couleur de &amp;fond</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="211"/>
        <source>Alt+B</source>
        <translation>Alt+B</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="205"/>
        <source>Background color - under the code lines</source>
        <translation>Couleur de fond, sous les barres du code</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="240"/>
        <source>&amp;Lines</source>
        <translation>&amp;Barres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="243"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="237"/>
        <source>Color of the lines in barcode</source>
        <translation>Couleur des barres du code</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="272"/>
        <source>&amp;Text</source>
        <translation>&amp;Texte</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="275"/>
        <source>Alt+T</source>
        <translation>Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="269"/>
        <source>Color of the text and numbers</source>
        <translation>Couleur du texte et des chiffres</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="304"/>
        <source>Hints and help is shown here</source>
        <translation>Explications et assistance</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="314"/>
        <source>Preview of the result. 72dpi sample.</source>
        <translation>Prévisualisation du code à 72 ppp</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
        <source>Insert Barcode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
        <source>Format</source>
        <translation type="unfinished">Format</translation>
    </message>
</context>
<context>
    <name>Biblio</name>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
        <source>Choose a Scrapbook Directory</source>
        <translation>Sélectionnez un dossier pour l&apos;Album</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
        <source>Choose a Directory</source>
        <translation>Sélectionnez un dossier</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
        <source>Rename</source>
        <translation>Renommer</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="839"/>
        <source>Delete</source>
        <translation>Supprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
        <source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
        <translation>Le nom &quot;%1&quot; existe déjà.
Choisissez-en un autre.</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
        <source>Object</source>
        <translation>Objet</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
        <source>&amp;Name:</source>
        <translation>&amp;Nom :</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
        <source>New Entry</source>
        <translation>Nouvelle entrée</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
        <source>Scrapbook</source>
        <translation>Album</translation>
    </message>
    <message>
        <location filename="../scrapbookpalette.cpp" line="747"/>
        <source>Scrapbook (*.scs)</source>
        <translation type="obsolete">Album (*.scs)</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
        <source>Choose a scrapbook file to import</source>
        <translation>Choisir un fichier d&apos;album à importer</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
        <source>Create a new scrapbook page</source>
        <translation>Créer une nouvelle page d&apos;album</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
        <source>Load an existing scrapbook</source>
        <translation>Charger un album existant</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
        <source>Save the selected scrapbook</source>
        <translation>Enregistrer l&apos;album sélectionné</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
        <source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
        <translation>Importer un fichier d&apos;album de Scribus &lt;= 1.3.2</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
        <source>Close the selected scrapbook</source>
        <translation>Fermer l&apos;album sélectionné</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
        <source>Copy To:</source>
        <translation>Copier vers :</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
        <source>Move To:</source>
        <translation>Déplacer vers :</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
        <source>Main</source>
        <translation>Principal</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
        <source>Copied Items</source>
        <translation>Objets copiés</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
        <source>New Name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
        <source>Scrapbook (*.scs *.SCS)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="833"/>
        <source>Paste to Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="889"/>
        <source>Save as...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="892"/>
        <source>Close</source>
        <translation type="unfinished">Fermer</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="895"/>
        <source>Delete Contents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
        <source>Do you really want to delete all entries?</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BookMView</name>
    <message>
        <location filename="../bookmwin.cpp" line="219"/>
        <source>Move Bookmark</source>
        <translation type="obsolete">Déplacer signet</translation>
    </message>
    <message>
        <location filename="../bookmwin.cpp" line="220"/>
        <source>Insert Bookmark</source>
        <translation type="obsolete">Insérer signet</translation>
    </message>
    <message>
        <location filename="../bookmwin.cpp" line="221"/>
        <source>Cancel</source>
        <translation type="obsolete">Annuler</translation>
    </message>
    <message>
        <location filename="../bookmwin.cpp" line="554"/>
        <source>Bookmarks</source>
        <translation type="obsolete">Signets</translation>
    </message>
</context>
<context>
    <name>BookPalette</name>
    <message>
        <location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
        <source>Bookmarks</source>
        <translation>Signets</translation>
    </message>
</context>
<context>
    <name>ButtonIcon</name>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="29"/>
        <source>Icon Placement</source>
        <translation>Position des icônes</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="38"/>
        <source>Layout:</source>
        <translation>Disposition :</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Caption only</source>
        <translation>Légende seule</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Icon only</source>
        <translation>Icône seul</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Caption below Icon</source>
        <translation>Légende en dessous de l&apos;icône</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Caption above Icon</source>
        <translation>Légende au-dessus de l&apos;icône</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="42"/>
        <source>Caption right to Icon</source>
        <translation>Légende à droite de l&apos;icône</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="42"/>
        <source>Caption left to Icon</source>
        <translation>Légende à gauche de l&apos;icône</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="42"/>
        <source>Caption overlays Icon</source>
        <translation>Légende masquant l&apos;icône</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="50"/>
        <source>Scale:</source>
        <translation>Mise à l&apos;échelle :</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="55"/>
        <source>Always</source>
        <translation>Toujours</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="55"/>
        <source>When Icon is too small</source>
        <translation>Quand l&apos;icône est trop petit</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="56"/>
        <source>When Icon is too big</source>
        <translation>Quand l&apos;icône est trop grand</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="56"/>
        <source>Never</source>
        <translation>Jamais</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="63"/>
        <source>Scale How:</source>
        <translation>Type :</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="66"/>
        <source>Proportional</source>
        <translation>Proportionnel</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="67"/>
        <source>Non Proportional</source>
        <translation>Indépendant</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="90"/>
        <source>Icon</source>
        <translation>Icône</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="117"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="121"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="124"/>
        <source>Reset</source>
        <translation>Remise à zéro</translation>
    </message>
</context>
<context>
    <name>CMSPrefs</name>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="31"/>
        <source>&amp;Activate Color Management</source>
        <translation type="obsolete">&amp;Activer la gestion des couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="34"/>
        <source>System Profiles</source>
        <translation type="obsolete">Profils</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="43"/>
        <source>&amp;RGB Pictures:</source>
        <translation type="obsolete">Images &amp;RVB :</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="51"/>
        <source>&amp;CMYK Pictures:</source>
        <translation type="obsolete">Images &amp;CMJN :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="75"/>
        <source>&amp;Monitor:</source>
        <translation type="obsolete">Écra&amp;n :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="83"/>
        <source>P&amp;rinter:</source>
        <translation type="obsolete">Imp&amp;rimante :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="89"/>
        <source>Rendering Intents</source>
        <translation type="obsolete">Rendus</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="69"/>
        <source>Perceptual</source>
        <translation>Perceptible</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="69"/>
        <source>Relative Colorimetric</source>
        <translation>Colorimétrie relative</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="70"/>
        <source>Saturation</source>
        <translation>Saturation</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="70"/>
        <source>Absolute Colorimetric</source>
        <translation>Colorimétrie absolue</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="113"/>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation type="obsolete">Sim&amp;ulation du rendu de l&apos;imprimante à l&apos;écran</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="130"/>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation type="obsolete">Identifier les couleurs hors &amp;gamme</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="134"/>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation type="obsolete">Équili&amp;brer le point noir</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="139"/>
        <source>Default color profile for imported CMYK images</source>
        <translation type="obsolete">Profil de couleur par défaut pour les images CMJN importées</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="140"/>
        <source>Default color profile for imported RGB images</source>
        <translation type="obsolete">Profil de couleur par défaut pour les images RVB importées</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="143"/>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation type="obsolete">Profil de couleur que vous avez créé ou reçu du constructeur.
Ce profil doit être propre à votre écran et non pas générique (i.e sRVB).</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="144"/>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation type="obsolete">Profil de couleur du constructeur pour votre imprimante.
Ce profil doit être propre à votre imprimante et non pas générique (i.e. sRVB).</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="147"/>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation type="obsolete">Active « l&apos;épreuvage à l&apos;écran », basé sur le profil imprimante sélectionné.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="149"/>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation type="obsolete">Méthode permettant de voir à l&apos;écran les couleurs qui pourraient ne pas s&apos;imprimer
correctement. Elle nécessite des profils précis et ne sert que d&apos;avertissement.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="150"/>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation type="obsolete">Sert à améliorer le contraste des photos. Il est recommandé de l&apos;utiliser si
vous avez des photos dans votre composition.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="59"/>
        <source>&amp;RGB Solid Colors:</source>
        <translation type="obsolete">Couleurs &amp;RVB :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="67"/>
        <source>&amp;CMYK Solid Colors:</source>
        <translation type="obsolete">Couleurs &amp;CMJN :</translation>
    </message>
    <message>
        <location filename="../cmsprefs.cpp" line="98"/>
        <source>Pictures:</source>
        <translation type="obsolete">Images :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="106"/>
        <source>Sol&amp;id Colors:</source>
        <translation type="obsolete">Couleurs un&amp;ies :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="121"/>
        <source>Convert all colors to printer space</source>
        <translation type="obsolete">Convertir toutes les couleurs vers l&apos;espace de couleurs de l&apos;imprimante</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="141"/>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation type="obsolete">Profil de couleurs par défaut pour les couleurs RVB sur la page</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="142"/>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation type="obsolete">Profil de couleurs par défaut pour les couleurs CMJN sur la page</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="145"/>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Méthode de rendu par défaut pour les couleurs unies. A moins de savoir pourquoi le changer, laisser sur Colorimétrie relative ou Perceptible.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="146"/>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="obsolete">Méthode de rendu par défaut pour les images. A moins de savoir pourquoi le changer, laisser sur Colorimétrie relative ou Perceptible.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="148"/>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation type="obsolete">Simule un environnement colorimétrique : toutes les couleurs, rvb ou cmjn sont convertis vers l&apos;space colorimétrique de l&apos;imprimante.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="98"/>
        <source>Images:</source>
        <translation type="obsolete">Images :</translation>
    </message>
</context>
<context>
    <name>CMSPrefsBase</name>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="19"/>
        <source>Form</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="40"/>
        <source>&amp;Activate Color Management</source>
        <translation type="unfinished">&amp;Activer la gestion des couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="50"/>
        <source>System Profiles</source>
        <translation type="unfinished">Profils</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="74"/>
        <source>&amp;RGB Images:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="90"/>
        <source>Default color profile for imported RGB images</source>
        <translation type="unfinished">Profil de couleur par défaut pour les images RVB importées</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="97"/>
        <source>&amp;CMYK Images:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="113"/>
        <source>Default color profile for imported CMYK images</source>
        <translation type="unfinished">Profil de couleur par défaut pour les images CMJN importées</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="120"/>
        <source>&amp;RGB Solid Colors:</source>
        <translation type="unfinished">Couleurs &amp;RVB :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="136"/>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation type="unfinished">Profil de couleurs par défaut pour les couleurs RVB sur la page</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="143"/>
        <source>&amp;CMYK Solid Colors:</source>
        <translation type="unfinished">Couleurs &amp;CMJN :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="159"/>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation type="unfinished">Profil de couleurs par défaut pour les couleurs CMJN sur la page</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="166"/>
        <source>&amp;Monitor:</source>
        <translation type="unfinished">Écra&amp;n :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="182"/>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation type="unfinished">Profil de couleur que vous avez créé ou reçu du constructeur.
Ce profil doit être propre à votre écran et non pas générique (i.e sRVB).</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="190"/>
        <source>P&amp;rinter:</source>
        <translation type="unfinished">Imp&amp;rimante :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="206"/>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation type="unfinished">Profil de couleur du constructeur pour votre imprimante.
Ce profil doit être propre à votre imprimante et non pas générique (i.e. sRVB).</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="220"/>
        <source>Rendering Intents</source>
        <translation type="unfinished">Rendus</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="244"/>
        <source>Images:</source>
        <translation type="unfinished">Images :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="260"/>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="unfinished">Méthode de rendu par défaut pour les images. A moins de savoir pourquoi le changer, laisser sur Colorimétrie relative ou Perceptible.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="268"/>
        <source>Sol&amp;id Colors:</source>
        <translation type="unfinished">Couleurs un&amp;ies :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="284"/>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation type="unfinished">Méthode de rendu par défaut pour les couleurs unies. A moins de savoir pourquoi le changer, laisser sur Colorimétrie relative ou Perceptible.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="298"/>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation type="unfinished">Active « l&apos;épreuvage à l&apos;écran », basé sur le profil imprimante sélectionné.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="302"/>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation type="unfinished">Sim&amp;ulation du rendu de l&apos;imprimante à l&apos;écran</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="329"/>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation type="unfinished">Simule un environnement colorimétrique : toutes les couleurs, rvb ou cmjn sont convertis vers l&apos;space colorimétrique de l&apos;imprimante.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="333"/>
        <source>Convert all colors to printer space</source>
        <translation type="unfinished">Convertir toutes les couleurs vers l&apos;espace de couleurs de l&apos;imprimante</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="340"/>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation type="unfinished">Méthode permettant de voir à l&apos;écran les couleurs qui pourraient ne pas s&apos;imprimer
correctement. Elle nécessite des profils précis et ne sert que d&apos;avertissement.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="344"/>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation type="unfinished">Identifier les couleurs hors &amp;gamme</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="357"/>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation type="unfinished">Sert à améliorer le contraste des photos. Il est recommandé de l&apos;utiliser si
vous avez des photos dans votre composition.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="361"/>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation type="unfinished">Équili&amp;brer le point noir</translation>
    </message>
</context>
<context>
    <name>CMYKChoose</name>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="92"/>
        <source>Edit Color</source>
        <translation>Édition des couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="101"/>
        <source>&amp;Name:</source>
        <translation>&amp;Nom :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="111"/>
        <source>Color &amp;Model</source>
        <translation>&amp;Modèle colorimétrique</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="906"/>
        <source>CMYK</source>
        <translation>CMJN</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="911"/>
        <source>RGB</source>
        <translation>RVB</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="764"/>
        <source>Web Safe RGB</source>
        <translation>RVB pour le Web</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="125"/>
        <source>Is Spot Color</source>
        <translation>Ton direct</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="128"/>
        <source>Is Registration Color</source>
        <translation type="obsolete">Couleur de repérage</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="141"/>
        <source>New</source>
        <translation>Nouvelle</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="158"/>
        <source>Old</source>
        <translation>Ancienne</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="195"/>
        <source>HSV-Colormap</source>
        <translation type="obsolete">Modèle de couleur TSL</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="705"/>
        <source>C:</source>
        <translation>C :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="704"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="706"/>
        <source>M:</source>
        <translation>M :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="707"/>
        <source>Y:</source>
        <translation>J :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="347"/>
        <source>K:</source>
        <translation>N :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="444"/>
        <source>Dynamic Color Bars</source>
        <translation>Barres de couleur dynamique</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="442"/>
        <source>Static Color Bars</source>
        <translation>Barres de couleur statique</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="749"/>
        <source>R:</source>
        <translation>R :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="750"/>
        <source>G:</source>
        <translation>V :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="751"/>
        <source>B:</source>
        <translation>B :</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="1002"/>
        <source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
        <translation>Vous ne pouvez pas créer une couleur nommée &quot;%1&quot;.
Ce nom est réservé aux couleurs transparentes</translation>
    </message>
    <message>
        <location filename="../cmykfw.cpp" line="385"/>
        <source>Choosing this will enable printing this on all plates. Registration colors are used for printer marks such as crop marks, registration marks and the like. These are not typically used in the layout itself.</source>
        <translation type="obsolete">Ceci va activer l&apos;impression sur toutes les plaques. Les couleurs de repérage sont utilisées pour les repères d&apos;impression, traits de coupes ou marques de repérage et ne font en général pas partie de la disposition du document.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="obsolete">Si la gestion des couleurs est activée, un triangle d&apos;avertissement apparaît à côté de la couleur si celle-ci se trouve hors de la gamme du profil d&apos;impression utilisé. Cela signifie que le couleur imprimée sera légèrement différente de celle à l&apos;écran. Pour plus de détails consulter l&apos;aide en ligne, section Color Management.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="1011"/>
        <source>The name of the color already exists,
please choose another one.</source>
        <translation>Le nom de cette couleur existe déjà, 
choisissez-en un autre.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="390"/>
        <source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
        <translation>Fait de  cette couleur un ton direct qui donnera lieu à sa propre séparation ou plaque. On utilise cette méthode pour un logo ou toute couleur très spécifique ne pouvant être reproduite avec les encres CMJN. Les encres métalliques ou fluorescentes sont de bons exemples de couleurs ne pouvant être réalisées avec des encres CMJN.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="785"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="995"/>
        <source>You cannot create a color without a name
Please give it a name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="196"/>
        <source>HSV Color Map</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CStyleP</name>
    <message>
        <location filename="../smcstylew.ui" line="49"/>
        <source>Based On:</source>
        <translation type="obsolete">Basé sur :</translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="89"/>
        <source>Basic Formatting</source>
        <translation type="obsolete">Formatage basique</translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="99"/>
        <source>Advanced Formatting</source>
        <translation type="obsolete">Formatage avancé</translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="109"/>
        <source>Colors</source>
        <translation type="obsolete">Couleurs</translation>
    </message>
</context>
<context>
    <name>CStylePBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Form1</source>
        <translation type="obsolete">Formulaire1</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Based On:</source>
        <translation type="obsolete">Basé sur :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Basic Formatting</source>
        <translation type="obsolete">Formatage basique</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Advanced Formatting</source>
        <translation type="obsolete">Formatage avancé</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Colors</source>
        <translation type="obsolete">Couleurs</translation>
    </message>
</context>
<context>
    <name>CWDialog</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
        <source>Merging colors</source>
        <translation>Fusion des couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
        <source>Error: </source>
        <translation>Erreur :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
        <source>Color %1 exists already!</source>
        <translation>La couleur %1 existe déjà !</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
        <source>Color %1 appended.</source>
        <translation>Couleur %1 ajoutée.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
        <source>Now opening the color manager.</source>
        <translation>Ouverture du gestionnaire de couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
        <source>Color Merging</source>
        <translation>Fusion de couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation>Impossible de trouver la couleur demandée. Vous avez certainement choisi noir, gris ou blanc. Il est impossible de traiter cette couleur.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
        <source>Color Wheel</source>
        <translation type="unfinished">Cercle chromatique</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="47"/>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation type="unfinished">Cliquer sur la roue pour obtenir la couleur de base. Le modèle de couleur dépend de l&apos;onglet choisi.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="54"/>
        <source>Result Colors</source>
        <translation type="unfinished">Couleurs résultantes</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="311"/>
        <source>CMYK</source>
        <translation type="unfinished">CMJN</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="532"/>
        <source>RGB</source>
        <translation type="unfinished">RVB</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="718"/>
        <source>HSV</source>
        <translation type="unfinished">Modèle de couleurs HSV</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="108"/>
        <source>Colors of your chosen color scheme.</source>
        <translation type="unfinished">Couleurs de votre schéma de couleurs.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="118"/>
        <source>Color Scheme Method</source>
        <translation type="unfinished">Type de modèle de couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="144"/>
        <source>Angle:</source>
        <translation type="unfinished">Angle :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="154"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="unfinished">Différence entre la valeur sélectionnée et celle calculée. Voir la documentation pour plus d&apos;informations</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="169"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="unfinished">Choisir une méthode de création pour le schéma de couleur. Voir la documentation pour plus de détails</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="203"/>
        <source>Merge created colors into the document colors</source>
        <translation type="unfinished">Fusionner les couleurs créées avec celles du document</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="206"/>
        <source>&amp;Merge</source>
        <translation type="unfinished">&amp;Fusionner</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="209"/>
        <source>Alt+M</source>
        <translation type="unfinished">Alt+M</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="216"/>
        <source>Replace created colors in the document colors</source>
        <translation type="unfinished">Remplacer les couleurs créées dans le document</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="219"/>
        <source>&amp;Replace</source>
        <translation type="unfinished">Substitue&amp;r</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="222"/>
        <source>Alt+R</source>
        <translation type="unfinished">Alt+R</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="229"/>
        <source>Leave colors untouched</source>
        <translation type="unfinished">Laisser les couleurs inchangées</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="232"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="235"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="244"/>
        <source>Preview:</source>
        <translation type="unfinished">Aperçu :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="268"/>
        <source>Sample color scheme.</source>
        <translation type="unfinished">Example de schéma de couleurs.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="287"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="unfinished">Simulez des anomalies de la vision courantes. Choississez parmi les anomalies suivantes.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="294"/>
        <source>Vision Defect Type:</source>
        <translation type="unfinished">Type de déficience visuelle :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="331"/>
        <source>C:</source>
        <translation type="unfinished">C :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="431"/>
        <source> %</source>
        <translation type="unfinished"> %</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="361"/>
        <source>M:</source>
        <translation type="unfinished">M :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="391"/>
        <source>Y:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="421"/>
        <source>K:</source>
        <translation type="unfinished">N :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="827"/>
        <source>RGB:</source>
        <translation type="unfinished">RVB :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="674"/>
        <source>HSV:</source>
        <translation type="unfinished">HSV :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="560"/>
        <source>R:</source>
        <translation type="unfinished">R :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="587"/>
        <source>G:</source>
        <translation type="unfinished">V :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="614"/>
        <source>B:</source>
        <translation type="unfinished">B :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="863"/>
        <source>CMYK:</source>
        <translation type="unfinished">CMJN :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="746"/>
        <source>H:</source>
        <translation type="unfinished">Teinte :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="773"/>
        <source>S:</source>
        <translation type="unfinished">Saturation :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="800"/>
        <source>V:</source>
        <translation type="unfinished">Luminosité :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="907"/>
        <source>Document</source>
        <translation type="unfinished">Document</translation>
    </message>
</context>
<context>
    <name>CWDialogBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Color Wheel</source>
        <translation type="obsolete">Cercle chromatique</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation type="obsolete">Cliquer sur la roue pour obtenir la couleur de base. Le modèle de couleur dépend de l&apos;onglet choisi.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>CMYK</source>
        <translation type="obsolete">CMJN</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>C:</source>
        <translation type="obsolete">C :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>M:</source>
        <translation type="obsolete">M :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Y:</source>
        <translation type="obsolete">J :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>K:</source>
        <translation type="obsolete">N :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>RGB:</source>
        <translation type="obsolete">RVB :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>RGB</source>
        <translation type="obsolete">RVB</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>R:</source>
        <translation type="obsolete">R :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>G:</source>
        <translation type="obsolete">V :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>B:</source>
        <translation type="obsolete">B :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>CMYK:</source>
        <translation type="obsolete">CMJN :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Document</source>
        <translation type="obsolete">Document</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="obsolete">Choisir une méthode de création pour le schéma de couleur. Voir la documentation pour plus de détails</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Angle:</source>
        <translation type="obsolete">Angle :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="obsolete">Différence entre la valeur sélectionnée et celle calculée. Voir la documentation pour plus d&apos;informations</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Preview:</source>
        <translation type="obsolete">Aperçu :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Vision Defect Type:</source>
        <translation type="obsolete">Type de déficience visuelle :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Sample color scheme.</source>
        <translation type="obsolete">Example de schéma de couleurs.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Colors of your chosen color scheme.</source>
        <translation type="obsolete">Couleurs de votre schéma de couleurs.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Merge</source>
        <translation type="obsolete">&amp;Fusionner</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+M</source>
        <translation type="obsolete">Alt+M</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Merge created colors into the document colors</source>
        <translation type="obsolete">Fusionner les couleurs créées avec celles du document</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Replace</source>
        <translation type="obsolete">Substitue&amp;r</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+R</source>
        <translation type="obsolete">Alt+R</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Replace created colors in the document colors</source>
        <translation type="obsolete">Remplacer les couleurs créées dans le document</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Leave colors untouched</source>
        <translation type="obsolete">Laisser les couleurs inchangées</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="obsolete">Simulez des anomalies de la vision courantes. Choississez parmi les anomalies suivantes.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Color Scheme Method</source>
        <translation type="obsolete">Type de modèle de couleurs</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>HSV:</source>
        <translation type="obsolete">HSV :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>HSV</source>
        <translation type="obsolete">Modèle de couleurs HSV</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>H:</source>
        <translation type="obsolete">Teinte :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>S:</source>
        <translation type="obsolete">Saturation :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>V:</source>
        <translation type="obsolete">Luminosité :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Result Colors</source>
        <translation type="obsolete">Couleurs résultantes</translation>
    </message>
</context>
<context>
    <name>Canvas</name>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2252"/>
        <source>X: %1
Y: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2243"/>
        <source>X: %1</source>
        <translation type="unfinished">X : %1 %2 {1?}</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2245"/>
        <source>Y: %1</source>
        <translation type="unfinished">Y : %1 %2 {1?}</translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2260"/>
        <source>Length: %1
Angle: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/canvas.cpp" line="2262"/>
        <source>Width: %1
Height: %2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CanvasMode_Normal</name>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1822"/>
        <source>All Supported Formats</source>
        <translation type="unfinished">Tous les formats pris en charge</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_normal.cpp" line="1852"/>
        <source>Open</source>
        <translation type="unfinished">Ouvrir</translation>
    </message>
</context>
<context>
    <name>CharSelect</name>
    <message>
        <location filename="../../scribus/charselect.ui" line="100"/>
        <source>Font:</source>
        <translation type="obsolete">Police :</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="123"/>
        <source>Character Class:</source>
        <translation type="obsolete">Classe de caractères :</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="203"/>
        <source>&amp;Insert</source>
        <translation type="obsolete">&amp;Insérer</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="213"/>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="200"/>
        <source>Insert the characters at the cursor in the text</source>
        <translation type="obsolete">Insérer le(s) caractère(s) à la position du curseur dans le texte</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="210"/>
        <source>Delete the current selection(s).</source>
        <translation type="obsolete">Effacer la(les) sélection(s) courante(s).</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="250"/>
        <source>Full Character Set</source>
        <translation type="obsolete">Jeu de caractères complet</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="255"/>
        <source>Basic Latin</source>
        <translation type="obsolete">Latin de base</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="261"/>
        <source>Latin-1 Supplement</source>
        <translation type="obsolete">Latin-1 supplémentaire</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="267"/>
        <source>Latin Extended-A</source>
        <translation type="obsolete">Latin étendu-A</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="273"/>
        <source>Latin Extended-B</source>
        <translation type="obsolete">Latin étendu-B</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="279"/>
        <source>General Punctuation</source>
        <translation type="obsolete">Ponctuation générale</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="285"/>
        <source>Super- and Subscripts</source>
        <translation type="obsolete">Exposants et indices</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="291"/>
        <source>Currency Symbols</source>
        <translation type="obsolete">Symboles des monnaies</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="297"/>
        <source>Letterlike Symbols</source>
        <translation type="obsolete">Symboles alphabétiques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="303"/>
        <source>Number Forms</source>
        <translation type="obsolete">Formes numériques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="309"/>
        <source>Arrows</source>
        <translation type="obsolete">Flèches</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="315"/>
        <source>Mathematical Operators</source>
        <translation type="obsolete">Opérateurs mathématiques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="321"/>
        <source>Box Drawing</source>
        <translation type="obsolete">Tracé de rectangles</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="327"/>
        <source>Block Elements</source>
        <translation type="obsolete">Éléments de blocs</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="333"/>
        <source>Geometric Shapes</source>
        <translation type="obsolete">Formes géométriques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="339"/>
        <source>Miscellaneous Symbols</source>
        <translation type="obsolete">Symboles divers</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="345"/>
        <source>Dingbats</source>
        <translation type="obsolete">Dingbats</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="351"/>
        <source>Small Form Variants</source>
        <translation type="obsolete">Petites variations de formes</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="357"/>
        <source>Ligatures</source>
        <translation type="obsolete">Ligatures</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="363"/>
        <source>Specials</source>
        <translation type="obsolete">Caractères spéciaux</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="369"/>
        <source>Greek</source>
        <translation type="obsolete">Grec</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="375"/>
        <source>Greek Extended</source>
        <translation type="obsolete">Grec étendu</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="381"/>
        <source>Cyrillic</source>
        <translation type="obsolete">Cyrillique</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="387"/>
        <source>Cyrillic Supplement</source>
        <translation type="obsolete">Cyrillique supplémentaire</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="393"/>
        <source>Arabic</source>
        <translation type="obsolete">Arabe</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="399"/>
        <source>Arabic Extended A</source>
        <translation type="obsolete">Arabe étendu A</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="405"/>
        <source>Arabic Extended B</source>
        <translation type="obsolete">Arabe étendu B</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="411"/>
        <source>Hebrew</source>
        <translation type="obsolete">Hébreu</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="164"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="obsolete">Vous pouvez voir une vignette si vous cliquez et maintenez enfoncé le bouton droit de la souris. La touche Inser insère un caractère dans la sélection ci-dessous et la touche Suppr supprime le dernier caractère inséré</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="31"/>
        <source>Scribus Char Palette (*.ucp);;All Files (*)</source>
        <translation>Fichier de palette Scribus (*.ucp);;Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="88"/>
        <source>Enhanced Palette</source>
        <translation type="obsolete">Palette complète</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="19"/>
        <source>Quick Palette</source>
        <translation type="obsolete">Palette rapide</translation>
    </message>
    <message>
        <location filename="../charselect.ui" line="49"/>
        <source>Hide Enhanced</source>
        <translation type="obsolete">Masquer les paramètres avancés</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="226"/>
        <source>Choose a filename to open</source>
        <translation>Choisir un fichier à ouvrir</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="297"/>
        <source>Error</source>
        <translation>Erreur</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="256"/>
        <source>Error reading file %1 - file is corrupted propably.</source>
        <translation>Erreur de lecture du fichier %1 - le fichier est sûrement corrompu.</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="625"/>
        <source>Choose a filename to save under</source>
        <translation type="obsolete">Choisir un nom de fichier pour l&apos;enregistrement</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="298"/>
        <source>Cannot write file %1</source>
        <translation>Impossible d&apos;écrire le fichier %1</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="634"/>
        <source>Clean the Palette?</source>
        <translation type="obsolete">Nettoyer la palette ?</translation>
    </message>
    <message>
        <location filename="../charselect.cpp" line="635"/>
        <source>You will clean all characters from this palette. Are you sure?</source>
        <translation type="obsolete">Ceci va effacer tous les caractères de la palette. Etes-vous sûr ?</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="13"/>
        <source>Character Palette</source>
        <translation>Palette de caractères</translation>
    </message>
    <message>
        <location filename="../charselect.ui" line="56"/>
        <source>&amp;Search</source>
        <translation type="obsolete">Re&amp;chercher</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="306"/>
        <source>Empty the Palette?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="307"/>
        <source>You will remove all characters from this palette. Are you sure?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="24"/>
        <source>Hide/Show Enhanced Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="272"/>
        <source>Save Quick Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CharSelectEnhanced</name>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="205"/>
        <source>Full Character Set</source>
        <translation type="unfinished">Jeu de caractères complet</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="210"/>
        <source>Basic Latin</source>
        <translation type="unfinished">Latin de base</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="216"/>
        <source>Latin-1 Supplement</source>
        <translation type="unfinished">Latin-1 supplémentaire</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="222"/>
        <source>Latin Extended-A</source>
        <translation type="unfinished">Latin étendu-A</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="228"/>
        <source>Latin Extended-B</source>
        <translation type="unfinished">Latin étendu-B</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="234"/>
        <source>General Punctuation</source>
        <translation type="unfinished">Ponctuation générale</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="240"/>
        <source>Super- and Subscripts</source>
        <translation type="unfinished">Exposants et indices</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="246"/>
        <source>Currency Symbols</source>
        <translation type="unfinished">Symboles des monnaies</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="252"/>
        <source>Letterlike Symbols</source>
        <translation type="unfinished">Symboles alphabétiques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="258"/>
        <source>Number Forms</source>
        <translation type="unfinished">Formes numériques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="264"/>
        <source>Arrows</source>
        <translation type="unfinished">Flèches</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="270"/>
        <source>Mathematical Operators</source>
        <translation type="unfinished">Opérateurs mathématiques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="276"/>
        <source>Box Drawing</source>
        <translation type="unfinished">Tracé de rectangles</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="282"/>
        <source>Block Elements</source>
        <translation type="unfinished">Éléments de blocs</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="288"/>
        <source>Geometric Shapes</source>
        <translation type="unfinished">Formes géométriques</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="294"/>
        <source>Miscellaneous Symbols</source>
        <translation type="unfinished">Symboles divers</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="300"/>
        <source>Dingbats</source>
        <translation type="unfinished">Dingbats</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="306"/>
        <source>Small Form Variants</source>
        <translation type="unfinished">Petites variations de formes</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="312"/>
        <source>Ligatures</source>
        <translation type="unfinished">Ligatures</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="318"/>
        <source>Specials</source>
        <translation type="unfinished">Caractères spéciaux</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="324"/>
        <source>Greek</source>
        <translation type="unfinished">Grec</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="330"/>
        <source>Greek Extended</source>
        <translation type="unfinished">Grec étendu</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="336"/>
        <source>Cyrillic</source>
        <translation type="unfinished">Cyrillique</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="342"/>
        <source>Cyrillic Supplement</source>
        <translation type="unfinished">Cyrillique supplémentaire</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="348"/>
        <source>Arabic</source>
        <translation type="unfinished">Arabe</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="354"/>
        <source>Arabic Extended A</source>
        <translation type="unfinished">Arabe étendu A</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="360"/>
        <source>Arabic Extended B</source>
        <translation type="unfinished">Arabe étendu B</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.cpp" line="366"/>
        <source>Hebrew</source>
        <translation type="unfinished">Hébreu</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="13"/>
        <source>Enhanced Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="19"/>
        <source>&amp;Font:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="45"/>
        <source>C&amp;haracter Class:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="77"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="96"/>
        <source>Insert &amp;Code:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="131"/>
        <source>Glyphs to Insert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="171"/>
        <source>Insert the characters at the cursor in the text</source>
        <translation type="unfinished">Insérer le(s) caractère(s) à la position du curseur dans le texte</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="174"/>
        <source>&amp;Insert</source>
        <translation type="unfinished">&amp;Insérer</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="181"/>
        <source>Delete the current selection(s).</source>
        <translation type="unfinished">Effacer la(les) sélection(s) courante(s).</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="184"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">&amp;Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/charselectenhanced.ui" line="106"/>
        <source>Type in a four digit Unicode value directly here</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CharStyleComboBox</name>
    <message>
        <location filename="../../scribus/spalette.cpp" line="118"/>
        <source>No Style</source>
        <translation>Aucun style</translation>
    </message>
</context>
<context>
    <name>CharTable</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Delete</source>
        <translation type="obsolete">Supprimer</translation>
    </message>
</context>
<context>
    <name>CharTableView</name>
    <message>
        <location filename="../../scribus/chartableview.cpp" line="22"/>
        <source>Delete</source>
        <translation type="unfinished">Supprimer</translation>
    </message>
</context>
<context>
    <name>CheckDocument</name>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="877"/>
        <source>Glyphs missing</source>
        <translation>Caractères manquants</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="878"/>
        <source>Text overflow</source>
        <translation>Débordement de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="879"/>
        <source>Object is not on a Page</source>
        <translation>L&apos;objet n&apos;est pas sur une page</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="880"/>
        <source>Missing Image</source>
        <translation>Image manquante</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="884"/>
        <source>Object has transparency</source>
        <translation>L&apos;objet possède une transparence</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="885"/>
        <source>Object is a PDF Annotation or Field</source>
        <translation>L&apos;objet est une annotation ou un champ PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="886"/>
        <source>Object is a placed PDF</source>
        <translation>L&apos;objet est un PDF placé</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="250"/>
        <source>Document</source>
        <translation>Document</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="254"/>
        <source>No Problems found</source>
        <translation>Aucun problème trouvé</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="656"/>
        <source>Page </source>
        <translation>Page </translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="837"/>
        <source>Free Objects</source>
        <translation>Libérer les objets</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="843"/>
        <source>Problems found</source>
        <translation>Problèmes trouvés </translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="863"/>
        <source>Preflight Verifier</source>
        <translation>Vérificateur</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="865"/>
        <source>Items</source>
        <translation>Objets</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="866"/>
        <source>Problems</source>
        <translation>Problèmes</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="869"/>
        <source>Current Profile:</source>
        <translation>Profil actuel :</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="870"/>
        <source>&amp;Ignore Errors</source>
        <translation>&amp;Ignorer les erreurs</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="871"/>
        <source>Check again</source>
        <translation>Vérifier de nouveau</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="882"/>
        <source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
        <translation>Résolution d&apos;image inférieure à %1 PPP, actuellement %2 x %3 PPP</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="883"/>
        <source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
        <translation>Résolution d&apos;image supérieure à %1 PPP, actuellement %2 x %3 PPP</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="887"/>
        <source>Image is GIF</source>
        <translation>L&apos;image est au format GIF</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="255"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="276"/>
        <source>Transparency used</source>
        <translation>Transparence utilisée</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="279"/>
        <source>Blendmode used</source>
        <translation>Mode de fusion utilisé</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="286"/>
        <source>Layer &quot;%1&quot;</source>
        <translation>Calque &quot;%1&quot;</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="888"/>
        <source>Annotation uses a non TrueType font</source>
        <translation>L&apos;annotation utilise une police non TrueType</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="873"/>
        <source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="874"/>
        <source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="875"/>
        <source>Rerun the document scan to check corrections you may have made</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="881"/>
        <source>Empty Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ChooseStyles</name>
    <message>
        <location filename="../editformats.cpp" line="95"/>
        <source>Choose Styles</source>
        <translation type="obsolete">Choisir les styles</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="100"/>
        <source>Available Styles</source>
        <translation type="obsolete">Styles disponibles</translation>
    </message>
</context>
<context>
    <name>CollectForOutput</name>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="52"/>
        <source>Choose a Directory</source>
        <translation>Sélectionnez un dossier</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="68"/>
        <source>Collecting...</source>
        <translation>Rassemblement...</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="87"/>
        <source>Cannot collect the file: 
%1</source>
        <translation>Impossible de rassembler les éléments du fichier : 
%1</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="73"/>
        <source>Cannot collect all files for output for file:
%1</source>
        <translation>Impossible de rassembler tous les éléments
pour la sortie du fichier %1</translation>
    </message>
</context>
<context>
    <name>ColorManager</name>
    <message>
        <location filename="../../scribus/colorm.cpp" line="54"/>
        <source>Colors</source>
        <translation>Couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="80"/>
        <source>&amp;Import</source>
        <translation>&amp;Importer</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="82"/>
        <source>&amp;New</source>
        <translation>&amp;Nouveau</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="84"/>
        <source>&amp;Edit</source>
        <translation>É&amp;dition</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="88"/>
        <source>D&amp;uplicate</source>
        <translation>&amp;Dupliquer</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="91"/>
        <source>&amp;Delete</source>
        <translation>S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="96"/>
        <source>&amp;Remove Unused</source>
        <translation>Efface&amp;r les couleurs inutilisées</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="103"/>
        <source>Color Sets</source>
        <translation>Jeux de couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="109"/>
        <source>Current Color Set:</source>
        <translation>Jeu de couleurs actuel :</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="140"/>
        <source>&amp;Save Color Set</source>
        <translation>&amp;Enregistrer le jeu de couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="159"/>
        <source>Choose a color set to load</source>
        <translation>Choisissez un jeu de couleurs à charger</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="160"/>
        <source>Save the current color set</source>
        <translation>Enregistrer le jeu de couleurs courant</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="165"/>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation>Effacer les couleurs inutilisées dans le document courant</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="167"/>
        <source>Import colors to the current set from an existing document</source>
        <translation>Ajouter au jeu actuel les couleurs d&apos;un autre document</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="168"/>
        <source>Create a new color within the current set</source>
        <translation>Créer une nouvelle couleur</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="169"/>
        <source>Edit the currently selected color</source>
        <translation>Modifier la couleur sélectionnée</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="170"/>
        <source>Make a copy of the currently selected color</source>
        <translation>Faire un double de la couleur sélectionnée</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="171"/>
        <source>Delete the currently selected color</source>
        <translation>Supprimer la couleur sélectionnée</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="172"/>
        <source>Make the current colorset the default color set</source>
        <translation>Faire du jeu de couleurs courant celui par défaut</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="190"/>
        <source>&amp;Name:</source>
        <translation>&amp;Nom :</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="190"/>
        <source>Choose a Name</source>
        <translation>Choisissez un nom</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="353"/>
        <source>Copy of %1</source>
        <translation>Copie de %1</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="364"/>
        <source>New Color</source>
        <translation>Nouvelle couleur</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="172"/>
        <source>If color management is enabled, a triangle warning indicator is a warning the the color maybe outside of the color gamut of the current printer profile selected.What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. Registration colors will have a registration mark next to the color. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation type="obsolete">Si la gestion des couleurs est activée, un triangle d&apos;avertissement apparaît à côté de la couleur si celle-ci se trouve hors de la gamme du profil d&apos;impression utilisé. Cela signifie que le couleur imprimée sera légèrement différente de celle à l&apos;écran. Les tons directs sont indiquées par un cercle rouge. Pour plus de détails consulter l&apos;aide en ligne, section Color Management.</translation>
    </message>
    <message>
        <location filename="../colorm.cpp" line="428"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;Other Files (*.eps *.epsi *.ps *.ai);;All Files (*)</source>
        <translation type="obsolete">Documents (*.sla *.sla.gz *.scd *.scd.gz);;Autres fichiers (*.eps *.epsi *.ps *.ai);;Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="321"/>
        <source>Information</source>
        <translation>Information</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="321"/>
        <source>Import</source>
        <translation type="obsolete">Importer</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="321"/>
        <source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import. 
Not all files have DSC conformant comments where the color descriptions are located.
 This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
        <translation>Le fichier %1 ne contient pas de couleurs pouvant être importées. 
Si le fichier est basé sur du PostScript, essayez de l&apos;importer avec Fichier-&amp;gt; Importer. 
Tous les fichiers ne contiennent pas de commentaires compatibles DSC dans lesquelles se trouvent les descriptions de couleurs, ce qui empêche leur chargement. 
Pour plus de détails consulter la section Edit Colors de la documentation.</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="173"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="311"/>
        <source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="312"/>
        <source>Import Colors</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorWheel</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
        <source>Monochromatic</source>
        <translation>Monochromatique</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
        <source>Analogous</source>
        <translation>Analogue</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="224"/>
        <source>Complementary</source>
        <translation>Complémentaire</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="142"/>
        <source>Split Complementary</source>
        <translation>Complémentaire divisée</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="143"/>
        <source>Triadic</source>
        <translation>Triadique</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="144"/>
        <source>Tetradic (Double Complementary)</source>
        <translation>Tétradique (complémentaire double)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="44"/>
        <source>Base Color</source>
        <translation>Couleur de base</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="206"/>
        <source>Monochromatic Light</source>
        <translation>Monochromatique clair</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="209"/>
        <source>Monochromatic Dark</source>
        <translation>Monochromatique sombre</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="216"/>
        <source>1st. Analogous</source>
        <translation>1re analogue</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="217"/>
        <source>2nd. Analogous</source>
        <translation>2nd analogue</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="231"/>
        <source>1st. Split</source>
        <translation>1re divisée</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="232"/>
        <source>2nd. Split</source>
        <translation>2e divisée</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="233"/>
        <source>3rd. Split</source>
        <translation>3e divisée</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="234"/>
        <source>4th. Split</source>
        <translation>4e divisée</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="241"/>
        <source>1st. Triadic</source>
        <translation>1re triadique</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="242"/>
        <source>2nd. Triadic</source>
        <translation>2e triadique</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="249"/>
        <source>1st. Tetradic (base opposite)</source>
        <translation>1re tétradique (diamétralement opposée)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="250"/>
        <source>2nd. Tetradic (angle)</source>
        <translation>2e tétradique (angle)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="251"/>
        <source>3rd. Tetradic (angle opposite)</source>
        <translation>3e tétradique (angle opposé)</translation>
    </message>
</context>
<context>
    <name>ColorWheelPlugin</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="47"/>
        <source>&amp;Color Wheel...</source>
        <translation>Cercle chromatique</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="64"/>
        <source>Color setting helper</source>
        <translation>Assistant au paramétrage des couleurs</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="65"/>
        <source>Color selector with color theory included.</source>
        <translation>Nuancier de couleur. Théorie des couleurs inclus.</translation>
    </message>
</context>
<context>
    <name>CommonStrings</name>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="244"/>
        <source>&amp;Apply</source>
        <translation>Appli&amp;quer</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="247"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="251"/>
        <source>None</source>
        <comment>color name</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="254"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="257"/>
        <source>&amp;Save</source>
        <translation>&amp;Enregistrer</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="260"/>
        <source>Warning</source>
        <translation>Attention</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="285"/>
        <source>Custom</source>
        <comment>CommonStrings, custom page size</comment>
        <translation>Sur mesure</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="291"/>
        <source>Single Page</source>
        <translation>Page simple</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="292"/>
        <source>Double Sided</source>
        <translation>Pages en regard</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="293"/>
        <source>3-Fold</source>
        <translation>3 volets</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="294"/>
        <source>4-Fold</source>
        <translation>4 volets</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="330"/>
        <source>Monday</source>
        <translation>Lundi</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="331"/>
        <source>Tuesday</source>
        <translation>Mardi</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="332"/>
        <source>Wednesday</source>
        <translation>Mercredi</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="333"/>
        <source>Thursday</source>
        <translation>Jeudi</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="334"/>
        <source>Friday</source>
        <translation>Vendredi</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="335"/>
        <source>Saturday</source>
        <translation>Samedi</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="336"/>
        <source>Sunday</source>
        <translation>Dimanche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="337"/>
        <source>January</source>
        <translation>Janvier</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="338"/>
        <source>February</source>
        <translation>Février</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="339"/>
        <source>March</source>
        <translation>Mars</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="340"/>
        <source>April</source>
        <translation>Avril</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="341"/>
        <source>May</source>
        <translation>Mai</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="342"/>
        <source>June</source>
        <translation>Juin</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="343"/>
        <source>July</source>
        <translation>Juillet</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="344"/>
        <source>August</source>
        <translation>Août</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="345"/>
        <source>September</source>
        <translation>Septembre</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="346"/>
        <source>October</source>
        <translation>Octobre</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="347"/>
        <source>November</source>
        <translation>Novembre</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="348"/>
        <source>December</source>
        <translation>Décembre</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="262"/>
        <source>Yes</source>
        <translation>Oui</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="263"/>
        <source>No</source>
        <translation>Non</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="264"/>
        <source>&amp;Yes</source>
        <translation>&amp;Oui</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="265"/>
        <source>&amp;No</source>
        <translation>&amp;Non</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="301"/>
        <source>Left Page</source>
        <comment>Left page location</comment>
        <translation>Page gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="302"/>
        <source>Middle</source>
        <comment>Middle page location</comment>
        <translation>Centre</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="303"/>
        <source>Middle Left</source>
        <comment>Middle Left page location</comment>
        <translation>Milieu gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="304"/>
        <source>Middle Right</source>
        <comment>Middle Right page location</comment>
        <translation>Milieu droit</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="305"/>
        <source>Right Page</source>
        <comment>Right page location</comment>
        <translation>Page droite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="308"/>
        <source>Normal</source>
        <comment>Default single master page</comment>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="310"/>
        <source>Normal Left</source>
        <comment>Default left master page</comment>
        <translation>Normal gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="312"/>
        <source>Normal Middle</source>
        <comment>Default middle master page</comment>
        <translation>Normal centre</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="314"/>
        <source>Normal Right</source>
        <comment>Default right master page</comment>
        <translation>Normal droite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="356"/>
        <source>Normal Vision</source>
        <comment>Color Blindness - Normal Vision</comment>
        <translation>Vision normale</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="357"/>
        <source>Protanopia (Red)</source>
        <comment>Color Blindness - Red Color Blind</comment>
        <translation>Cécité au rouge</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="358"/>
        <source>Deuteranopia (Green)</source>
        <comment>Color Blindness - Greed Color Blind</comment>
        <translation>Cécité au vert</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="359"/>
        <source>Tritanopia (Blue)</source>
        <comment>Color Blindness - Blue Color Blind</comment>
        <translation>Cécité au bleu</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="360"/>
        <source>Full Color Blindness</source>
        <comment>Color Blindness - Full Color Blindness</comment>
        <translation>Daltonisme</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="362"/>
        <source>Custom: </source>
        <comment>Custom Tab Fill Option</comment>
        <translation>Sur mesure :</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="250"/>
        <source>None</source>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="316"/>
        <source>Solid Line</source>
        <translation>Ligne continue</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="317"/>
        <source>Dashed Line</source>
        <translation>Ligne tiretée</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="318"/>
        <source>Dotted Line</source>
        <translation>Ligne pointillée</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="319"/>
        <source>Dash Dot Line</source>
        <translation>Ligne mixte trait-point</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="320"/>
        <source>Dash Dot Dot Line</source>
        <translation>Ligne mixte trait-point-point</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="364"/>
        <source>None</source>
        <comment>Optical Margin Setting</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="365"/>
        <source>Left Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation>Pénétration à gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="366"/>
        <source>Right Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation>Pénétration à droite</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="367"/>
        <source>Left Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation>Ponctuation flottante à gauche</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="368"/>
        <source>Right Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation>Ponctuation flottante à droite</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Both sides</source>
        <comment>Optical Margin Setting</comment>
        <translation type="obsolete">Des deux côtés</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="372"/>
        <source>Min. Word Tracking</source>
        <translation>Intermot mini.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Norm. Word Tracking</source>
        <translation type="obsolete">Intermot normal</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="376"/>
        <source>Min. Glyph Extension</source>
        <translation>Interlettrage mini.</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="377"/>
        <source>Max. Glyph Extension</source>
        <translation>Interlettrage maxi.</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="369"/>
        <source>Default</source>
        <comment>Optical Margin Setting</comment>
        <translation type="unfinished">Defaut</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="373"/>
        <source>Max. Word Tracking</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="350"/>
        <source>RGB</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">RVB</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="351"/>
        <source>CMYK</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">CMJN</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="352"/>
        <source>Grayscale</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">Niveaux de gris</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="353"/>
        <source>Duotone</source>
        <comment>Colorspace</comment>
        <translation type="unfinished">Bichromie</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="354"/>
        <source>Unknown</source>
        <comment>Colorspace (Unknown)</comment>
        <translation type="unfinished">Inconnu</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="381"/>
        <source>PostScript</source>
        <translation type="unfinished">PostScript</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="267"/>
        <source>Text Frame</source>
        <translation type="unfinished">Cadre de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="268"/>
        <source>Image Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="269"/>
        <source>Line</source>
        <translation type="unfinished">Filet</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="270"/>
        <source>Polygon</source>
        <translation type="unfinished">Polygone</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="271"/>
        <source>Polyline</source>
        <translation type="unfinished">Ligne complexe</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="272"/>
        <source>Text on a Path</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="274"/>
        <source>Multiple</source>
        <comment>Multiple frame types</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="275"/>
        <source>PDF Push Button</source>
        <translation type="unfinished">Bouton poussoir PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="276"/>
        <source>PDF Text Field</source>
        <translation type="unfinished">Champ texte PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="277"/>
        <source>PDF Check Box</source>
        <translation type="unfinished">Case à cocher PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="278"/>
        <source>PDF Combo Box</source>
        <translation type="unfinished">Zone de liste PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="279"/>
        <source>PDF List Box</source>
        <translation type="unfinished">Liste déroulante PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="280"/>
        <source>PDF Text Annotation</source>
        <translation type="unfinished">Annotation de texte PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="281"/>
        <source>PDF Link Annotation</source>
        <translation type="unfinished">Annotation de lien PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="388"/>
        <source>PostScript Level 1</source>
        <translation type="unfinished">PostScript niveau 1</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="390"/>
        <source>PostScript Level 2</source>
        <translation type="unfinished">PostScript niveau 2</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="392"/>
        <source>PostScript Level 3</source>
        <translation type="unfinished">PostScript niveau 3</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="394"/>
        <source>Windows GDI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="273"/>
        <source>Render Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="325"/>
        <source>Default Paragraph Style</source>
        <translation type="unfinished">Style de paragraphe par défaut</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="326"/>
        <source>Default Character Style</source>
        <translation type="unfinished">Style de caractères par défaut</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="327"/>
        <source>Default Line Style</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ContextMenu</name>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="210"/>
        <source>Preview Settings</source>
        <translation type="unfinished">Paramètres de l&apos;aperçu</translation>
    </message>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="421"/>
        <source>Paste File...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="454"/>
        <source>Delete Page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="182"/>
        <source>Paste Image from Clipboard</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageBase</name>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="16"/>
        <source>Convert Page to Master Page</source>
        <translation type="unfinished">Convertir la page en gabarit</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="24"/>
        <source>Name:</source>
        <translation type="unfinished">Nom :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="39"/>
        <source>Copy Applied Master Page Items</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageDialog</name>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpagedialog.cpp" line="18"/>
        <source>New Master Page %1</source>
        <translation type="unfinished">Nouveau gabarit %1</translation>
    </message>
</context>
<context>
    <name>Cpalette</name>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="984"/>
        <source> pt</source>
        <translation> pt</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="985"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1001"/>
        <source>Shade:</source>
        <translation>Teinte :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1002"/>
        <source>Opacity:</source>
        <translation>Opacité :</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="922"/>
        <source>X1:</source>
        <translation type="obsolete">X1 :</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="923"/>
        <source>Y1:</source>
        <translation type="obsolete">Y1 :</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="924"/>
        <source>X2:</source>
        <translation type="obsolete">X2 :</translation>
    </message>
    <message>
        <location filename="../cpalette.cpp" line="925"/>
        <source>Y2:</source>
        <translation type="obsolete">Y2 :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1003"/>
        <source>Move Vector</source>
        <translation>Déplacer le vecteur</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1020"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1008"/>
        <source>Horizontal Gradient</source>
        <translation>Dégradé horizontal</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1009"/>
        <source>Vertical Gradient</source>
        <translation>Dégradé vertical</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1010"/>
        <source>Diagonal Gradient</source>
        <translation>Dégradé montant</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1011"/>
        <source>Cross Diagonal Gradient</source>
        <translation>Dégradé descendant</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1012"/>
        <source>Radial Gradient</source>
        <translation>Dégradé circulaire</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1013"/>
        <source>Free linear Gradient</source>
        <translation>Dégradé linéaire libre</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1014"/>
        <source>Free radial Gradient</source>
        <translation>Dégradé circulaire libre</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1038"/>
        <source>Edit Line Color Properties</source>
        <translation>Modifier la couleur des filets</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1039"/>
        <source>Edit Fill Color Properties</source>
        <translation>Modifier la couleur de fond</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1040"/>
        <source>Saturation of color</source>
        <translation>Saturation de la couleur</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1041"/>
        <source>Normal or gradient fill method</source>
        <translation>Méthode de remplissage par dégradé ou non</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1042"/>
        <source>Set the transparency for the color selected</source>
        <translation>Définir la transparence de la couleur sélectionnée</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1043"/>
        <source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
        <translation>Déplacer le point de départ du gradient avec le bouton gauche de la souris enfoncé, et le point d&apos;arrivée avec le bouton droit de la souris enfoncé</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1017"/>
        <source>Transparency Settings</source>
        <translation>Réglages de transparence</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1018"/>
        <source>Blend Mode:</source>
        <translation>Mode de fusion :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1021"/>
        <source>Darken</source>
        <translation>Assombrir</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1022"/>
        <source>Lighten</source>
        <translation>Eclaircir</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1023"/>
        <source>Multiply</source>
        <translation>Multiplier</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1024"/>
        <source>Screen</source>
        <translation>Écran</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1025"/>
        <source>Overlay</source>
        <translation>Superposer</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1026"/>
        <source>Hard Light</source>
        <translation>Lumière dure</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1027"/>
        <source>Soft Light</source>
        <translation>Lumière douce</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1028"/>
        <source>Difference</source>
        <translation>Différence</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1030"/>
        <source>Color Dodge</source>
        <translation>Densité couleur -</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1031"/>
        <source>Color Burn</source>
        <translation>Densité couleur +</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1032"/>
        <source>Hue</source>
        <translation>Teinte</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1033"/>
        <source>Saturation</source>
        <translation>Saturation</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1034"/>
        <source>Color</source>
        <translation>Couleur</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1035"/>
        <source>Luminosity</source>
        <translation>Luminosité</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="988"/>
        <source>Offsets</source>
        <translation>Décalages</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="989"/>
        <source>X:</source>
        <translation>X :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="991"/>
        <source>Y:</source>
        <translation>
Y :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="993"/>
        <source>Scaling</source>
        <translation>Mise à l&apos;échelle</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="998"/>
        <source>Rotation</source>
        <translation>Rotation</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="999"/>
        <source>Angle</source>
        <translation>Angle</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1015"/>
        <source>Pattern</source>
        <translation>Motif</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1029"/>
        <source>Exclusion</source>
        <translation>Exclusion</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="994"/>
        <source>X-Scale:</source>
        <translation>Echelle en X :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="996"/>
        <source>Y-Scale:</source>
        <translation>Echelle en Y :</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1036"/>
        <source>Display only used Colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1044"/>
        <source>Display all colors from the document color list, or only the already used colors</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CreateRange</name>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="13"/>
        <source>Create Range</source>
        <translation type="unfinished">Créer un intervalle</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="54"/>
        <source>Number of Pages in Document:</source>
        <translation type="unfinished">Nombre de pages dans le document :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="64"/>
        <source>Doc Page Range</source>
        <translation type="unfinished">Intervalle de pages</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="112"/>
        <source>Basic Range Selection</source>
        <translation type="unfinished">Sélection basique d&apos;intervalle</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="136"/>
        <source>Range of Pages</source>
        <translation type="unfinished">Intervalle de pages</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="160"/>
        <source>De&amp;lete</source>
        <translation type="unfinished">Su&amp;pprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="163"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="186"/>
        <source>Move &amp;Down</source>
        <translation type="unfinished">&amp;Descendre</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="189"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="196"/>
        <source>Move &amp;Up</source>
        <translation type="unfinished">Mo&amp;nter</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="199"/>
        <source>Alt+U</source>
        <translation type="unfinished">Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="218"/>
        <source>Add a Range of Pages</source>
        <translation type="unfinished">Ajouter un intervalle de pages</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="242"/>
        <source>Consecutive Pages</source>
        <translation type="unfinished">Pages consécutives</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="252"/>
        <source>Even Pages</source>
        <translation type="unfinished">Pages paires</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="259"/>
        <source>From:</source>
        <translation type="unfinished">De :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="291"/>
        <source>To:</source>
        <translation type="unfinished">à :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="334"/>
        <source>&amp;Add To Range</source>
        <translation type="unfinished">&amp;Ajouter à l&apos;intervalle</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="337"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="362"/>
        <source>Odd Pages</source>
        <translation type="unfinished">Pages impaires</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="372"/>
        <source>Comma Separated List</source>
        <translation type="unfinished">Liste séparée par des virgules</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="383"/>
        <source>Advanced Reordering</source>
        <translation type="unfinished">Réarrangement avancé</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="439"/>
        <source>Page Order</source>
        <translation type="unfinished">Ordre des pages</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="449"/>
        <source>Sample Page Order:</source>
        <translation type="unfinished">Example d&apos;ordre des pages :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="478"/>
        <source>Page Group Size:</source>
        <translation type="unfinished">Taille du groupe de pages :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="525"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="528"/>
        <source>Alt+O</source>
        <translation type="unfinished">Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="535"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="538"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
</context>
<context>
    <name>CreateRangeBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Create Range</source>
        <translation type="obsolete">Créer un intervalle</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Number of Pages in Document:</source>
        <translation type="obsolete">Nombre de pages dans le document :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Doc Page Range</source>
        <translation type="obsolete">Intervalle de pages</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Basic Range Selection</source>
        <translation type="obsolete">Sélection basique d&apos;intervalle</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Add a Range of Pages</source>
        <translation type="obsolete">Ajouter un intervalle de pages</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Consecutive Pages</source>
        <translation type="obsolete">Pages consécutives</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>From:</source>
        <translation type="obsolete">De :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>To:</source>
        <translation type="obsolete">à :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Comma Separated List</source>
        <translation type="obsolete">Liste séparée par des virgules</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Even Pages</source>
        <translation type="obsolete">Pages paires</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Odd Pages</source>
        <translation type="obsolete">Pages impaires</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Add To Range</source>
        <translation type="obsolete">&amp;Ajouter à l&apos;intervalle</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Range of Pages</source>
        <translation type="obsolete">Intervalle de pages</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Move &amp;Up</source>
        <translation type="obsolete">Mo&amp;nter</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+U</source>
        <translation type="obsolete">Alt+U</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Move &amp;Down</source>
        <translation type="obsolete">&amp;Descendre</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>De&amp;lete</source>
        <translation type="obsolete">Su&amp;pprimer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Advanced Reordering</source>
        <translation type="obsolete">Réarrangement avancé</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Page Group Size:</source>
        <translation type="obsolete">Taille du groupe de pages :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Sample Page Order:</source>
        <translation type="obsolete">Example d&apos;ordre des pages :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Page Order</source>
        <translation type="obsolete">Ordre des pages</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>CsvDialog</name>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="27"/>
        <source>CSV Importer Options</source>
        <translation>Options d&apos;importations des fichiers CSV</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="37"/>
        <source>Field delimiter:</source>
        <translation>Délimiteur de champ :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="89"/>
        <source>(TAB)</source>
        <translation>Tabulation</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="53"/>
        <source>Value delimiter:</source>
        <translation>Délimiteur de valeur :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="59"/>
        <source>None</source>
        <comment>delimiter</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="68"/>
        <source>First row is a header</source>
        <translation>La première ligne est une en-tête</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="76"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="79"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
</context>
<context>
    <name>CupsOptions</name>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="52"/>
        <source>Printer Options</source>
        <translation>Options d&apos;impression</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="143"/>
        <source>Page Set</source>
        <translation>Format de la page</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="147"/>
        <source>All Pages</source>
        <translation>Toutes les pages</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="141"/>
        <source>Even Pages only</source>
        <translation>Pages paires</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="142"/>
        <source>Odd Pages only</source>
        <translation>Pages impaires</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="160"/>
        <source>Mirror</source>
        <translation>Miroir</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="177"/>
        <source>Orientation</source>
        <translation>Orientation</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="181"/>
        <source>Portrait</source>
        <translation>Portrait (à la française)</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="175"/>
        <source>Landscape</source>
        <translation>Paysage (à l&apos;italienne)</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="197"/>
        <source>N-Up Printing</source>
        <translation>Page(s) par feuille</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="201"/>
        <source>Page per Sheet</source>
        <translation>Page par feuille</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="196"/>
        <source>Pages per Sheet</source>
        <translation>Pages par feuille</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="63"/>
        <source>Option</source>
        <translation>Option</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="64"/>
        <source>Value</source>
        <translation>Valeur</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="224"/>
        <source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
        <translation>Ce panneau montre les options d&apos;impression CUPS. Les paramètres disponibles dépendent de votre pilote d&apos;imprimante. Vous pouvez vérifier le support de CUPS en sélectionnant Aide &gt; À propos de Scribus.Dans l&apos;identifiant de compilation, le symbole C-C-T indique le support de C=CUPS C=littlecms T=TIFF. Les bibliothèques manquantes sont indiquées par une *</translation>
    </message>
</context>
<context>
    <name>CurveWidget</name>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="414"/>
        <source>Open</source>
        <translation>Ouvrir</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="449"/>
        <source>Curve Files (*.scu);;All Files (*)</source>
        <translation>Fichiers de courbes (*.scu);; Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="449"/>
        <source>Save as</source>
        <translation>Enregistrer sous</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="483"/>
        <source>Cannot write the file: 
%1</source>
        <translation>Impossible d&apos;enregistrer le fichier : 
%1</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="509"/>
        <source>Inverts the curve</source>
        <translation>Insére la courbe</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="510"/>
        <source>Resets the curve</source>
        <translation>Réinitialise la courbe</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="511"/>
        <source>Switches between linear and cubic interpolation of the curve</source>
        <translation>Passe l&apos;interpolation de la courbe de cubique à linéaire</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="512"/>
        <source>Loads a curve</source>
        <translation>Charge une courbe</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="513"/>
        <source>Saves this curve</source>
        <translation>Enregistrer cette courbe</translation>
    </message>
</context>
<context>
    <name>CustomFDialog</name>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="327"/>
        <source>&amp;Compress File</source>
        <translation>&amp;Compresser le fichier</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="306"/>
        <source>&amp;Include Fonts</source>
        <translation>&amp;Inclure les polices</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="355"/>
        <source>Encoding:</source>
        <translation>Codage :</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="366"/>
        <source>Moves to your Document Directory.
This can be set in the Preferences.</source>
        <translation type="obsolete">Revenir dans le dossier des documents. Celui-ci
peut être défini à partir du menu Préférences.</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="314"/>
        <source>&amp;Include ICC Profiles</source>
        <translation type="obsolete">&amp;Inclure les profils ICC</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="274"/>
        <source>Show Preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="308"/>
        <source>&amp;Include Color Profiles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="275"/>
        <source>Show a preview and information for the selected file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="342"/>
        <source>Compress the Scribus document on save</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="344"/>
        <source>Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="346"/>
        <source>Include color profiles when collecting files for the document</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DashEditor</name>
    <message>
        <location filename="../../scribus/dasheditor.cpp" line="363"/>
        <source>Value:</source>
        <translation type="unfinished">Valeur :</translation>
    </message>
    <message>
        <location filename="../../scribus/dasheditor.cpp" line="364"/>
        <source>Offset:</source>
        <translation type="unfinished">Décalage :</translation>
    </message>
</context>
<context>
    <name>DeferredTask</name>
    <message>
        <location filename="../../scribus/deferredtask.cpp" line="82"/>
        <source>Cancelled by user</source>
        <translation>Annulé par l&apos;utilisateur</translation>
    </message>
</context>
<context>
    <name>DelColor</name>
    <message>
        <location filename="../../scribus/dcolor.cpp" line="28"/>
        <source>Delete Color</source>
        <translation>Supprimer la couleur</translation>
    </message>
    <message>
        <location filename="../../scribus/dcolor.cpp" line="36"/>
        <source>Delete Color:</source>
        <translation>Supprimer la couleur :</translation>
    </message>
    <message>
        <location filename="../../scribus/dcolor.cpp" line="45"/>
        <source>Replace With:</source>
        <translation>Substituer par :</translation>
    </message>
</context>
<context>
    <name>DelPages</name>
    <message>
        <location filename="../../scribus/delpages.cpp" line="17"/>
        <source>Delete Pages</source>
        <translation>Supprimer une(des) page(s)</translation>
    </message>
    <message>
        <location filename="../../scribus/delpages.cpp" line="26"/>
        <source>Delete From:</source>
        <translation>Supprimer de :</translation>
    </message>
    <message>
        <location filename="../../scribus/delpages.cpp" line="34"/>
        <source>to:</source>
        <translation>à :</translation>
    </message>
</context>
<context>
    <name>DelStyle</name>
    <message>
        <location filename="../editformats.cpp" line="36"/>
        <source>Delete Style</source>
        <translation type="obsolete">Détruire le style</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="42"/>
        <source>Delete Style:</source>
        <translation type="obsolete">Détruire le style :</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="46"/>
        <source>Replace With:</source>
        <translation type="obsolete">Substituer par :</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="49"/>
        <source>No Style</source>
        <translation type="obsolete">Aucun style</translation>
    </message>
</context>
<context>
    <name>DocIm</name>
    <message>
        <location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="160"/>
        <source>Importing failed</source>
        <translation>Echec de l&apos;importation</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="161"/>
        <source>Importing Word document failed 
%1</source>
        <translation>Impossible d&apos;importer le document Word 
%1</translation>
    </message>
</context>
<context>
    <name>DocInfos</name>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="30"/>
        <source>Document Information</source>
        <translation>Informations sur le document</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="39"/>
        <source>&amp;Title:</source>
        <translation>&amp;Titre :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="46"/>
        <source>&amp;Author:</source>
        <translation>A&amp;uteur :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="53"/>
        <source>&amp;Keywords:</source>
        <translation>&amp;Mots clés :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="61"/>
        <source>Descri&amp;ption:</source>
        <translation>Descri&amp;ption :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="74"/>
        <source>P&amp;ublisher:</source>
        <translation>Édite&amp;ur :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="81"/>
        <source>&amp;Contributors:</source>
        <translation>&amp;Contributeur(s) :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="89"/>
        <source>Dat&amp;e:</source>
        <translation>Dat&amp;e :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="96"/>
        <source>T&amp;ype:</source>
        <translation>T&amp;ype :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="103"/>
        <source>F&amp;ormat:</source>
        <translation>For&amp;mat :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="110"/>
        <source>Identi&amp;fier:</source>
        <translation>Identi&amp;fiant :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="117"/>
        <source>&amp;Source:</source>
        <translation>&amp;Source :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="124"/>
        <source>&amp;Language:</source>
        <translation>&amp;Langue :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="131"/>
        <source>&amp;Relation:</source>
        <translation>En &amp;rapport :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="138"/>
        <source>Co&amp;verage:</source>
        <translation>&amp;Domaine traité :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="145"/>
        <source>Ri&amp;ghts:</source>
        <translation>Droi&amp;ts :</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="152"/>
        <source>Documen&amp;t</source>
        <translation>Documen&amp;t</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="153"/>
        <source>Further &amp;Information</source>
        <translation>Autres &amp;informations</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="159"/>
        <source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>Personne ou organisation responsable du contenu du document.
Ce champ peut être inclus dans le document Scribus pour référence, en plus des métadonnées d&apos;un fichier PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="160"/>
        <source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>Nom donné au document. Ce champ peut être inclus dans le document Scribus pour référence, en plus des métadonnées d&apos;un fichier PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="161"/>
        <source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
        <translation>Ce champ est utilisé pour faire une brève description ou un résumé du document. Il est inclus dans le fichier PDF lors d&apos;une exportation</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="162"/>
        <source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
        <translation>Ce champ est utilisé pour définir des mots clés à inclure dans un fichier PDF, ce qui facilite les recherches et l&apos;indexation des fichiers de ce type</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="163"/>
        <source>A person or organisation responsible for making the document available</source>
        <translation>Personne ou organisation responsable de la diffusion du document</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="164"/>
        <source>A person or organisation responsible for making contributions to the content of the document</source>
        <translation>Personne(s) ou organisation(s) contribuant au contenu du document</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="165"/>
        <source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
        <translation>Date associée à des modifications du document, au format AAAA-MM-JJ, suivant la norme ISO 8601</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="166"/>
        <source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
        <translation>Nature du contenu du document</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="167"/>
        <source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
        <translation>Informations pratiques sur le document. Voir les RFC 2045 et 2046 pour les types MIME</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="168"/>
        <source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
        <translation>Référence précise du document, ainsi que son contexte. Par exemple ISBN ou URI</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="169"/>
        <source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
        <translation>Référence à un document à l&apos;origine de la création de la composition</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="170"/>
        <source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
        <translation>Langue utilisée dans le document, idéalement au format ISO-639, et éventuellement suivi du code pays au format ISO-3166 (par exemple fr-CH)</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="171"/>
        <source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
        <translation>Document(s) en rapport avec la composition</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="172"/>
        <source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
        <translation>Limite(s) d&apos;application du contenu du document, tels un espace géographique, une durée ou une juridiction</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="173"/>
        <source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
        <translation>Informations sur les droits du document tels un copyright, un brevet ou une marque déposée</translation>
    </message>
</context>
<context>
    <name>DocSections</name>
    <message>
        <location filename="../../scribus/docsections.cpp" line="72"/>
        <source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
        <translation>Ajoute une section à pages numérotées dans le document. La nouvelle section sera ajoutée après la section actuellement sélectionnée.</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="73"/>
        <source>Delete the currently selected section.</source>
        <translation>Supprimer la section sélectionnée</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="79"/>
        <source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
        <translation>&lt;b&gt;Nom :&lt;/b&gt; nom optionnel pour la section. Par ex. Index&lt;br/&gt;&lt;b&gt;Visible :&lt;/b&gt; les numéros des pages seront affichés pour cette section s&apos;il y a au moins un cadre de texte configuré pour ce faire.&lt;br/&gt;&lt;b&gt;De :&lt;/b&gt; premier numéro de page de cette section.&lt;br/&gt;&lt;b&gt;A :&lt;/b&gt; dernier numéro de page de cette section.&lt;br/&gt;&lt;b&gt;Style :&lt;/b&gt; style de numéro de page à utiliser.&lt;br/&gt;&lt;b&gt;Départ :&lt;/b&gt; index de début de numérotation. Par ex, si Départ=2 etStyle=a,b,c,..., les numéros de page débuteront à b. Pour la première section du document, ceci remplace l&apos;ancien Premier numéro de page du dialogue Nouveau document.</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>1, 2, 3, ...</source>
        <translation>1,·2,·3,·...</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>i, ii, iii, ...</source>
        <translation>i,·ii,·iii,·...</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>I, II, III, ...</source>
        <translation>I,·II,·III,·...</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>a, b, c, ...</source>
        <translation>a,·b,·c,·...</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>A, B, C, ...</source>
        <translation>A,·B,·C,·...</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="201"/>
        <source>Page Number Out Of Bounds</source>
        <translation>Numéro de page hors plage</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="201"/>
        <source>The value you have entered is outside the range of page numbers in the current document (%1-%2).</source>
        <translation>La valeur que vous avez entrée est plus grande que le nombre de pages du présent document (%1-%2).</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="13"/>
        <source>Document Sections</source>
        <translation type="unfinished">Sections du document</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="83"/>
        <source>&amp;Add</source>
        <translation type="unfinished">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="86"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="93"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="96"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="32"/>
        <source>Name</source>
        <translation type="unfinished">Nom</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="37"/>
        <source>Shown</source>
        <translation type="unfinished">Montré</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="42"/>
        <source>From</source>
        <translation type="unfinished">De</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="47"/>
        <source>To</source>
        <translation type="unfinished">à</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="52"/>
        <source>Style</source>
        <translation type="unfinished">Style</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="57"/>
        <source>Start</source>
        <translation type="unfinished">Départ</translation>
    </message>
</context>
<context>
    <name>DocSectionsBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Document Sections</source>
        <translation type="obsolete">Sections du document</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Name</source>
        <translation type="obsolete">Nom</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Shown</source>
        <translation type="obsolete">Montré</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>From</source>
        <translation type="obsolete">De</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Style</source>
        <translation type="obsolete">Style</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Start</source>
        <translation type="obsolete">Départ</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Add</source>
        <translation type="obsolete">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributes</name>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>None</source>
        <comment>relationship</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>Relates To</source>
        <translation>Relatif à</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>Is Parent Of</source>
        <translation>Est le parent de</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>Is Child Of</source>
        <translation>Est le fils de </translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
        <source>None</source>
        <comment>auto add</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
        <source>Text Frames</source>
        <translation>Cadres de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
        <source>Image Frames</source>
        <translation>Cadres d&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>None</source>
        <comment>types</comment>
        <translation>Aucune</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>Boolean</source>
        <translation>Booléen</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>Integer</source>
        <translation>Entier</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>Real Number</source>
        <translation>Nombre réel</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>String</source>
        <translation>Chaîne de caractères</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="13"/>
        <source>Document Item Attributes</source>
        <translation type="unfinished">Réglage du document</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="82"/>
        <source>&amp;Add</source>
        <translation type="unfinished">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="85"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="92"/>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Copier</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="95"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="102"/>
        <source>&amp;Delete</source>
        <translation type="unfinished">S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="105"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="112"/>
        <source>C&amp;lear</source>
        <translation type="unfinished">&amp;Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="115"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="26"/>
        <source>Name</source>
        <translation type="unfinished">Nom</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="31"/>
        <source>Type</source>
        <translation type="unfinished">Type</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="36"/>
        <source>Value</source>
        <translation type="unfinished">Valeur</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="41"/>
        <source>Parameter</source>
        <translation type="unfinished">Paramètre</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="46"/>
        <source>Relationship</source>
        <translation type="unfinished">En rapport</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="51"/>
        <source>Relationship To</source>
        <translation type="unfinished">En rapport à</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="56"/>
        <source>Auto Add To</source>
        <translation type="unfinished">Ajouter automatiquement à</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributesBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Document Item Attributes</source>
        <translation type="obsolete">Réglage du document</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Name</source>
        <translation type="obsolete">Nom</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Value</source>
        <translation type="obsolete">Valeur</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Parameter</source>
        <translation type="obsolete">Paramètre</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Relationship</source>
        <translation type="obsolete">En rapport</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Relationship To</source>
        <translation type="obsolete">En rapport à</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Auto Add To</source>
        <translation type="obsolete">Ajouter automatiquement à</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Add</source>
        <translation type="obsolete">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Copy</source>
        <translation type="obsolete">&amp;Copier</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>C&amp;lear</source>
        <translation type="obsolete">&amp;Effacer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
</context>
<context>
    <name>EPSPlug</name>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="473"/>
        <source>Importing File:
%1
failed!</source>
        <translation>Impossible d&apos;importer le fichier suivant :
%1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="474"/>
        <source>Fatal Error</source>
        <translation>Erreur fatale</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="872"/>
        <source>Error</source>
        <translation>Erreur</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="83"/>
        <source>Analyzing PostScript:</source>
        <translation>Analyse du fichier PostScript :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="479"/>
        <source>Generating Items</source>
        <translation>Création des objets</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="871"/>
        <source>Converting of %1 images failed!</source>
        <translation>Echec de la conversion de %1 images !</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="738"/>
        <source>Group%1</source>
        <translation>Groupe %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="80"/>
        <source>Importing: %1</source>
        <translation>Importation : %1</translation>
    </message>
</context>
<context>
    <name>EditStyle</name>
    <message>
        <location filename="../edit1format.cpp" line="47"/>
        <source>Edit Style</source>
        <translation type="obsolete">Édition du style</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="67"/>
        <source>&amp;Name:</source>
        <translation type="obsolete">&amp;Nom :</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="80"/>
        <source>Character</source>
        <translation type="obsolete">Caractère spécial</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="272"/>
        <source> pt</source>
        <translation type="obsolete"> pt</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="239"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="200"/>
        <source>Distances</source>
        <translation type="obsolete">Distances</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="209"/>
        <source>Fixed Linespacing</source>
        <translation type="obsolete">Interlignage fixe</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="211"/>
        <source>Align to Baseline Grid</source>
        <translation type="obsolete">Aligner le texte sur la grille</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="257"/>
        <source>Drop Caps</source>
        <translation type="obsolete">Lettrines</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="268"/>
        <source>&amp;Lines:</source>
        <translation type="obsolete">&amp;Lignes :</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="274"/>
        <source>Distance from Text:</source>
        <translation type="obsolete">Distance au texte :</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="300"/>
        <source>Tabulators and Indentation</source>
        <translation type="obsolete">Tabulations et retrait</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="324"/>
        <source>Preview of the Paragraph Style</source>
        <translation type="obsolete">Aperçu des styles de paragraphe</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="328"/>
        <source>Background</source>
        <translation type="obsolete">Fond de page</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="360"/>
        <source>Name of your paragraph style</source>
        <translation type="obsolete">Nom du style de paragraphe</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="361"/>
        <source>Font of selected text or object</source>
        <translation type="obsolete">Police du texte ou de l&apos;objet sélectionné</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="362"/>
        <source>Font Size</source>
        <translation type="obsolete">Corps</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="363"/>
        <source>Color of text fill</source>
        <translation type="obsolete">Couleur du texte</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="364"/>
        <source>Color of text stroke</source>
        <translation type="obsolete">Couleur des contours du texte</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="366"/>
        <source>Determines the overall height, in line numbers, of the Drop Caps</source>
        <translation type="obsolete">Définit la hauteur des lettrines, en nombre de lignes</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="367"/>
        <source>Determines the gap between the DropCaps and the Text</source>
        <translation type="obsolete">Définit la distance entre les lettrines et le texte</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="369"/>
        <source>Spacing above the paragraph</source>
        <translation type="obsolete">Mettre une espace au-dessus du paragraphe</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="370"/>
        <source>Spacing below the paragraph</source>
        <translation type="obsolete">Mettre une espace en dessous du paragraphe</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="373"/>
        <source>Line Spacing</source>
        <translation type="obsolete">Interlignage</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="375"/>
        <source>Toggles sample text of this paragraph style</source>
        <translation type="obsolete">Afficher un exemple de ce style de paragraphe</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="508"/>
        <source>Name of the style is not unique</source>
        <translation type="obsolete">Ce nom de style existe déjà</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="374"/>
        <source>Click to select the line spacing mode</source>
        <translation type="obsolete">Cliquer pour choisir le mode d&apos;interlignage</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="210"/>
        <source>Automatic Linespacing</source>
        <translation type="obsolete">Interlignage automatique</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="371"/>
        <source>Manual Tracking</source>
        <translation type="obsolete">Réglage de l&apos;approche</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="372"/>
        <source>Offset to baseline of characters</source>
        <translation type="obsolete">Décalage des caractères par rapport à la ligne de base</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="359"/>
        <source>Select for easier reading of light colored text styles</source>
        <translation type="obsolete">Activer pour une meilleure lecture des styles de texte clairs</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="448"/>
        <source>Auto</source>
        <translation type="obsolete">Automatique</translation>
    </message>
</context>
<context>
    <name>EditToolBar</name>
    <message>
        <location filename="../../scribus/ui/edittoolbar.cpp" line="29"/>
        <source>Edit</source>
        <translation type="unfinished">Modifier</translation>
    </message>
</context>
<context>
    <name>Editor</name>
    <message>
        <location filename="../../scribus/editor.cpp" line="30"/>
        <source>Editor</source>
        <translation>Éditeur</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="36"/>
        <source>&amp;New</source>
        <translation>&amp;Nouveau</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="39"/>
        <source>&amp;Open...</source>
        <translation>&amp;Ouvrir...</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="41"/>
        <source>Save &amp;As...</source>
        <translation>Enregistrer &amp;sous...</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="43"/>
        <source>&amp;Save and Exit</source>
        <translation>&amp;Enregistrer et quitter</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="45"/>
        <source>&amp;Exit without Saving</source>
        <translation>&amp;Quitter sans enregistrer</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="47"/>
        <source>&amp;Undo</source>
        <translation>Ann&amp;uler</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="50"/>
        <source>&amp;Redo</source>
        <translation>&amp;Rétablir</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="52"/>
        <source>Cu&amp;t</source>
        <translation>Cou&amp;per</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="55"/>
        <source>&amp;Copy</source>
        <translation>&amp;Copier</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="58"/>
        <source>&amp;Paste</source>
        <translation>Co&amp;ller</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="61"/>
        <source>C&amp;lear</source>
        <translation>&amp;Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="63"/>
        <source>&amp;Get Field Names</source>
        <translation>O&amp;btenir les noms des champs</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="65"/>
        <source>&amp;File</source>
        <translation>&amp;Fichier</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="72"/>
        <source>&amp;Edit</source>
        <translation>É&amp;dition</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="127"/>
        <source>JavaScripts (*.js);;All Files (*)</source>
        <translation>Javascripts (*.js);;Tous les fichiers (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="37"/>
        <source>Ctrl+N</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="48"/>
        <source>Ctrl+Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="53"/>
        <source>Ctrl+X</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="56"/>
        <source>Ctrl+C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="59"/>
        <source>Ctrl-V</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EffectsDialog</name>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="44"/>
        <source>Image Effects</source>
        <translation>Effets</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="81"/>
        <source>Options:</source>
        <translation>Options :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="98"/>
        <source>Color:</source>
        <translation>Couleur :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="109"/>
        <source>Shade:</source>
        <translation>Teinte :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="125"/>
        <source>Brightness:</source>
        <translation>Luminosité :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="147"/>
        <source>Contrast:</source>
        <translation>Contraste :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="198"/>
        <source>Radius:</source>
        <translation>Rayon :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="180"/>
        <source>Value:</source>
        <translation>Valeur :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="216"/>
        <source>Posterize:</source>
        <translation>Postériser :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="500"/>
        <source>Available Effects</source>
        <translation>Effets disponibles</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1393"/>
        <source>Blur</source>
        <translation>Flou</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1371"/>
        <source>Brightness</source>
        <translation>Luminosité</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1362"/>
        <source>Colorize</source>
        <translation>Coloriser</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1377"/>
        <source>Contrast</source>
        <translation>Contraste</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="981"/>
        <source>Grayscale</source>
        <translation>Niveaux de gris</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="983"/>
        <source>Invert</source>
        <translation>Inverser</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1406"/>
        <source>Posterize</source>
        <translation>Postériser</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1383"/>
        <source>Sharpen</source>
        <translation>Accentuer les contours</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="482"/>
        <source>&gt;&gt;</source>
        <translation>&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="486"/>
        <source>&lt;&lt;</source>
        <translation>&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="497"/>
        <source>Effects in use</source>
        <translation>Effets utilisés</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="616"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="620"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="351"/>
        <source>Color 1:</source>
        <translation>Couleur 1 :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="371"/>
        <source>Color 2:</source>
        <translation>Couleur 2 :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="391"/>
        <source>Color 3:</source>
        <translation>Couleur 3 :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="411"/>
        <source>Color 4:</source>
        <translation>Couleur 4 :</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1412"/>
        <source>Duotone</source>
        <translation>Bichromie</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1448"/>
        <source>Tritone</source>
        <translation>Trichromie</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1499"/>
        <source>Quadtone</source>
        <translation>Quadrichromie</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1565"/>
        <source>Curves</source>
        <translation>Courbes</translation>
    </message>
</context>
<context>
    <name>ExportBitmap</name>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="204"/>
        <source>File exists. Overwrite?</source>
        <translation>Fichier existant. Remplacer ?</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="205"/>
        <source>exists already. Overwrite?</source>
        <translation>existe déjà. Remplacer ?</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>All</source>
        <translation type="obsolete">Tout</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="218"/>
        <source>Save as Image</source>
        <translation type="unfinished">Enregistrer en tant qu&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="192"/>
        <source>Insufficient memory for this image size.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="219"/>
        <source>Error writing the output file(s).</source>
        <translation type="unfinished">Erreur d&apos;écriture du(des) fichier(s) de sortie.</translation>
    </message>
</context>
<context>
    <name>ExportForm</name>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="80"/>
        <source>Choose a Export Directory</source>
        <translation>Sélectionnez un dossier pour l&apos;exportation</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="13"/>
        <source>Export as Image(s)</source>
        <translation>Exportation en tant qu&apos;image(s)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="153"/>
        <source>&amp;Export to Directory:</source>
        <translation>&amp;Exporter vers :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="166"/>
        <source>C&amp;hange...</source>
        <translation>&amp;Parcourir...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="25"/>
        <source>Options</source>
        <translation>Options</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="54"/>
        <source>Image &amp;Type:</source>
        <translation>T&amp;ype d&apos;image :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="64"/>
        <source>&amp;Quality:</source>
        <translation>&amp;Qualité :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="74"/>
        <source>&amp;Resolution:</source>
        <translation>&amp;Résolution :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="84"/>
        <source>&amp;Size:</source>
        <translation>&amp;Taille :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="126"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="110"/>
        <source> dpi</source>
        <translation> ppp</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="175"/>
        <source>Range</source>
        <translation>Sélection</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="197"/>
        <source>&amp;Current page</source>
        <translation>Page &amp;courante</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="224"/>
        <source>&amp;All pages</source>
        <translation>&amp;Toutes les pages</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="217"/>
        <source>&amp;Range</source>
        <translation>&amp;Sélection</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>C</source>
        <translation type="obsolete">C</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="117"/>
        <source>Export a range of pages</source>
        <translation>Exporter une sélection de pages vers un PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="118"/>
        <source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
        <translation>Insérer une liste d&apos;éléments séparés par des virgules,
les éléments pouvant être « * » pour toutes les pages, 1-5 pour
une sélection de pages, ou bien un simple numéro de page.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="119"/>
        <source>Export all pages</source>
        <translation>Exporter toutes les pages</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="120"/>
        <source>Export only the current page</source>
        <translation>Exporter uniquement la page courante</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="121"/>
        <source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
        <translation>Résolution des images
Utiliser 72 ppp pour des images destinées à la lecture sur écran</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="122"/>
        <source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
        <translation>Dimensions des images. 100% pour des dimensions identiques, 200% pour les doubler, etc.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="114"/>
        <source>The quality of your images - 100% is the best, 1% the lowest quality</source>
        <translation type="obsolete">Qualité des images - 100% pour la plus haute, 1% pour la plus basse</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="125"/>
        <source>Available export formats</source>
        <translation>Formats disponibles pour l&apos;exportation</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="126"/>
        <source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
        <translation>Dossier de sortie - endroit où sont placées les images matricielles. Le nom
du fichier exporté est de la forme « nomdudocument-numérodepage.type »</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="127"/>
        <source>Change the output directory</source>
        <translation>Changer de dossier de sortie</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="44"/>
        <source>Image size in Pixels</source>
        <translation>Taille de l&apos;image en pixels</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="37"/>
        <source>TextLabel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="123"/>
        <source>The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use &apos;Automatic&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="124"/>
        <source>Automatic</source>
        <translation type="unfinished">Automatique</translation>
    </message>
</context>
<context>
    <name>ExtImageProps</name>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="39"/>
        <source>Extended Image Properties</source>
        <translation>Propriétés étendues de l&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="102"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="103"/>
        <source>Darken</source>
        <translation>Assombrir</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="104"/>
        <source>Lighten</source>
        <translation>Eclaircir</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="105"/>
        <source>Hue</source>
        <translation>Teinte</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="106"/>
        <source>Saturation</source>
        <translation>Saturation</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="107"/>
        <source>Color</source>
        <translation>Couleur</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="108"/>
        <source>Luminosity</source>
        <translation>Luminosité</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="109"/>
        <source>Multiply</source>
        <translation>Multiplier</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="110"/>
        <source>Screen</source>
        <translation>Écran</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="111"/>
        <source>Dissolve</source>
        <translation>Dissoudre</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="112"/>
        <source>Overlay</source>
        <translation>Superposer</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="113"/>
        <source>Hard Light</source>
        <translation>Lumière dure</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="114"/>
        <source>Soft Light</source>
        <translation>Lumière douce</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="115"/>
        <source>Difference</source>
        <translation>Différence</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="116"/>
        <source>Exclusion</source>
        <translation>Exclusion</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="117"/>
        <source>Color Dodge</source>
        <translation>Densité couleur -</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="118"/>
        <source>Color Burn</source>
        <translation>Densité couleur +</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="98"/>
        <source>Blend Mode:</source>
        <translation>Mode de fusion :</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="121"/>
        <source>Opacity:</source>
        <translation>Opacité :</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="127"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="133"/>
        <source>Name</source>
        <translation>Nom</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="214"/>
        <source>Layers</source>
        <translation>Calques</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="267"/>
        <source>Don&apos;t use any Path</source>
        <translation>N&apos;utiliser aucun chemin</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="269"/>
        <source>Paths</source>
        <translation>Chemins</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="276"/>
        <source>Live Preview</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FDialogPreview</name>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="198"/>
        <source>Size:</source>
        <translation>Corps :</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="199"/>
        <source>Resolution:</source>
        <translation>Résolution :</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="199"/>
        <source>DPI</source>
        <translation>PPP</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="229"/>
        <source>Unknown</source>
        <translation>Inconnu</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="190"/>
        <source>RGB</source>
        <translation type="obsolete">RVB</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="193"/>
        <source>CMYK</source>
        <translation type="obsolete">CMJN</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="196"/>
        <source>Grayscale</source>
        <translation type="obsolete">Niveaux de gris</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="205"/>
        <source>Colorspace:</source>
        <translation>Espace colorimétrique :</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="216"/>
        <source>Title:</source>
        <translation>Titre :</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="219"/>
        <source>No Title</source>
        <translation>Pas de titre</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="221"/>
        <source>Author:</source>
        <translation>Auteur :</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="231"/>
        <source>Scribus Document</source>
        <translation>Document Scribus</translation>
    </message>
    <message>
        <location filename="../customfdialog.cpp" line="199"/>
        <source>Duotone</source>
        <translation type="obsolete">Bichromie</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="226"/>
        <source>File Format:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FileLoader</name>
    <message>
        <location filename="../../scribus/fileloader.cpp" line="593"/>
        <source>Some fonts used by this document have been substituted:</source>
        <translation>Certaines polices utilisées dans ce document ont été substituées :</translation>
    </message>
    <message>
        <location filename="../../scribus/fileloader.cpp" line="597"/>
        <source> was replaced by: </source>
        <translation>a été remplacée par :</translation>
    </message>
</context>
<context>
    <name>FileToolBar</name>
    <message>
        <location filename="../../scribus/ui/filetoolbar.cpp" line="31"/>
        <source>File</source>
        <translation type="unfinished">Fichier</translation>
    </message>
</context>
<context>
    <name>FontComboH</name>
    <message>
        <location filename="../../scribus/fontcombo.cpp" line="148"/>
        <source>Face:</source>
        <translation>Fonte :</translation>
    </message>
    <message>
        <location filename="../../scribus/fontcombo.cpp" line="149"/>
        <source>Style:</source>
        <translation>Style :</translation>
    </message>
</context>
<context>
    <name>FontListModel</name>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="63"/>
        <source>Font Name</source>
        <translation type="unfinished">Nom de la police</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="65"/>
        <source>Use Font</source>
        <translation type="unfinished">Utiliser la police</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="67"/>
        <source>Family</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="69"/>
        <source>Style</source>
        <translation type="unfinished">Style</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="71"/>
        <source>Variant</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="73"/>
        <source>Type</source>
        <translation type="unfinished">Type</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="75"/>
        <source>Format</source>
        <translation type="unfinished">Format</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="77"/>
        <source>Embed in PostScript</source>
        <translation type="unfinished">Incorporer dans le PostScript</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="79"/>
        <source>Subset</source>
        <translation type="unfinished">Jeu partiel</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="81"/>
        <source>Access</source>
        <translation type="unfinished">Accès</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="83"/>
        <source>Used in Doc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="85"/>
        <source>Path to Font File</source>
        <translation type="unfinished">Chemin</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="144"/>
        <source>Unknown</source>
        <comment>font type</comment>
        <translation type="unfinished">Inconnu</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="157"/>
        <source>Unknown</source>
        <comment>font format</comment>
        <translation type="unfinished">Inconnu</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="164"/>
        <source>User</source>
        <comment>font preview</comment>
        <translation type="unfinished">Utilisateur</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="165"/>
        <source>System</source>
        <comment>font preview</comment>
        <translation type="unfinished">Système</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="190"/>
        <source>Click to change the value</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontPrefs</name>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="48"/>
        <source>Available Fonts</source>
        <translation>Polices disponibles</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="48"/>
        <source>Font Substitutions</source>
        <translation>Substitutions de polices</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="48"/>
        <source>Additional Paths</source>
        <translation>Chemins additionnels</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="48"/>
        <source>Font Name</source>
        <comment>font preview</comment>
        <translation type="obsolete">Nom de la police</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="49"/>
        <source>Use Font</source>
        <comment>font preview</comment>
        <translation type="obsolete">Utiliser la police</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="53"/>
        <source>Subset</source>
        <comment>font preview</comment>
        <translation type="obsolete">Jeu partiel</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="55"/>
        <source>Path to Font File</source>
        <comment>font preview</comment>
        <translation type="obsolete">Chemin</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="58"/>
        <source>&amp;Available Fonts</source>
        <translation>Polices &amp;disponibles</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="66"/>
        <source>Font Name</source>
        <translation>Nom de la police</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="67"/>
        <source>Replacement</source>
        <translation>Substitution</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="82"/>
        <source>&amp;Delete</source>
        <translation>S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="88"/>
        <source>Font &amp;Substitutions</source>
        <translation>&amp;Substitutions de polices</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="107"/>
        <source>C&amp;hange...</source>
        <translation>&amp;Parcourir...</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="109"/>
        <source>A&amp;dd...</source>
        <translation>A&amp;jouter...</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="111"/>
        <source>&amp;Remove</source>
        <translation>&amp;Effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="135"/>
        <source>Additional &amp;Paths</source>
        <translation>&amp;Chemins additionnels</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="247"/>
        <source>Choose a Directory</source>
        <translation>Sélectionnez un dossier</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="51"/>
        <source>Embed in PostScript</source>
        <comment>font preview</comment>
        <translation type="obsolete">Incorporer dans le PostScript</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="130"/>
        <source>Font search paths can only be set in File &gt; Preferences, and only when there is no document currently open. Close any open documents, then use File &gt; Preferences &gt; Fonts to change the font search path.</source>
        <translation>Les chemins de recherche des polices ne peuvent être définis que dans le menu Fichier &gt; préférences et uniquement lorsqu&apos;aucun document n&apos;est ouvert. Fermez tous les documents ouverts, puis utilisez Fichier &gt; Préférences &gt; Polices pour modifier le chemin de recherche des polices.</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="57"/>
        <source>Use Font</source>
        <translation type="obsolete">Utiliser la police</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="58"/>
        <source>Embed in PostScript</source>
        <translation type="obsolete">Incorporer dans le PostScript</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="59"/>
        <source>Subset</source>
        <translation type="obsolete">Jeu partiel</translation>
    </message>
    <message>
        <location filename="../fontprefs.cpp" line="60"/>
        <source>Path to Font File</source>
        <translation type="obsolete">Chemin</translation>
    </message>
</context>
<context>
    <name>FontPreview</name>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="44"/>
        <source>Woven silk pyjamas exchanged for blue quartz</source>
        <comment>font preview</comment>
        <translation>à l&apos;île exiguë où l&apos;obèse jury mûr fête l&apos;haï volapük,
âne ex æquo au whist, ôtez ce vœu déçu
À L&apos;ÎLE EXIGUË OÙ L&apos;OBÈSE JURY MÛR FÊTE L&apos;HAÏ VOLAPÜK,
ÂNE EX ÆQUO AU WHIST, ÔTEZ CE VŒU DÉÇU</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="164"/>
        <source>Append selected font into Style, Font menu</source>
        <comment>font preview</comment>
        <translation type="obsolete">Ajouter la police sélectionnée dans le menu Style, Polices</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="111"/>
        <source>Leave preview</source>
        <comment>font preview</comment>
        <translation>Fermer la prévisualisation</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="165"/>
        <source>Typing the text here provides quick searching in the font names. Searching is case insensitive. You can provide a common wild cards (*, ?, [...]) in your phrase. Examples: t* will list all fonts starting with t or T. *bold* will list all fonts with word bold, bolder etc. in the name.</source>
        <translation type="obsolete">Saisissez ici le texte de recherche rapide dans les noms de polices. La recherche est insensible à la casse. Les jokers habituels (*,·?,·[...]) sont disponibles. Parexemple, t* listera toutes les polices dont le nom débute par t ou T; *bold* affichera les polices dont le nom contient bold, bolder, etc.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="114"/>
        <source>Start searching</source>
        <translation type="obsolete">Démarrer la recherche</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="113"/>
        <source>Size of the selected font</source>
        <translation>Corps de la police sélectionnée</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Sample will be shown after key release</source>
        <translation type="obsolete">L&apos;échantillon sera visible dès que la touche sera relâchée</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="97"/>
        <source>User</source>
        <comment>font preview</comment>
        <translation type="obsolete">Utilisateur</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="98"/>
        <source>System</source>
        <comment>font preview</comment>
        <translation type="obsolete">Système</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="42"/>
        <source>Font Name</source>
        <translation type="obsolete">Nom de la police</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="43"/>
        <source>Doc</source>
        <translation type="obsolete">Doc</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="44"/>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="45"/>
        <source>Subset</source>
        <translation type="obsolete">Jeu partiel</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="46"/>
        <source>Access</source>
        <translation type="obsolete">Accès</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="13"/>
        <source>Fonts Preview</source>
        <translation type="unfinished">Aperçu des polices disponibles</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="19"/>
        <source>&amp;Quick Search:</source>
        <translation type="unfinished">&amp;Recherche rapide :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
        <source>&amp;Search</source>
        <translation type="obsolete">Re&amp;chercher</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="38"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="80"/>
        <source>&amp;Font Size:</source>
        <translation type="unfinished">&amp;Corps :</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="103"/>
        <source>Text</source>
        <translation type="unfinished">Texte</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="113"/>
        <source>Sample text to display</source>
        <translation type="unfinished">Exemple de texte</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="123"/>
        <source>Se&amp;t</source>
        <translation type="unfinished">Ré&amp;gler</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="126"/>
        <source>Alt+T</source>
        <translation type="unfinished">Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="133"/>
        <source>Reset the text</source>
        <translation type="unfinished">Revenir aux réglages texte initiaux</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="209"/>
        <source>&amp;Append</source>
        <translation type="obsolete">A&amp;jouter</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="212"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="167"/>
        <source>&amp;Close</source>
        <translation type="unfinished">&amp;Fermer</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="170"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="112"/>
        <source>Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="136"/>
        <source>&amp;Default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
        <source>Show Extended Font Information</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="120"/>
        <source>Set the preview text</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontPreviewBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Fonts Preview</source>
        <translation type="obsolete">Aperçu des polices disponibles</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Quick Search:</source>
        <translation type="obsolete">&amp;Recherche rapide :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Search</source>
        <translation type="obsolete">Re&amp;chercher</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Font Name</source>
        <translation type="obsolete">Nom de la police</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Doc</source>
        <translation type="obsolete">Doc</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Subset</source>
        <translation type="obsolete">Jeu partiel</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Access</source>
        <translation type="obsolete">Accès</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Font Size:</source>
        <translation type="obsolete">&amp;Corps :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Text</source>
        <translation type="obsolete">Texte</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Sample text to display</source>
        <translation type="obsolete">Exemple de texte</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Se&amp;t</source>
        <translation type="obsolete">Ré&amp;gler</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+T</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Reset the text</source>
        <translation type="obsolete">Revenir aux réglages texte initiaux</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Append</source>
        <translation type="obsolete">A&amp;jouter</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Fermer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>FontPreviewPlugin</name>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="49"/>
        <source>&amp;Font Preview...</source>
        <translation>Aperçu des &amp;polices disponibles...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="66"/>
        <source>Font Preview dialog</source>
        <translation>Dialogue d&apos;aperçu des polices disponibles</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="67"/>
        <source>Sorting, searching and browsing available fonts.</source>
        <translation>Rechercher et trier les polices disponibles.</translation>
    </message>
</context>
<context>
    <name>FontReplaceDialog</name>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="30"/>
        <source>Font Substitution</source>
        <translation>Substitutions de polices</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="40"/>
        <source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
        <translation>Ce document utilise des polices qui ne sont pas installées sur votre système. Veuillez leur choisir des polices de substitution. Annuler stoppera le chargement du document.</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="45"/>
        <source>Original Font</source>
        <translation>Police d&apos;origine</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="46"/>
        <source>Substitution Font</source>
        <translation>Police de substitution</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="72"/>
        <source>Make these substitutions permanent</source>
        <translation>Rendre ces substitutions permanentes</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="83"/>
        <source>Cancels these font substitutions and stops loading the document.</source>
        <translation>Annule ces substitutions de polices et arrête le chargement du document</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="84"/>
        <source>Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit &gt; Preferences &gt; Fonts.</source>
        <translation>Activer ceci force Scribus à utiliser ces polices-ci en remplacement permanent des polices manquantes dans tout nouveau document. Ce réglage peut être modifié dans Édition &gt; Préférences &gt; Polices.</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="85"/>
        <source>If you select OK, then save, these substitutions are made permanent in the document.</source>
        <translation>Si vous sélectionnez OK, puis sauvegardez, ces substitutions seront rendues permanentes dans le document.</translation>
    </message>
</context>
<context>
    <name>GradientEditor</name>
    <message>
        <location filename="../../scribus/gradienteditor.cpp" line="327"/>
        <source>Position:</source>
        <translation>Position :</translation>
    </message>
    <message>
        <location filename="../../scribus/gradienteditor.cpp" line="328"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/gradienteditor.cpp" line="336"/>
        <source>Add, change or remove color stops here</source>
        <translation>Ajoutez, modifiez ou supprimez les points de contrôle de couleur ici</translation>
    </message>
</context>
<context>
    <name>GradientVectorDialog</name>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="100"/>
        <source>Gradient Vector</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManager</name>
    <message>
        <location filename="../guidemanager.cpp" line="229"/>
        <source>Edit Guide</source>
        <translation type="obsolete">Modifier le repère</translation>
    </message>
    <message>
        <location filename="../guidemanager.cpp" line="257"/>
        <source>Enter a position:</source>
        <translation type="obsolete">Entrer une position :</translation>
    </message>
    <message>
        <location filename="../guidemanager.cpp" line="256"/>
        <source>New Guide</source>
        <translation type="obsolete">Nouveau repère</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="31"/>
        <source>&amp;Single</source>
        <translation type="unfinished">&amp;Simple</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="146"/>
        <source>Horizontals</source>
        <translation type="unfinished">Horizontaux</translation>
    </message>
    <message>
        <location filename="../guidemanager.ui" line="99"/>
        <source>Guide</source>
        <translation type="obsolete">Repère</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="55"/>
        <source>&amp;Add</source>
        <translation type="unfinished">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="356"/>
        <source>Alt+A</source>
        <translation type="unfinished">Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="65"/>
        <source>D&amp;elete</source>
        <translation type="unfinished">&amp;Supprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="307"/>
        <source>Alt+E</source>
        <translation type="unfinished">Alt+E</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="233"/>
        <source>Verticals</source>
        <translation type="unfinished">Verticaux</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="94"/>
        <source>A&amp;dd</source>
        <translation type="unfinished">Ajout&amp;er</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="97"/>
        <source>Alt+D</source>
        <translation type="unfinished">Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="104"/>
        <source>De&amp;lete</source>
        <translation type="unfinished">Su&amp;pprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="122"/>
        <source>Alt+L</source>
        <translation type="unfinished">Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="119"/>
        <source>&amp;Lock Guides</source>
        <translation type="unfinished">&amp;Repères fixes</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="320"/>
        <source>Appl&amp;y to All Pages</source>
        <translation type="unfinished">Appli&amp;quer à toutes les pages</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="323"/>
        <source>Alt+Y</source>
        <translation type="unfinished">Alt+Y</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="140"/>
        <source>&amp;Column/Row</source>
        <translation type="unfinished">&amp;Colonne/ligne</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="152"/>
        <source>&amp;Number:</source>
        <translation type="unfinished">&amp;Nombre :</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="175"/>
        <source>U&amp;se Gap:</source>
        <translation type="unfinished">Gouttièr&amp;e :</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="178"/>
        <source>Alt+S</source>
        <translation type="unfinished">Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="275"/>
        <source>Refer To</source>
        <translation type="unfinished">En référence à</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="281"/>
        <source>&amp;Page</source>
        <translation type="unfinished">&amp;Page</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="343"/>
        <source>Alt+P</source>
        <translation type="unfinished">Alt+P</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="294"/>
        <source>M&amp;argins</source>
        <translation type="unfinished">M&amp;arges</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="304"/>
        <source>S&amp;election</source>
        <translation type="unfinished">Sél&amp;ection</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="239"/>
        <source>Nu&amp;mber:</source>
        <translation type="unfinished">No&amp;mbre :</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="262"/>
        <source>Use &amp;Gap:</source>
        <translation type="unfinished">&amp;Gouttière :</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="265"/>
        <source>Alt+G</source>
        <translation type="unfinished">Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="331"/>
        <source>&amp;Misc</source>
        <translation type="unfinished">Di&amp;vers</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="337"/>
        <source>Delete all guides from the current page</source>
        <translation type="unfinished">Supprimer tous les repères de la page courante</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="340"/>
        <source>Delete Guides from Current &amp;Page</source>
        <translation type="unfinished">Supprimer les repères de la &amp;page </translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="350"/>
        <source>Delete all guides from the current document</source>
        <translation type="unfinished">Supprimer tous les repères du document courant</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="353"/>
        <source>Delete Guides from &amp;All Pages</source>
        <translation type="unfinished">Supprimer les repères de toutes les p&amp;ages</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="15"/>
        <source>Guide Manager</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="253"/>
        <source>Add a new horizontal guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="254"/>
        <source>Delete the selected horizontal guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="255"/>
        <source>Add a new vertical guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="256"/>
        <source>Delete the selected vertical guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="257"/>
        <source>Lock the guides</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="258"/>
        <source>Apply to all pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="259"/>
        <source>Number of horizontal guides to create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="260"/>
        <source>Number of vertical guides to create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="261"/>
        <source>Create rows with guides, with an additional gap between the rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="262"/>
        <source>Create columns with guides, with an additional gap between the columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="263"/>
        <source>Create the selected number of horizontal guides relative to the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="264"/>
        <source>Create the selected number of horizontal guides relative to the current page&apos;s margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="265"/>
        <source>Create the selected number of horizontal guides relative to the current selection of items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="266"/>
        <source>Create the selected number of vertical guides relative to the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="267"/>
        <source>Create the selected number of vertical guides relative to the current page&apos;s margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="268"/>
        <source>Create the selected number of vertical guides relative to the current selection of items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="269"/>
        <source>Apply the shown guides to all pages in the document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="270"/>
        <source>Delete all guides shown on the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="271"/>
        <source>Delete all guides from all pages</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManagerBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Manage Guides</source>
        <translation type="obsolete">Gestion des repères</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Horizontals</source>
        <translation type="obsolete">Horizontaux</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Guide</source>
        <translation type="obsolete">Repère</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Add</source>
        <translation type="obsolete">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>D&amp;elete</source>
        <translation type="obsolete">&amp;Supprimer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+E</source>
        <translation type="obsolete">Alt+E</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Verticals</source>
        <translation type="obsolete">Verticaux</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>A&amp;dd</source>
        <translation type="obsolete">Ajout&amp;er</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>De&amp;lete</source>
        <translation type="obsolete">Su&amp;pprimer</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Lock Guides</source>
        <translation type="obsolete">&amp;Repères fixes</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Appl&amp;y to All Pages</source>
        <translation type="obsolete">Appli&amp;quer à toutes les pages</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+Y</source>
        <translation type="obsolete">Alt+Y</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Number:</source>
        <translation type="obsolete">&amp;Nombre :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>U&amp;se Gap:</source>
        <translation type="obsolete">Gouttièr&amp;e :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Nu&amp;mber:</source>
        <translation type="obsolete">No&amp;mbre :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Use &amp;Gap:</source>
        <translation type="obsolete">&amp;Gouttière :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+G</source>
        <translation type="obsolete">Alt+G</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Refer To</source>
        <translation type="obsolete">En référence à</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Page</source>
        <translation type="obsolete">&amp;Page</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+P</source>
        <translation type="obsolete">Alt+P</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>M&amp;argins</source>
        <translation type="obsolete">M&amp;arges</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>S&amp;election</source>
        <translation type="obsolete">Sél&amp;ection</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Misc</source>
        <translation type="obsolete">Di&amp;vers</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Delete all guides from the current page</source>
        <translation type="obsolete">Supprimer tous les repères de la page courante</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Delete all guides from the current document</source>
        <translation type="obsolete">Supprimer tous les repères du document courant</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Single</source>
        <translation type="obsolete">&amp;Simple</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Column/Row</source>
        <translation type="obsolete">&amp;Colonne/ligne</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Delete Guides from Current &amp;Page</source>
        <translation type="obsolete">Supprimer les repères de la &amp;page </translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Delete Guides from &amp;All Pages</source>
        <translation type="obsolete">Supprimer les repères de toutes les p&amp;ages</translation>
    </message>
</context>
<context>
    <name>HelpBrowser</name>
    <message>
        <location filename="../helpbrowser.cpp" line="457"/>
        <source>Contents</source>
        <translation type="obsolete">Contenu</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="343"/>
        <source>Link</source>
        <translation type="obsolete">Lien</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="31"/>
        <source>&amp;Contents</source>
        <translation>&amp;Contenu</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="60"/>
        <source>&amp;Search</source>
        <translation>Re&amp;chercher</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="325"/>
        <source>Relevance</source>
        <translation type="obsolete">Pertinence</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="45"/>
        <source>Se&amp;arch</source>
        <translation>R&amp;echercher</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="96"/>
        <source>&amp;New</source>
        <translation>&amp;Nouveau</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="178"/>
        <source>&amp;Delete</source>
        <translation>S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="355"/>
        <source>De&amp;lete All</source>
        <translation type="obsolete">&amp;Tout effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="79"/>
        <source>Book&amp;marks</source>
        <translation>Si&amp;gnets</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="148"/>
        <source>&amp;Print...</source>
        <translation>Im&amp;primer...</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="216"/>
        <source>E&amp;xit</source>
        <translation type="obsolete">&amp;Quitter</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="289"/>
        <source>&amp;File</source>
        <translation>&amp;Fichier</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="158"/>
        <source>&amp;Find...</source>
        <translation>&amp;Chercher...</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="296"/>
        <source>Find &amp;Next</source>
        <translation>Trouver le suiva&amp;nt</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="297"/>
        <source>Find &amp;Previous</source>
        <translation>Trouver le &amp;précédent</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="290"/>
        <source>&amp;Edit</source>
        <translation>É&amp;dition</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="298"/>
        <source>&amp;Add Bookmark</source>
        <translation>&amp;Ajouter un signet</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="183"/>
        <source>D&amp;elete All</source>
        <translation>Tout &amp;effacer</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="291"/>
        <source>&amp;Bookmarks</source>
        <translation>&amp;Signets</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="287"/>
        <source>Scribus Online Help</source>
        <translation>Aide en ligne</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="461"/>
        <source>Searching is case unsensitive</source>
        <translation type="obsolete">La recherche est indépendante de la casse</translation>
    </message>
    <message>
        <location filename="../helpbrowser.cpp" line="265"/>
        <source>Sorry, no manual available! Please see: http://docs.scribus.net for updated docs
and www.scribus.net for downloads.</source>
        <translation type="obsolete">Le manuel n&apos;est pas installé. Allez sur le site http://docs.scribus.net pour le télécharger.</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="377"/>
        <source>Find</source>
        <translation>Rechercher</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="377"/>
        <source>Search Term:</source>
        <translation>Rechercher :</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="409"/>
        <source>New Bookmark</source>
        <translation>Nouveau signet</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="409"/>
        <source>New Bookmark&apos;s Title:</source>
        <translation>Titre du nouveau signet :</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="137"/>
        <source>Scribus Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="53"/>
        <source>Searching is case insensitive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="86"/>
        <source>1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="153"/>
        <source>&amp;Exit</source>
        <translation type="unfinished">&amp;Quitter</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="163"/>
        <source>Find &amp;Next...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="168"/>
        <source>Find &amp;Previous...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="173"/>
        <source>&amp;Add</source>
        <translation type="unfinished">Ajo&amp;uter</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="294"/>
        <source>&amp;Quit</source>
        <translation type="unfinished">&amp;Quitter</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="715"/>
        <source>&lt;h2&gt;&lt;p&gt;Sorry, no manual is installed!&lt;/p&gt;&lt;p&gt;Please see:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net for updated documentation&lt;/li&gt;&lt;li&gt;http://www.scribus.net for downloads&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</source>
        <comment>HTML message for no documentation available to show</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HelpBrowser2</name>
    <message>
        <location filename="../ui/hb2.ui" line="30"/>
        <source>&amp;Contents</source>
        <translation type="obsolete">&amp;Contenu</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="49"/>
        <source>Se&amp;arch</source>
        <translation type="obsolete">R&amp;echercher</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="64"/>
        <source>&amp;Search</source>
        <translation type="obsolete">Re&amp;chercher</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="77"/>
        <source>Book&amp;marks</source>
        <translation type="obsolete">Si&amp;gnets</translation>
    </message>
</context>
<context>
    <name>HyAsk</name>
    <message>
        <location filename="../../scribus/hyask.cpp" line="48"/>
        <source>Possible Hyphenation</source>
        <translation>Césure possible</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="68"/>
        <source>Accept</source>
        <translation>Approuver</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="89"/>
        <source>Skip</source>
        <translation>Sauter</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="107"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="77"/>
        <source>Add to the
Exception List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="97"/>
        <source>Add to the
Ignore List</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HySettings</name>
    <message>
        <location filename="../hysettings.cpp" line="20"/>
        <source>&amp;Hyphenation Suggestions</source>
        <translation type="obsolete">Suggestions de &amp;césure</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="23"/>
        <source>Hyphenate Text Automatically &amp;During Typing</source>
        <translation type="obsolete">Insère les césures automatiquement pen&amp;dant la saisie</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="40"/>
        <source>&amp;Language:</source>
        <translation type="obsolete">&amp;Langue :</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="46"/>
        <source>&amp;Smallest Word:</source>
        <translation type="obsolete">Mot le plus &amp;court :</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="52"/>
        <source>Consecutive Hyphenations &amp;Allowed:</source>
        <translation type="obsolete">Césures consécutives &amp;autorisées :</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="56"/>
        <source>A dialog box showing all possible hyphens for each word will show up when you use the Extras, Hyphenate Text option.</source>
        <translation type="obsolete">Une boîte de dialogue affichant toutes les césures possibles apparaîtra pour chaque mot lorsque vous déciderez d&apos;effectuer les césures.</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="57"/>
        <source>Enables automatic hyphenation of your text while typing.</source>
        <translation type="obsolete">Effectue automatiquement les césures en cours de saisie.</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="58"/>
        <source>Length of the smallest word to be hyphenated.</source>
        <translation type="obsolete">Minimum de lettres qu&apos;un mot doit contenir pour être coupé.</translation>
    </message>
    <message>
        <location filename="../hysettings.cpp" line="59"/>
        <source>Maximum number of Hyphenations following each other.
A value of 0 means unlimited hyphenations.</source>
        <translation type="obsolete">Nombre maximum de césures consécutives. Une valeur
de 0 permet un nombre illimité de césures.</translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="92"/>
        <source>Ignore List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="121"/>
        <source>Add a new Entry</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="133"/>
        <source>Edit Entry</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="133"/>
        <source>Exception List</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImageInfoDialog</name>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="23"/>
        <source>Image Info</source>
        <translation>Informations sur l&apos;image</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="30"/>
        <source>General Info</source>
        <translation>Informations générales</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="34"/>
        <source>Date / Time:</source>
        <translation>Date / heure :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="38"/>
        <source>Has Embedded Profile:</source>
        <translation>Possède le profil : </translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="46"/>
        <source>Profile Name:</source>
        <translation>Nom du profil :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="50"/>
        <source>Has Embedded Paths:</source>
        <translation>Possède un tracé de détourage incorporé</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="58"/>
        <source>Has Layers:</source>
        <translation>Possède les calques :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="69"/>
        <source>EXIF Info</source>
        <translation>Informations EXIF</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="84"/>
        <source>Artist:</source>
        <translation>Artiste :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="126"/>
        <source>Comment:</source>
        <translation>Commentaire :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="127"/>
        <source>User Comment:</source>
        <translation>Commentaire utilisateur :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="128"/>
        <source>Camera Model:</source>
        <translation>Modèle d&apos;appareil photo :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="129"/>
        <source>Camera Manufacturer:</source>
        <translation>Fabricant de l&apos;APN :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="135"/>
        <source>Description:</source>
        <translation>Description :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="136"/>
        <source>Copyright:</source>
        <translation>Copyright :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="137"/>
        <source>Scanner Model:</source>
        <translation>Modèle de scanner :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="138"/>
        <source>Scanner Manufacturer:</source>
        <translation>Fabricant du scanner :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="130"/>
        <source>Exposure time</source>
        <translation>Temps d&apos;exposition</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="131"/>
        <source>Aperture:</source>
        <translation>Ouverture :</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="132"/>
        <source>ISO equiv.:</source>
        <translation>equiv. ISO :</translation>
    </message>
</context>
<context>
    <name>ImportAIPlugin</name>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="58"/>
        <source>Import AI...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="79"/>
        <source>Imports Illustrator Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="80"/>
        <source>Imports most Illustrator files into the current document,
converting their vector data into Scribus objects.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="162"/>
        <source>The file could not be imported</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImportDialog</name>
    <message>
        <location filename="../smstyleimport.cpp" line="30"/>
        <source>Choose Styles</source>
        <translation type="obsolete">Choisir les styles</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="35"/>
        <source>Available Styles</source>
        <translation type="obsolete">Styles disponibles</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="40"/>
        <source>Character Styles</source>
        <translation type="obsolete">Styles de caractères</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="49"/>
        <source>Paragraph Styles</source>
        <translation type="obsolete">Styles de paragraphes</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="58"/>
        <source>Line Styles</source>
        <translation type="obsolete">Styles de filets</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="76"/>
        <source>In case of a name clash</source>
        <translation type="obsolete">En cas de conflit de nom</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="77"/>
        <source>Rename imported style</source>
        <translation type="obsolete">Renommer le style importé</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="79"/>
        <source>Replace existing style</source>
        <translation type="obsolete">Remplacer le style existant</translation>
    </message>
</context>
<context>
    <name>ImportPSPlugin</name>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="57"/>
        <source>Import &amp;EPS/PS...</source>
        <translation type="obsolete">Importer un fichier (&amp;E)PS...</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="78"/>
        <source>Imports EPS Files</source>
        <translation type="obsolete">Importe des fichiers EPS</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="79"/>
        <source>Imports most EPS files into the current document,
converting their vector data into Scribus objects.</source>
        <translation type="obsolete">Importe la plupart des fichiers EPS dans le document courant,
convertissant les données vectorielles en objets Scribus.</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="92"/>
        <source>PostScript</source>
        <translation type="obsolete">PostScript</translation>
    </message>
    <message>
        <location filename="../plugins/psimport/importpsplugin.cpp" line="105"/>
        <source>PDF</source>
        <translation type="obsolete">PDF</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importpsplugin.cpp" line="57"/>
        <source>Import PostScript...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importpsplugin.cpp" line="78"/>
        <source>Imports PostScript Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importpsplugin.cpp" line="79"/>
        <source>Imports most PostScript files into the current document,
converting their vector data into Scribus objects.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImportXfigPlugin</name>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="58"/>
        <source>Import Xfig...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="79"/>
        <source>Imports Xfig Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="80"/>
        <source>Imports most Xfig files into the current document,
converting their vector data into Scribus objects.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="128"/>
        <source>All Supported Formats</source>
        <translation type="unfinished">Tous les formats pris en charge</translation>
    </message>
</context>
<context>
    <name>Imposition</name>
    <message>
        <location filename="../../scribus/plugins/imposition/imposition.cpp" line="72"/>
        <source>Portrait</source>
        <translation type="unfinished">Portrait (à la française)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/imposition.cpp" line="73"/>
        <source>Landscape</source>
        <translation type="unfinished">Paysage (à l&apos;italienne)</translation>
    </message>
</context>
<context>
    <name>ImpositionBase</name>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="19"/>
        <source>Imposition</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="44"/>
        <source>Gri&amp;d</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="102"/>
        <source>Copies</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="157"/>
        <source>Do&amp;uble sided</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="160"/>
        <source>Alt+U</source>
        <translation type="unfinished">Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="186"/>
        <source>Front side</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="218"/>
        <source>Back side</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="253"/>
        <source>&amp;Booklet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="285"/>
        <source>Pages per sheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="296"/>
        <source>4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="301"/>
        <source>8</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="306"/>
        <source>16</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="318"/>
        <source>Pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="325"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="339"/>
        <source>Fold</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="349"/>
        <source>Front page from</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="376"/>
        <source>Double sided</source>
        <translation type="unfinished">Pages en regard</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="387"/>
        <source>Back page from</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="415"/>
        <source>Destination page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="455"/>
        <source>Size</source>
        <translation type="unfinished">Corps</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="487"/>
        <source>Orientation</source>
        <translation type="unfinished">Orientation</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="519"/>
        <source>Width</source>
        <translation type="unfinished">Largeur</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="564"/>
        <source>Height</source>
        <translation type="unfinished">Hauteur</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="620"/>
        <source>Preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="627"/>
        <source>Refresh preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="671"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="674"/>
        <source>Alt+G</source>
        <translation type="unfinished">Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="681"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="684"/>
        <source>Alt+C</source>
        <translation type="unfinished">Alt+C</translation>
    </message>
</context>
<context>
    <name>ImpositionPlugin</name>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionplugin.cpp" line="37"/>
        <source>&amp;Imposition...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionplugin.cpp" line="69"/>
        <source>Imposition dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionplugin.cpp" line="70"/>
        <source>Imposition on grids, booklets and folds</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InsPage</name>
    <message>
        <location filename="../../scribus/inspage.cpp" line="30"/>
        <source>Insert Page</source>
        <translation>Insérer une(des) page(s)</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="63"/>
        <source>&amp;Insert</source>
        <translation>&amp;Insérer</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="46"/>
        <source>Page(s)</source>
        <translation>page(s)</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="50"/>
        <source>before Page</source>
        <translation>avant la page</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="51"/>
        <source>after Page</source>
        <translation>après la page</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="52"/>
        <source>at End</source>
        <translation>à la fin</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="67"/>
        <source>Master Pages</source>
        <translation>Gabarits</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="77"/>
        <source>&amp;Master Page:</source>
        <translation>&amp;Gabarit :</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="205"/>
        <source>Page Size</source>
        <translation>Format de la page</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="209"/>
        <source>&amp;Size:</source>
        <translation>&amp;Taille :</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="224"/>
        <source>Orie&amp;ntation:</source>
        <translation>Orie&amp;ntation :</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="227"/>
        <source>Portrait</source>
        <translation>Portrait (à la française)</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="228"/>
        <source>Landscape</source>
        <translation>Paysage (à l&apos;italienne)</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="233"/>
        <source>&amp;Width:</source>
        <translation>&amp;Largeur :</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="240"/>
        <source>&amp;Height:</source>
        <translation>&amp;Hauteur :</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="245"/>
        <source>Move Objects with their Page</source>
        <translation>Déplacer les objets avec leur page</translation>
    </message>
</context>
<context>
    <name>InsertAFrame</name>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="237"/>
        <source>Open</source>
        <translation>Ouvrir</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="115"/>
        <source>&lt;b&gt;Insert a text frame&lt;/b&gt;&lt;br/&gt;A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable format from plain text to OpenOffice.org.&lt;br/&gt;Your text may be edited and formatted on the page directly or in the simple Story Editor.</source>
        <translation type="obsolete">&lt;b&gt;Insère un cadre de texte&lt;/b&gt;&lt;br/&gt;Un cadre de texte vous permet d&apos;insérer un texte à un endroit défini avec le format qui vous convient. Il est possible de choisir un fichier texte depuis l&apos;onglet Options pour importer celui-ci dans le cadre de texte. Scribus supporte un large choix de formats de fichiers texte, du texte simple à OpenOffice.org.&lt;br/&gt;Le texte peut être édité et formaté directement sur la page ou via l&apos;éditeur de texte.</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="119"/>
        <source>&lt;b&gt;Insert an image frame&lt;/b&gt;&lt;br/&gt;An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette.</source>
        <translation type="obsolete">&lt;b&gt;Insère un cadre d&apos;image&lt;/b&gt;&lt;br/&gt;Un cadre d&apos;image permet de placer une image sur la page. Différents effets peuvent être appliqués et combinés, y compris la transparence, la luminosité, ou la postérisation permettant la retouche ou la création d&apos;effets visuels. La mise à l&apos;échelle de l&apos;image ou la modification de ses contours se fait depuis la palette de propriétés.</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="13"/>
        <source>Insert A Frame</source>
        <translation type="unfinished">Insérer un cadre</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="37"/>
        <source>T&amp;ype</source>
        <translation type="unfinished">T&amp;ype</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="75"/>
        <source>&amp;Text Frame</source>
        <translation type="unfinished">Cadre de &amp;texte</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="73"/>
        <source>Alt+T</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="85"/>
        <source>&amp;Image Frame</source>
        <translation type="unfinished">Cadre d&apos;&amp;image</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="83"/>
        <source>Alt+I</source>
        <translation type="obsolete">Alt+I</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="93"/>
        <source>T&amp;able</source>
        <translation type="obsolete">T&amp;ableau</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="96"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="106"/>
        <source>Shape</source>
        <translation type="obsolete">Forme</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="116"/>
        <source>Polygon</source>
        <translation type="obsolete">Polygone</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="122"/>
        <source>&amp;Location</source>
        <translation type="unfinished">Emp&amp;lacement</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="137"/>
        <source>Page Placement</source>
        <translation type="unfinished">Placement de la page</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="195"/>
        <source>Selecting this will place the frame only on the current page.</source>
        <translation type="obsolete">Si activé, le cadre ne sera placé que sur la page courante.</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="152"/>
        <source>Current Page</source>
        <translation type="unfinished">Page courante</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="162"/>
        <source>All Pages</source>
        <translation type="unfinished">Toutes les pages</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="205"/>
        <source>Selecting this will place frame on the selected range. </source>
        <translation type="obsolete">Si activé, le cadre sera placé sur les pages de l&apos;intervalle</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="208"/>
        <source>Range of Pages:</source>
        <translation type="obsolete">Intervalle de pages :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="773"/>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="225"/>
        <source>Position of Frame</source>
        <translation type="unfinished">Position du cadre</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="310"/>
        <source>Selecting this places the frame in the upper left of the page margins defined in your doc setup.</source>
        <translation type="obsolete">Positionne le cadre en haut à gauche à la limite des marges définies dans les propriétés du document.</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="240"/>
        <source>Top Left of Margins</source>
        <translation type="unfinished">En haut à gauche des marges</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="320"/>
        <source>Selecting this puts the frame on the top left with postion 0,0</source>
        <translation type="obsolete">Positionne le cadre en haut à gauche à la position 0,0</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="250"/>
        <source>Top Left of Page</source>
        <translation type="unfinished">En haut à gauche de la page</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="330"/>
        <source>Selecting this places the frame in the upper left of the page bleed defined in your doc setup.</source>
        <translation type="obsolete">Positionne le cadre en haut à gauche des limites du fond perdu tel que défini dans les préférences de votre document.</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="260"/>
        <source>Top Left of Bleed</source>
        <translation type="unfinished">En haut à gauche du fond perdu</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="340"/>
        <source>Set the dimensions wished below in the X: Y: dialog below.</source>
        <translation type="obsolete">Réglez es dimensions dans le dialogue X: Y: ci-dessous.</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="343"/>
        <source>Custom Position:</source>
        <translation type="obsolete">Position personnalisée :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="316"/>
        <source>X:</source>
        <translation type="unfinished">X :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="309"/>
        <source>Y:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="379"/>
        <source>&amp;Size</source>
        <translation type="unfinished">&amp;Corps</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="409"/>
        <source>Same as the Page Margins</source>
        <translation type="unfinished">Identique aux marges de la page</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="419"/>
        <source>Same as the Page</source>
        <translation type="unfinished">Identique à la page</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="429"/>
        <source>Same as the Bleed</source>
        <translation type="unfinished">Identique au fond perdu</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="439"/>
        <source>Same as the Imported Image</source>
        <translation type="unfinished">Identique à l&apos;image importée</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="539"/>
        <source>Custom Size:</source>
        <translation type="obsolete">Taille personnalisée :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="488"/>
        <source>Height:</source>
        <translation type="unfinished">Hauteur :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="495"/>
        <source>Width:</source>
        <translation type="unfinished">Largeur :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="558"/>
        <source>&amp;Options</source>
        <translation type="unfinished">&amp;Options</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="759"/>
        <source>Source Image:</source>
        <translation type="unfinished">Image source :</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="914"/>
        <source>&amp;Select File...</source>
        <translation type="obsolete">Fichier &amp;source...</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="917"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="813"/>
        <source>There are no options for this type of frame</source>
        <translation type="unfinished">Ce type de cadre ne possède pas d&apos;options</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="625"/>
        <source>Columns:</source>
        <translation type="unfinished">Colonnes :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="611"/>
        <source>Gap:</source>
        <translation type="unfinished">Gouttière :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="531"/>
        <source>Link Created Frames</source>
        <translation type="obsolete">Lier les cadres créés</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="697"/>
        <source>Source Document:</source>
        <translation type="unfinished">Document source :</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="974"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <location filename="../insertaframe.ui" line="990"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="172"/>
        <source>Range of Pages</source>
        <translation type="unfinished">Intervalle de pages</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="270"/>
        <source>Custom Position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="449"/>
        <source>Custom Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="133"/>
        <source>&lt;b&gt;Insert a text frame&lt;/b&gt;&lt;br/&gt;A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.&lt;br/&gt;Your text may be edited and formatted on the page directly or in the Story Editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="137"/>
        <source>&lt;b&gt;Insert an image frame&lt;/b&gt;&lt;br/&gt;An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="72"/>
        <source>Insert one or more text frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="82"/>
        <source>Insert one or more image frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="134"/>
        <source>Place the new frames on the current page, on all pages or on a selected range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="149"/>
        <source>Insert the frame on the current page only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="159"/>
        <source>Insert one frame for each existing page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="169"/>
        <source>Insert frames on a range of pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="187"/>
        <source>Range of pages to insert frames on</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="222"/>
        <source>Position the new frame in relation to the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="237"/>
        <source>Insert the frame at the top left of the page margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="247"/>
        <source>Insert the frame at the top left of the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="257"/>
        <source>Insert the frame at the top left of the page bleed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="267"/>
        <source>Insert the frame at a custom position on the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="323"/>
        <source>Top position of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="330"/>
        <source>Left position of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="406"/>
        <source>Insert the new frame with the same dimensions as the page margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="416"/>
        <source>Insert the new frame with the same dimensions as the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="426"/>
        <source>Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="436"/>
        <source>Insert the new frame with the same dimensions as the image that will be imported</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="446"/>
        <source>Insert the new frame with a custom size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="502"/>
        <source>Width of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="509"/>
        <source>Height of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="601"/>
        <source>Number of columns for the inserted text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="618"/>
        <source>Distance between the columns in the text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="649"/>
        <source>Link the inserted text frames together to form a chain of frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="652"/>
        <source>Link Inserted Frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="661"/>
        <source>Link the first inserted frame to a preexisting text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="664"/>
        <source>Link to Existing Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="680"/>
        <source>Name of existing text frame to link to</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="704"/>
        <source>Source document to load into the text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="766"/>
        <source>Source image to load into the inserted image frame</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InsertAFrameBase</name>
    <message>
        <location filename="" line="136953768"/>
        <source>Insert A Frame</source>
        <translation type="obsolete">Insérer un cadre</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>T&amp;ype</source>
        <translation type="obsolete">T&amp;ype</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Text Frame</source>
        <translation type="obsolete">Cadre de &amp;texte</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+T</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Image Frame</source>
        <translation type="obsolete">Cadre d&apos;&amp;image</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+I</source>
        <translation type="obsolete">Alt+I</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>T&amp;able</source>
        <translation type="obsolete">T&amp;ableau</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Shape</source>
        <translation type="obsolete">Forme</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Polygon</source>
        <translation type="obsolete">Polygone</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Location</source>
        <translation type="obsolete">Emp&amp;lacement</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Page Placement</source>
        <translation type="obsolete">Placement de la page</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Current Page</source>
        <translation type="obsolete">Page courante</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Selecting this will place the frame only on the current page.</source>
        <translation type="obsolete">Si activé, le cadre ne sera placé que sur la page courante.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Range of Pages:</source>
        <translation type="obsolete">Intervalle de pages :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Selecting this will place frame on the selected range. </source>
        <translation type="obsolete">Si activé, le cadre sera placé sur les pages de l&apos;intervalle</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Position of Frame</source>
        <translation type="obsolete">Position du cadre</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Top Left of Page</source>
        <translation type="obsolete">En haut à gauche de la page</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Selecting this puts the frame on the top left with postion 0,0</source>
        <translation type="obsolete">Positionne le cadre en haut à gauche à la position 0,0</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Top Left of Margins</source>
        <translation type="obsolete">En haut à gauche des marges</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Selecting this places the frame in the upper left of the page margins defined in your doc setup.</source>
        <translation type="obsolete">Positionne le cadre en haut à gauche à la limite des marges définies dans les propriétés du document.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Custom Position:</source>
        <translation type="obsolete">Position personnalisée :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Set the dimensions wished below in the X: Y: dialog below.</source>
        <translation type="obsolete">Réglez es dimensions dans le dialogue X: Y: ci-dessous.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>X:</source>
        <translation type="obsolete">X :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Y:</source>
        <translation type="obsolete">Y :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Size</source>
        <translation type="obsolete">&amp;Corps</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Same as the Page</source>
        <translation type="obsolete">Identique à la page</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Same as the Page Margins</source>
        <translation type="obsolete">Identique aux marges de la page</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Custom Size:</source>
        <translation type="obsolete">Taille personnalisée :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Height:</source>
        <translation type="obsolete">Hauteur :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Width:</source>
        <translation type="obsolete">Largeur :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Options</source>
        <translation type="obsolete">&amp;Options</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Source Image:</source>
        <translation type="obsolete">Image source :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Select File...</source>
        <translation type="obsolete">Fichier &amp;source...</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>There are no options for this type of frame</source>
        <translation type="obsolete">Ce type de cadre ne possède pas d&apos;options</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Source Document:</source>
        <translation type="obsolete">Document source :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Columns:</source>
        <translation type="obsolete">Colonnes :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Gap:</source>
        <translation type="obsolete">Gouttière :</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Link Created Frames</source>
        <translation type="obsolete">Lier les cadres créés</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>All Pages</source>
        <translation type="obsolete">Toutes les pages</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>...</source>
        <translation type="obsolete">...</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Top Left of Bleed</source>
        <translation type="obsolete">En haut à gauche du fond perdu</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Selecting this places the frame in the upper left of the page bleed defined in your doc setup.</source>
        <translation type="obsolete">Positionne le cadre en haut à gauche des limites du fond perdu tel que défini dans les préférences de votre document.</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Same as the Bleed</source>
        <translation type="obsolete">Identique au fond perdu</translation>
    </message>
    <message>
        <location filename="" line="136953768"/>
        <source>Same as the Imported Image</source>
        <translation type="obsolete">Identique à l&apos;image importée</translation>
    </message>
</context>
<context>
    <name>InsertTable</name>
    <message>
        <location filename="../../scribus/insertTable.cpp" line="15"/>
        <source>Insert Table</source>
        <translation>Insérer un tableau</translation>
    </message>
    <message>
        <location filename="../../scribus/insertTable.cpp" line="28"/>
        <source>Number of rows:</source>
        <translation>Nombre de lignes :</translation>
    </message>
    <message>
        <location filename="../../scribus/insertTable.cpp" line="29"/>
        <source>Number of columns:</source>
        <translation>Nombre de colonnes :</translation>
    </message>
</context>
<context>
    <name>JavaDocs</name>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="27"/>
        <source>Edit JavaScripts</source>
        <translation>Modifier les JavaScripts</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="46"/>
        <source>&amp;Edit...</source>
        <translation>&amp;Modifier...</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="49"/>
        <source>&amp;Add...</source>
        <translation>A&amp;jouter...</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="52"/>
        <source>&amp;Delete</source>
        <translation>S&amp;upprimer</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="57"/>
        <source>&amp;Close</source>
        <translation>&amp;Fermer</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="71"/>
        <source>Adds a new Script, predefines a function with the same name. If you want to use this script as an &quot;Open Action&quot; script be sure not to change the name of the function.</source>
        <translation>Ajoute un nouveau script et définit une fonction du même nom. Si vous souhaitez utiliser ce script comme &quot;action d&apos;ouverture&quot;, assurez vous de ne pas renommer cette fonction.</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="77"/>
        <source>&amp;New Script:</source>
        <translation>&amp;Nouveau script :</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="78"/>
        <source>New Script</source>
        <translation>Nouveau script</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="123"/>
        <source>Do you really want to delete this script?</source>
        <translation>Effacer définitivement ce script ?</translation>
    </message>
</context>
<context>
    <name>LatexEditor</name>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="32"/>
        <source>Enter Code:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="44"/>
        <source>Update</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="51"/>
        <source>Revert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="130"/>
        <source>Program Messages:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="181"/>
        <source>Status: Unknown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="165"/>
        <source>Kill Program</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="73"/>
        <source>Options</source>
        <translation type="unfinished">Options</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="81"/>
        <source>Resolution:</source>
        <translation type="unfinished">Résolution :</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="88"/>
        <source>Automatic</source>
        <translation type="unfinished">Automatique</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="91"/>
        <source> DPI</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="104"/>
        <source>Program:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="116"/>
        <source>Use Preamble</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="330"/>
        <source>Status: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="334"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="336"/>
        <source>Finished</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="339"/>
        <source>Running</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="518"/>
        <source>No item selected!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="520"/>
        <source>Insert symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="13"/>
        <source>Editor</source>
        <translation type="unfinished">Éditeur</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="130"/>
        <source>Information</source>
        <translation type="unfinished">Information</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="124"/>
        <source>An editor for this frame is already running!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="150"/>
        <source>Editor running!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="132"/>
        <source>Please specify an editor in the preferences!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="167"/>
        <source>Could not create a temporary file to run the external editor!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="222"/>
        <source>Run External Editor...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="207"/>
        <source>Running the editor failed with exitcode %d!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="225"/>
        <source>Running the editor &quot;%1&quot; failed!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="155"/>
        <source>Run external editor...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LayerPalette</name>
    <message>
        <location filename="../../scribus/layers.cpp" line="290"/>
        <source>Delete Layer</source>
        <translation>Détruire le calque</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="291"/>
        <source>Do you want to delete all objects on this layer too?</source>
        <translation>Supprimer également tous les objets de ce calque ?</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="567"/>
        <source>Layers</source>
        <translation>Calques</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="588"/>
        <source>Name</source>
        <translation>Nom</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="596"/>
        <source>Add a new layer</source>
        <translation>Créer un nouveau calque</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="598"/>
        <source>Delete layer</source>
        <translation>Détruire le calque</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="599"/>
        <source>Raise layer</source>
        <translation>Placer le calque au-dessus</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="600"/>
        <source>Lower layer</source>
        <translation>Placer le calque au-dessous</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="586"/>
        <source>Opacity:</source>
        <translation>Opacité :</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="587"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="568"/>
        <source>Blend Mode:</source>
        <translation>Mode de fusion :</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="570"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="571"/>
        <source>Darken</source>
        <translation>Assombrir</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="572"/>
        <source>Lighten</source>
        <translation>Eclaircir</translation>
    </message>
    <message>