Subversion Repositories Scribus

Rev

Rev 12564 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="1.1" language="ko_KR">
<context>
    <name>@default</name>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="21"/>
        <source>getColorNames() -&gt; list

Returns a list containing the names of all defined colors in the document.
If no document is open, returns a list of the default document colors.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="22"/>
        <source>newDocDialog() -&gt; bool

Displays the &quot;New Document&quot; dialog box. Creates a new document if the user
accepts the settings. Does not create a document if the user presses cancel.
Returns true if a new document was created.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="55"/>
        <source>newDocument(size, margins, orientation, firstPageNumber,
                        unit, pagesType, firstPageOrder, numPages) -&gt; bool

Creates a new document and returns true if successful. The parameters have the
following meaning:

size = A tuple (width, height) describing the size of the document. You can
use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

margins = A tuple (left, right, top, bottom) describing the document
margins

orientation = the page orientation - constants PORTRAIT, LANDSCAPE

firstPageNumer = is the number of the first page in the document used for
pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
numbers if you&apos;re creating a document in several parts.

unit: this value sets the measurement units used by the document. Use a
predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
UNIT_PICAS, UNIT_POINTS.

pagesType = One of the predefined constants PAGE_n. PAGE_1 is single page,
PAGE_2 is for double sided documents, PAGE_3 is for 3 pages fold and
PAGE_4 is 4-fold.

firstPageOrder = What is position of first page in the document.
Indexed from 0 (0 = first).

numPage = Number of pages to be created.

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDocument(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 7, UNIT_POINTS,
PAGE_4, 3, 1)

May raise ScribusError if is firstPageOrder bigger than allowed by pagesType.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="21"/>
        <source>getFillColor([&quot;name&quot;]) -&gt; string

Returns the name of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="23"/>
        <source>moveObject(dx, dy [, &quot;name&quot;])

Moves the object &quot;name&quot; by dx and dy relative to its current position. The
distances are expressed in the current measurement unit of the document (see
UNIT constants). If &quot;name&quot; is not given the currently selected item is used.
If the object &quot;name&quot; belongs to a group, the whole group is moved.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="24"/>
        <source>setRedraw(bool)

Disables page redraw when bool = False, otherwise redrawing is enabled.
This change will persist even after the script exits, so make sure to call
setRedraw(True) in a finally: clause at the top level of your script.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="26"/>
        <source>createRect(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new rectangle on the current page and returns its name. The
coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name to reference that object in future. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="26"/>
        <source>newPage(where [,&quot;masterpage&quot;])

Creates a new page. If &quot;where&quot; is -1 the new Page is appended to the
document, otherwise the new page is inserted before &quot;where&quot;. Page numbers are
counted from 1 upwards, no matter what the displayed first page number of your
document is. The optional parameter &quot;masterpage&quot; specifies the name of the
master page for the new page.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="22"/>
        <source>setGradientFill(type, &quot;color1&quot;, shade1, &quot;color2&quot;, shade2, [&quot;name&quot;])

Sets the gradient fill of the object &quot;name&quot; to type. Color descriptions are
the same as for setFillColor() and setFillShade(). See the constants for
available types (FILL_&lt;type&gt;).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="43"/>
        <source>createParagraphStyle(...)

Creates a paragraph style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; specifies the name of the paragraphstyle to create

linespacingmode [optional] -&gt; specifies the linespacing mode; possible modes are:

fixed linespacing:          0

automatic linespacing:      1

baseline grid linespacing:  2

linespacing [optional] -&gt; specifies the linespacing if using fixed linespacing

alignment [optional] -&gt; specifies the alignment of the paragraph

-&gt; left:     0

-&gt; center:   1

-&gt; right:    2

-&gt; justify:  3

-&gt; extend:   4

leftmargin [optional], rightmargin [optional] -&gt; specify the margin

gapbefore [optional], gapafter [optional] -&gt; specify the gaps to the heading and following paragraphs

firstindent [optional] -&gt; the indent of the first line

hasdropcap [optional] -&gt; specifies if there are caps (1 = yes, 0 = no)

dropcaplines [optional] -&gt; height (in lines) of the caps if used

dropcapoffset [optional] -&gt; offset of the caps if used

&quot;charstyle&quot; [optional] -&gt; char style to use

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="23"/>
        <source>getFontSize([&quot;name&quot;]) -&gt; float

Returns the font size in points for the text frame &quot;name&quot;. If this text
frame has some text selected the value assigned to the first character of
the selection is returned.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="21"/>
        <source>messagebarText(&quot;string&quot;)

Writes the &quot;string&quot; into the Scribus message bar (status line). The text
must be UTF8 encoded or &apos;unicode&apos; string(recommended).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="21"/>
        <source>placeSVG(&quot;filename&quot;, x, y)

Places the SVG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SVG placed on the page

If loading was successful, the selection contains the imported SVG
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="35"/>
        <source>getColor(&quot;name&quot;) -&gt; tuple

Returns a tuple (C, M, Y, K) containing the four color components of the
color &quot;name&quot; from the current document. If no document is open, returns
the value of the named color from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="50"/>
        <source>getColorAsRGB(&quot;name&quot;) -&gt; tuple

Returns a tuple (R,G,B) containing the three color components of the
color &quot;name&quot; from the current document, converted to the RGB color
space. If no document is open, returns the value of the named color
from the default document colors.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="64"/>
        <source>changeColor(&quot;name&quot;, c, m, y, k)

Changes the color &quot;name&quot; to the specified CMYK value. The color value is
defined via four components c = Cyan, m = Magenta, y = Yellow and k = Black.
Color components should be in the range from 0 to 255.

May raise NotFoundError if the named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="94"/>
        <source>deleteColor(&quot;name&quot;, &quot;replace&quot;)

Deletes the color &quot;name&quot;. Every occurence of that color is replaced by the
color &quot;replace&quot;. If not specified, &quot;replace&quot; defaults to the color
&quot;None&quot; - transparent.

deleteColor works on the default document colors if there is no document open.
In that case, &quot;replace&quot;, if specified, has no effect.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="106"/>
        <source>replaceColor(&quot;name&quot;, &quot;replace&quot;)

Every occurence of the color &quot;name&quot; is replaced by the color &quot;replace&quot;.

May raise NotFoundError if a named color wasn&apos;t found.
May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="88"/>
        <source>messageBox(&quot;caption&quot;, &quot;message&quot;,
    icon=ICON_NONE, button1=BUTTON_OK|BUTTONOPT_DEFAULT,
    button2=BUTTON_NONE, button3=BUTTON_NONE) -&gt; integer

Displays a message box with the title &quot;caption&quot;, the message &quot;message&quot;, and
an icon &quot;icon&quot; and up to 3 buttons. By default no icon is used and a single
button, OK, is displayed. Only the caption and message arguments are required,
though setting an icon and appropriate button(s) is strongly
recommended. The message text may contain simple HTML-like markup.

Returns the number of the button the user pressed. Button numbers start
at 1.

For the icon and the button parameters there are predefined constants available
with the same names as in the Qt Documentation. These are the BUTTON_* and
ICON_* constants defined in the module. There are also two extra constants that
can be binary-ORed with button constants:
    BUTTONOPT_DEFAULT   Pressing enter presses this button.
    BUTTONOPT_ESCAPE    Pressing escape presses this button.

Usage examples:
result = messageBox(&apos;Script failed&apos;,
                    &apos;This script only works when you have a text frame selected.&apos;,
                    ICON_ERROR)
result = messageBox(&apos;Monkeys!&apos;, &apos;Something went ook! &lt;i&gt;Was it a monkey?&lt;/i&gt;&apos;,
                    ICON_WARNING, BUTTON_YES|BUTTONOPT_DEFAULT,
                    BUTTON_NO, BUTTON_IGNORE|BUTTONOPT_ESCAPE)

Defined button and icon constants:
BUTTON_NONE, BUTTON_ABORT, BUTTON_CANCEL, BUTTON_IGNORE, BUTTON_NO,
BUTTON_NOALL, BUTTON_OK, BUTTON_RETRY, BUTTON_YES, BUTTON_YESALL,
ICON_NONE, ICON_INFORMATION, ICON_WARNING, ICON_CRITICAL.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="101"/>
        <source>valueDialog(caption, message [,defaultvalue]) -&gt; string

Shows the common &apos;Ask for string&apos; dialog and returns its value as a string
Parameters: window title, text in the window and optional &apos;default&apos; value.

Example: valueDialog(&apos;title&apos;, &apos;text in the window&apos;, &apos;optional&apos;)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="111"/>
        <source>newStyleDialog() -&gt; string

Shows &apos;Create new paragraph style&apos; dialog. Function returns real
style name or None when user cancels the dialog.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="96"/>
        <source>newDoc(size, margins, orientation, firstPageNumber,
                   unit, facingPages, firstSideLeft) -&gt; bool

WARNING: Obsolete procedure! Use newDocument instead.

Creates a new document and returns true if successful. The parameters have the
following meaning:

    size = A tuple (width, height) describing the size of the document. You can
    use predefined constants named PAPER_&lt;paper_type&gt; e.g. PAPER_A4 etc.

    margins = A tuple (left, right, top, bottom) describing the document
    margins

    orientation = the page orientation - constants PORTRAIT, LANDSCAPE

    firstPageNumer = is the number of the first page in the document used for
    pagenumbering. While you&apos;ll usually want 1, it&apos;s useful to have higher
    numbers if you&apos;re creating a document in several parts.

    unit: this value sets the measurement units used by the document. Use a
    predefined constant for this, one of: UNIT_INCHES, UNIT_MILLIMETERS,
    UNIT_PICAS, UNIT_POINTS.

    facingPages = FACINGPAGES, NOFACINGPAGES

    firstSideLeft = FIRSTPAGELEFT, FIRSTPAGERIGHT

The values for width, height and the margins are expressed in the given unit
for the document. PAPER_* constants are expressed in points. If your document
is not in points, make sure to account for this.

example: newDoc(PAPER_A4, (10, 10, 20, 20), LANDSCAPE, 1, UNIT_POINTS,
                FACINGPAGES, FIRSTPAGERIGHT)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="108"/>
        <source>closeDoc()

Closes the current document without prompting to save.

May throw NoDocOpenError if there is no document to close
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="117"/>
        <source>haveDoc() -&gt; bool

Returns true if there is a document open.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="128"/>
        <source>openDoc(&quot;name&quot;)

Opens the document &quot;name&quot;.

May raise ScribusError if the document could not be opened.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="141"/>
        <source>saveDoc()

Saves the current document with its current name, returns true if successful.
If the document has not already been saved, this may bring up an interactive
save file dialog.

If the save fails, there is currently no way to tell.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="152"/>
        <source>saveDocAs(&quot;name&quot;)

Saves the current document under the new name &quot;name&quot; (which may be a full or
relative path).

May raise ScribusError if the save fails.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="185"/>
        <source>setUnit(type)

Changes the measurement unit of the document. Possible values for &quot;unit&quot; are
defined as constants UNIT_&lt;type&gt;.

May raise ValueError if an invalid unit is passed.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="196"/>
        <source>getUnit() -&gt; integer (Scribus unit constant)

Returns the measurement units of the document. The returned value will be one
of the UNIT_* constants:
UNIT_INCHES, UNIT_MILLIMETERS, UNIT_PICAS, UNIT_POINTS.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="206"/>
        <source>loadStylesFromFile(&quot;filename&quot;)

Loads paragraph styles from the Scribus document at &quot;filename&quot; into the
current document.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="218"/>
        <source>setDocType(facingPages, firstPageLeft)

Sets the document type. To get facing pages set the first parameter to
FACINGPAGES, to switch facingPages off use NOFACINGPAGES instead.  If you want
to be the first page a left side set the second parameter to FIRSTPAGELEFT, for
a right page use FIRSTPAGERIGHT.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="226"/>
        <source>closeMasterPage()

Closes the currently active master page, if any, and returns editing
to normal. Begin editing with editMasterPage().
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="233"/>
        <source>masterPageNames()

Returns a list of the names of all master pages in the document.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="241"/>
        <source>editMasterPage(pageName)

Enables master page editing and opens the named master page
for editing. Finish editing with closeMasterPage().
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="249"/>
        <source>createMasterPage(pageName)

Creates a new master page named pageName and opens it for
editing.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="256"/>
        <source>deleteMasterPage(pageName)

Delete the named master page.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="51"/>
        <source>getLineColor([&quot;name&quot;]) -&gt; string

Returns the name of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="81"/>
        <source>getLineWidth([&quot;name&quot;]) -&gt; integer

Returns the line width of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="91"/>
        <source>getLineShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the line color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="113"/>
        <source>getLineEnd([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line cap style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. The cap types are:
CAP_FLAT, CAP_ROUND, CAP_SQUARE
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="124"/>
        <source>getLineStyle([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line style of the object &quot;name&quot;. If &quot;name&quot; is not given the
currently selected item is used. Line style constants are:
LINE_DASH, LINE_DASHDOT, LINE_DASHDOTDOT, LINE_DOT, LINE_SOLID
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="134"/>
        <source>getFillShade([&quot;name&quot;]) -&gt; integer

Returns the shading value of the fill color of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="155"/>
        <source>getImageScale([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple containing the scaling values of the image frame
&quot;name&quot;.  If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="165"/>
        <source>getImageName([&quot;name&quot;]) -&gt; string

Returns the filename for the image in the image frame. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="189"/>
        <source>getSize([&quot;name&quot;]) -&gt; (width,height)

Returns a (width, height) tuple with the size of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. The size is
expressed in the current measurement unit of the document - see UNIT_&lt;type&gt;
for reference.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="200"/>
        <source>getRotation([&quot;name&quot;]) -&gt; integer

Returns the rotation of the object &quot;name&quot;. The value is expressed in degrees,
and clockwise is positive. If &quot;name&quot; is not given the currently selected item
is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="209"/>
        <source>getAllObjects() -&gt; list

Returns a list containing the names of all objects on the current page.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="83"/>
        <source>getPropertyCType(object, property, includesuper=True)

Returns the name of the C type of `property&apos; of `object&apos;. See getProperty()
for details of arguments.

If `includesuper&apos; is true, search inherited properties too.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="101"/>
        <source>getPropertyNames(object, includesuper=True)

Return a list of property names supported by `object&apos;.
If `includesuper&apos; is true, return properties supported
by parent classes as well.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="135"/>
        <source>getProperty(object, property)

Return the value of the property `property&apos; of the passed `object&apos;.

The `object&apos; argument may be a string, in which case the named PageItem
is searched for. It may also be a PyCObject, which may point to any
C++ QObject instance.

The `property&apos; argument must be a string, and is the name of the property
to look up on `object&apos;.

The return value varies depending on the type of the property.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetsetprop.h" line="165"/>
        <source>setProperty(object, property, value)

Set `property&apos; of `object&apos; to `value&apos;. If `value&apos; cannot be converted to a type
compatible with the type of `property&apos;, an exception is raised. An exception may
also be raised if the underlying setter fails.

See getProperty() for more information.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="35"/>
        <source>moveObjectAbs(x, y [, &quot;name&quot;])

Moves the object &quot;name&quot; to a new location. The coordinates are expressed in
the current measurement unit of the document (see UNIT constants).  If &quot;name&quot;
is not given the currently selected item is used.  If the object &quot;name&quot;
belongs to a group, the whole group is moved.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="69"/>
        <source>sizeObject(width, height [, &quot;name&quot;])

Resizes the object &quot;name&quot; to the given width and height. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="80"/>
        <source>getSelectedObject([nr]) -&gt; string

Returns the name of the selected object. &quot;nr&quot; if given indicates the number
of the selected object, e.g. 0 means the first selected object, 1 means the
second selected Object and so on.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="89"/>
        <source>selectionCount() -&gt; integer

Returns the number of selected objects.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="98"/>
        <source>selectObject(&quot;name&quot;)

Selects the object with the given &quot;name&quot;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="107"/>
        <source>deselectAll()

Deselects all objects in the whole document.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="118"/>
        <source>groupObjects(list)

Groups the objects named in &quot;list&quot; together. &quot;list&quot; must contain the names
of the objects to be grouped. If &quot;list&quot; is not given the currently selected
items are used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="126"/>
        <source>unGroupObjects(&quot;name&quot;)

Destructs the group the object &quot;name&quot; belongs to.If &quot;name&quot; is not given the currently selected item is used.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="141"/>
        <source>scaleGroup(factor [,&quot;name&quot;])

Scales the group the object &quot;name&quot; belongs to. Values greater than 1 enlarge
the group, values smaller than 1 make the group smaller e.g a value of 0.5
scales the group to 50 % of its original size, a value of 1.5 scales the group
to 150 % of its original size.  The value for &quot;factor&quot; must be greater than
0. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if an invalid scale factor is passed.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="153"/>
        <source>loadImage(&quot;filename&quot; [, &quot;name&quot;])

Loads the picture &quot;picture&quot; into the image frame &quot;name&quot;. If &quot;name&quot; is
not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="166"/>
        <source>scaleImage(x, y [, &quot;name&quot;])

Sets the scaling factors of the picture in the image frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used. A number of 1
means 100 %.

May raise WrongFrameTypeError if the target frame is not an image frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="177"/>
        <source>lockObject([&quot;name&quot;]) -&gt; bool

Locks the object &quot;name&quot; if it&apos;s unlocked or unlock it if it&apos;s locked.
If &quot;name&quot; is not given the currently selected item is used. Returns true
if locked.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="187"/>
        <source>isLocked([&quot;name&quot;]) -&gt; bool

Returns true if is the object &quot;name&quot; locked.  If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="199"/>
        <source>setScaleImageToFrame(scaletoframe, proportional=None, name=&lt;selection&gt;)

Sets the scale to frame on the selected or specified image frame to `scaletoframe&apos;.
If `proportional&apos; is specified, set fixed aspect ratio scaling to `proportional&apos;.
Both `scaletoframe&apos; and `proportional&apos; are boolean.

May raise WrongFrameTypeError.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="33"/>
        <source>getFontNames() -&gt; list

Returns a list with the names of all available fonts.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="43"/>
        <source>getXFontNames() -&gt; list of tuples

Returns a larger font info. It&apos;s a list of the tuples with:
[ (Scribus name, Family, Real name, subset (1|0), embed PS (1|0), font file), (...), ... ]
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="62"/>
        <source>renderFont(&quot;name&quot;, &quot;filename&quot;, &quot;sample&quot;, size, format=&quot;PPM&quot;) -&gt; bool

Creates an image preview of font &quot;name&quot; with given text &quot;sample&quot; and size.
If &quot;filename&quot; is not &quot;&quot;, image is saved into &quot;filename&quot;. Otherwise
image data is returned as a string. The optional &quot;format&quot; argument
specifies the image format to generate, and supports any format allowed
by QPixmap.save(). Common formats are PPM, JPEG, PNG and XPM.

May raise NotFoundError if the specified font can&apos;t be found.
May raise ValueError if an empty sample or filename is passed.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="71"/>
        <source>getLayers() -&gt; list

Returns a list with the names of all defined layers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="83"/>
        <source>setActiveLayer(&quot;name&quot;)

Sets the active layer to the layer named &quot;name&quot;.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="92"/>
        <source>getActiveLayer() -&gt; string

Returns the name of the current active layer.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="105"/>
        <source>sentToLayer(&quot;layer&quot; [, &quot;name&quot;])

Sends the object &quot;name&quot; to the layer &quot;layer&quot;. The layer must exist.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="118"/>
        <source>setLayerVisible(&quot;layer&quot;, visible)

Sets the layer &quot;layer&quot; to be visible or not. If is the visible set to false
the layer is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="222"/>
        <source>isLayerPrintable(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is printable or not, a value of True means
that the layer &quot;layer&quot; can be printed, a value of False means that printing
the layer &quot;layer&quot; is disabled.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="300"/>
        <source>deleteLayer(&quot;layer&quot;)

Deletes the layer with the name &quot;layer&quot;. Nothing happens if the layer doesn&apos;t
exists or if it&apos;s the only layer in the document.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="311"/>
        <source>createLayer(layer)

Creates a new layer with the name &quot;name&quot;.

May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="320"/>
        <source>getGuiLanguage() -&gt; string

Returns a string with the -lang value.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="43"/>
        <source>createEllipse(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new ellipse on the current page and returns its name.
The coordinates are given in the current measurement units of the document
(see UNIT constants). &quot;name&quot; should be a unique identifier for the object
because you need this name for further referencing of that object. If &quot;name&quot;
is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="60"/>
        <source>createImage(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new picture frame on the current page and returns its name. The
coordinates are given in the current measurement units of the document.
&quot;name&quot; should be a unique identifier for the object because you need this
name for further access to that object. If &quot;name&quot; is not given Scribus will
create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="75"/>
        <source>createText(x, y, width, height, [&quot;name&quot;]) -&gt; string

Creates a new text frame on the actual page and returns its name.
The coordinates are given in the actual measurement unit of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further referencing of that object. If &quot;name&quot; is not
given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="90"/>
        <source>createLine(x1, y1, x2, y2, [&quot;name&quot;]) -&gt; string

Creates a new line from the point(x1, y1) to the point(x2, y2) and returns
its name. The coordinates are given in the current measurement unit of the
document (see UNIT constants). &quot;name&quot; should be a unique identifier for the
object because you need this name for further access to that object. If
&quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="108"/>
        <source>createPolyLine(list, [&quot;name&quot;]) -&gt; string

Creates a new polyline and returns its name. The points for the polyline are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
The coordinates are given in the current measurement units of the document (see
UNIT constants). &quot;name&quot; should be a unique identifier for the object because
you need this name for further access to that object. If &quot;name&quot; is not given
Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="128"/>
        <source>createPolygon(list, [&quot;name&quot;]) -&gt; string

Creates a new polygon and returns its name. The points for the polygon are
stored in the list &quot;list&quot; in the following order: [x1, y1, x2, y2...xn. yn].
At least three points are required. There is no need to repeat the first point
to close the polygon. The polygon is automatically closed by connecting the
first and the last point.  The coordinates are given in the current measurement
units of the document (see UNIT constants).  &quot;name&quot; should be a unique
identifier for the object because you need this name for further access to that
object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="149"/>
        <source>createBezierLine(list, [&quot;name&quot;]) -&gt; string

Creates a new bezier curve and returns its name. The points for the bezier
curve are stored in the list &quot;list&quot; in the following order:
[x1, y1, kx1, ky1, x2, y2, kx2, ky2...xn. yn, kxn. kyn]
In the points list, x and y mean the x and y coordinates of the point and kx
and ky meaning the control point for the curve.  The coordinates are given in
the current measurement units of the document (see UNIT constants). &quot;name&quot;
should be a unique identifier for the object because you need this name for
further access to that object. If &quot;name&quot; is not given Scribus will create one
for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise ValueError if an insufficient number of points is passed or if
the number of values passed don&apos;t group into points without leftovers.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="165"/>
        <source>createPathText(x, y, &quot;textbox&quot;, &quot;beziercurve&quot;, [&quot;name&quot;]) -&gt; string

Creates a new pathText by merging the two objects &quot;textbox&quot; and
&quot;beziercurve&quot; and returns its name. The coordinates are given in the current
measurement unit of the document (see UNIT constants). &quot;name&quot; should be a
unique identifier for the object because you need this name for further access
to that object. If &quot;name&quot; is not given Scribus will create one for you.

May raise NameExistsError if you explicitly pass a name that&apos;s already used.
May raise NotFoundError if one or both of the named base object don&apos;t exist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="177"/>
        <source>deleteObject([&quot;name&quot;])

Deletes the item with the name &quot;name&quot;. If &quot;name&quot; is not given the currently
selected item is deleted.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="211"/>
        <source>objectExists([&quot;name&quot;]) -&gt; bool

Test if an object with specified name really exists in the document.
The optional parameter is the object name. When no object name is given,
returns True if there is something selected.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="227"/>
        <source>setStyle(&quot;style&quot; [, &quot;name&quot;])

Apply the named &quot;style&quot; to the object named &quot;name&quot;. If is no object name
given, it&apos;s applied on the selected object.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="240"/>
        <source>getAllStyles() -&gt; list

Return a list of the names of all paragraph styles in the current document.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="36"/>
        <source>currentPage() -&gt; integer

Returns the number of the current working page. Page numbers are counted from 1
upwards, no matter what the displayed first page number of your document is.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="45"/>
        <source>redrawAll()

Redraws all pages.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="65"/>
        <source>savePageAsEPS(&quot;name&quot;)

Saves the current page as an EPS to the file &quot;name&quot;.

May raise ScribusError if the save failed.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="78"/>
        <source>deletePage(nr)

Deletes the given page. Does nothing if the document contains only one page.
Page numbers are counted from 1 upwards, no matter what the displayed first
page number is.

May raise IndexError if the page number is out of range
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="100"/>
        <source>pageCount() -&gt; integer

Returns the number of pages in the document.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="110"/>
        <source>getHGuides() -&gt; list

Returns a list containing positions of the horizontal guides. Values are in the
document&apos;s current units - see UNIT_&lt;type&gt; constants.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="123"/>
        <source>setHGuides(list)

Sets horizontal guides. Input parameter must be a list of guide positions
measured in the current document units - see UNIT_&lt;type&gt; constants.

Example: setHGuides(getHGuides() + [200.0, 210.0] # add new guides without any lost
         setHGuides([90,250]) # replace current guides entirely
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="132"/>
        <source>getVGuides()

See getHGuides.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="141"/>
        <source>setVGuides()

See setHGuides.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="151"/>
        <source>getPageSize() -&gt; tuple

Returns a tuple with page dimensions measured in the document&apos;s current units.
See UNIT_&lt;type&gt; constants and getPageMargins()
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="167"/>
        <source>getPageItems() -&gt; list

Returns a list of tuples with items on the current page. The tuple is:
(name, objectType, order) E.g. [(&apos;Text1&apos;, 4, 0), (&apos;Image1&apos;, 2, 1)]
means that object named &apos;Text1&apos; is a text frame (type 4) and is the first at
the page...
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="181"/>
        <source>getPageMargins()

Returns the page margins as a (top, left, right, bottom) tuple in the current
units. See UNIT_&lt;type&gt; constants and getPageSize().
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="33"/>
        <source>setFillColor(&quot;color&quot;, [&quot;name&quot;])

Sets the fill color of the object &quot;name&quot; to the color &quot;color&quot;. &quot;color&quot;
is the name of one of the defined colors. If &quot;name&quot; is not given the
currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="63"/>
        <source>setLineColor(&quot;color&quot;, [&quot;name&quot;])

Sets the line color of the object &quot;name&quot; to the color &quot;color&quot;. If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="96"/>
        <source>setLineWidth(width, [&quot;name&quot;])

Sets line width of the object &quot;name&quot; to &quot;width&quot;. &quot;width&quot; must be in the
range from 0.0 to 12.0 inclusive, and is measured in points. If &quot;name&quot; is not
given the currently selected item is used.

May raise ValueError if the line width is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="110"/>
        <source>setLineShade(shade, [&quot;name&quot;])

Sets the shading of the line color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full color intensity). If &quot;name&quot; is not given the currently selected item
is used.

May raise ValueError if the line shade is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="121"/>
        <source>setLineJoin(join, [&quot;name&quot;])

Sets the line join style of the object &quot;name&quot; to the style &quot;join&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for join - JOIN_&lt;type&gt;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="132"/>
        <source>setLineEnd(endtype, [&quot;name&quot;])

Sets the line cap style of the object &quot;name&quot; to the style &quot;cap&quot;.
If &quot;name&quot; is not given the currently selected item is used. There are
predefined constants for &quot;cap&quot; - CAP_&lt;type&gt;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="143"/>
        <source>setLineStyle(style, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the style &quot;style&quot;. If &quot;name&quot;
is not given the currently selected item is used. There are predefined
constants for &quot;style&quot; - LINE_&lt;style&gt;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="157"/>
        <source>setFillShade(shade, [&quot;name&quot;])

Sets the shading of the fill color of the object &quot;name&quot; to &quot;shade&quot;.
&quot;shade&quot; must be an integer value in the range from 0 (lightest) to 100
(full Color intensity). If &quot;name&quot; is not given the currently selected
Item is used.

May raise ValueError if the fill shade is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="169"/>
        <source>setCornerRadius(radius, [&quot;name&quot;])

Sets the corner radius of the object &quot;name&quot;. The radius is expressed
in points. If &quot;name&quot; is not given the currently selected item is used.

May raise ValueError if the corner radius is negative.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="181"/>
        <source>setMultiLine(&quot;namedStyle&quot;, [&quot;name&quot;])

Sets the line style of the object &quot;name&quot; to the named style &quot;namedStyle&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise NotFoundError if the line style doesn&apos;t exist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="35"/>
        <source>getFont([&quot;name&quot;]) -&gt; string

Returns the font name for the text frame &quot;name&quot;. If this text frame
has some text selected the value assigned to the first character
of the selection is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="45"/>
        <source>getTextLength([&quot;name&quot;]) -&gt; integer

Returns the length of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="67"/>
        <source>getText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot;. If this text frame has some text
selected, the selected text is returned. All text in the frame, not just
currently visible text, is returned. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="79"/>
        <source>getAllText([&quot;name&quot;]) -&gt; string

Returns the text of the text frame &quot;name&quot; and of all text frames which are
linked with this frame. If this textframe has some text selected, the selected
text is returned. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="89"/>
        <source>getLineSpacing([&quot;name&quot;]) -&gt; float

Returns the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; expressed in
points. If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="110"/>
        <source>getColumnGap([&quot;name&quot;]) -&gt; float

Returns the column gap size of the text frame &quot;name&quot; expressed in points. If
&quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="120"/>
        <source>getColumns([&quot;name&quot;]) -&gt; integer

Gets the number of columns of the text frame &quot;name&quot;. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="132"/>
        <source>setText(&quot;text&quot;, [&quot;name&quot;])

Sets the text of the text frame &quot;name&quot; to the text of the string &quot;text&quot;.
Text must be UTF8 encoded - use e.g. unicode(text, &apos;iso-8859-2&apos;). See the FAQ
for more details. If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="159"/>
        <source>setFont(&quot;font&quot;, [&quot;name&quot;])

Sets the font of the text frame &quot;name&quot; to &quot;font&quot;. If there is some text
selected only the selected text is changed.  If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError if the font cannot be found.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="173"/>
        <source>setFontSize(size, [&quot;name&quot;])

Sets the font size of the text frame &quot;name&quot; to &quot;size&quot;. &quot;size&quot; is treated
as a value in points. If there is some text selected only the selected text is
changed. &quot;size&quot; must be in the range 1 to 512. If &quot;name&quot; is not given the
currently selected item is used.

May throw ValueError for a font size that&apos;s out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="186"/>
        <source>setLineSpacing(size, [&quot;name&quot;])

Sets the line spacing (&quot;leading&quot;) of the text frame &quot;name&quot; to &quot;size&quot;.
&quot;size&quot; is a value in points. If &quot;name&quot; is not given the currently selected
item is used.

May throw ValueError if the line spacing is out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="211"/>
        <source>setColumnGap(size, [&quot;name&quot;])

Sets the column gap of the text frame &quot;name&quot; to the value &quot;size&quot;. If
&quot;name&quot; is not given the currently selected item is used.

May throw ValueError if the column gap is out of bounds (must be positive).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="223"/>
        <source>setColumns(nr, [&quot;name&quot;])

Sets the number of columns of the text frame &quot;name&quot; to the integer &quot;nr&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May throw ValueError if number of columns is not at least one.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="236"/>
        <source>setTextAlignment(align, [&quot;name&quot;])

Sets the text alignment of the text frame &quot;name&quot; to the specified alignment.
If &quot;name&quot; is not given the currently selected item is used. &quot;align&quot; should
be one of the ALIGN_ constants defined in this module - see dir(scribus).

May throw ValueError for an invalid alignment constant.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="250"/>
        <source>selectText(start, count, [&quot;name&quot;])

Selects &quot;count&quot; characters of text in the text frame &quot;name&quot; starting from the
character &quot;start&quot;. Character counting starts at 0. If &quot;count&quot; is zero, any
text selection will be cleared.  If &quot;name&quot; is not given the currently
selected item is used.

May throw IndexError if the selection is outside the bounds of the text.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="261"/>
        <source>deleteText([&quot;name&quot;])

Deletes any text in the text frame &quot;name&quot;. If there is some text selected,
only the selected text will be deleted. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="272"/>
        <source>setTextColor(&quot;color&quot;, [&quot;name&quot;])

Sets the text color of the text frame &quot;name&quot; to the color &quot;color&quot;. If there
is some text selected only the selected text is changed. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="282"/>
        <source>setTextStroke(&quot;color&quot;, [&quot;name&quot;])

Set &quot;color&quot; of the text stroke. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="295"/>
        <source>setTextShade(shade, [&quot;name&quot;])

Sets the shading of the text color of the object &quot;name&quot; to &quot;shade&quot;. If
there is some text selected only the selected text is changed. &quot;shade&quot; must
be an integer value in the range from 0 (lightest) to 100 (full color
intensity). If &quot;name&quot; is not given the currently selected item is
used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="308"/>
        <source>linkTextFrames(&quot;fromname&quot;, &quot;toname&quot;)

Link two text frames. The frame named &quot;fromname&quot; is linked to the
frame named &quot;toname&quot;. The target frame must be an empty text frame
and must not link to or be linked from any other frames already.

May throw ScribusException if linking rules are violated.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="325"/>
        <source>unlinkTextFrames(&quot;name&quot;)

Remove the specified (named) object from the text frame flow/linkage. If the
frame was in the middle of a chain, the previous and next frames will be
connected, eg &apos;a-&gt;b-&gt;c&apos; becomes &apos;a-&gt;c&apos; when you unlinkTextFrames(b)&apos;

May throw ScribusException if linking rules are violated.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="338"/>
        <source>traceText([&quot;name&quot;])

Convert the text frame &quot;name&quot; to outlines. If &quot;name&quot; is not given the
currently selected item is used.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="352"/>
        <source>textOverflows([&quot;name&quot;, nolinks]) -&gt; integer

Returns the actual number of overflowing characters in text frame &quot;name&quot;.
If is nolinks set to non zero value it takes only one frame - it doesn&apos;t
use text frame linking. Without this parameter it search all linking chain.

May raise WrongFrameTypeError if the target frame is not an text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="406"/>
        <source>isPDFBookmark([&quot;name&quot;]) -&gt; bool

Returns true if the text frame &quot;name&quot; is a PDF bookmark.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="34"/>
        <source>progressReset()

Cleans up the Scribus progress bar previous settings. It is called before the
new progress bar use. See progressSet.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="47"/>
        <source>progressTotal(max)

Sets the progress bar&apos;s maximum steps value to the specified number.
See progressSet.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="61"/>
        <source>progressSet(nr)

Set the progress bar position to &quot;nr&quot;, a value relative to the previously set
progressTotal. The progress bar uses the concept of steps; you give it the
total number of steps and the number of steps completed so far and it will
display the percentage of steps that have been completed. You can specify the
total number of steps with progressTotal(). The current number of steps is set
with progressSet(). The progress bar can be rewound to the beginning with
progressReset(). [based on info taken from Trolltech&apos;s Qt docs]
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="69"/>
        <source>setCursor()

[UNSUPPORTED!] This might break things, so steer clear for now.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="83"/>
        <source>docChanged(bool)

Enable/disable save icon in the Scribus icon bar and the Save menu item. It&apos;s
useful to call this procedure when you&apos;re changing the document, because Scribus
won&apos;t automatically notice when you change the document using a script.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="95"/>
        <source>zoomDocument(double)

Zoom the document in main GUI window. Actions have whole number
values like 20.0, 100.0, etc. Zoom to Fit uses -100 as a marker.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="31"/>
        <source>getFillTransparency([&quot;name&quot;]) -&gt; float

Returns the fill transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="41"/>
        <source>getFillBlendmode([&quot;name&quot;]) -&gt; integer

Returns the fill blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="61"/>
        <source>getLineTransparency([&quot;name&quot;]) -&gt; float

Returns the line transparency of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="71"/>
        <source>getLineBlendmode([&quot;name&quot;]) -&gt; integer

Returns the line blendmode of the object &quot;name&quot;. If &quot;name&quot;
is not given the currently selected Item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="144"/>
        <source>setLayerLocked(&quot;layer&quot;, locked)

Sets the layer &quot;layer&quot; to be locked or not. If locked is set to
true the layer will be locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="236"/>
        <source>isLayerLocked(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is locked or not, a value of True means
that the layer &quot;layer&quot; is editable, a value of False means that the layer
&quot;layer&quot; is locked.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="250"/>
        <source>isLayerOutlined(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is outlined or not, a value of True means
that the layer &quot;layer&quot; is outlined, a value of False means that the layer
&quot;layer&quot; is normal.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="263"/>
        <source>isLayerFlow(&quot;layer&quot;) -&gt; bool

Returns whether text flows around objects on layer &quot;layer&quot;, a value of True means
that text flows around, a value of False means that the text does not flow around.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="275"/>
        <source>getLayerBlendmode(&quot;layer&quot;) -&gt; int

Returns the &quot;layer&quot; layer blendmode,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="287"/>
        <source>getLayerTransparency(&quot;layer&quot;) -&gt; float

Returns the &quot;layer&quot; layer transparency,

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="193"/>
        <source>textFlowMode(&quot;name&quot; [, state])

Enables/disables &quot;Text Flows Around Frame&quot; feature for object &quot;name&quot;.
Called with parameters string name and optional int &quot;state&quot; (0 &lt;= state &lt;= 3).
Setting &quot;state&quot; to 0 will disable text flow.
Setting &quot;state&quot; to 1 will make text flow around object frame.
Setting &quot;state&quot; to 2 will make text flow around bounding box.
Setting &quot;state&quot; to 3 will make text flow around contour line.
If &quot;state&quot; is not passed, text flow is toggled.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdobj.h" line="252"/>
        <source>duplicateObject([&quot;name&quot;]) -&gt; string

creates a Duplicate of the selected Object (or Selection Group).
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="162"/>
        <source>setInfo(&quot;author&quot;, &quot;info&quot;, &quot;description&quot;) -&gt; bool

Sets the document information. &quot;Author&quot;, &quot;Info&quot;, &quot;Description&quot; are
strings.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="54"/>
        <source>getPageType() -&gt; integer

Returns the type of the Page, 0 means left Page, 1 is a middle Page and 2 is a right Page
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="55"/>
        <source>getTextLines([&quot;name&quot;]) -&gt; integer

Returns the number of lines of the text in the text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdcolor.h" line="77"/>
        <source>defineColor(&quot;name&quot;, c, m, y, k)

Defines a new color &quot;name&quot;. The color Value is defined via four components:
c = Cyan, m = Magenta, y = Yellow and k = Black. Color components should be in
the range from 0 to 255.

May raise ValueError if an invalid color name is specified.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="145"/>
        <source>getCornerRadius([&quot;name&quot;]) -&gt; integer

Returns the corner radius of the object &quot;name&quot;. The radius is
expressed in points. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="177"/>
        <source>getPosition([&quot;name&quot;]) -&gt; (x,y)

Returns a (x, y) tuple with the position of the object &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.
The position is expressed in the actual measurement unit of the document
- see UNIT_&lt;type&gt; for reference.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="59"/>
        <source>rotateObjectAbs(rot [, &quot;name&quot;])

Sets the rotation of the object &quot;name&quot; to &quot;rot&quot;. Positive values
mean counter clockwise rotation. If &quot;name&quot; is not given the currently
selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="131"/>
        <source>setLayerPrintable(&quot;layer&quot;, printable)

Sets the layer &quot;layer&quot; to be printable or not. If is the
printable set to false the layer won&apos;t be printed.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="208"/>
        <source>isLayerVisible(&quot;layer&quot;) -&gt; bool

Returns whether the layer &quot;layer&quot; is visible or not, a value of True means
that the layer &quot;layer&quot; is visible, a value of False means that the layer
&quot;layer&quot; is invisible.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="146"/>
        <source>insertText(&quot;text&quot;, pos, [&quot;name&quot;])

Inserts the text &quot;text&quot; at the position &quot;pos&quot; into the text frame &quot;name&quot;.
Text must be UTF encoded (see setText() as reference) The first character has an
index of 0. Inserting text at position -1 appends it to the frame. If &quot;name&quot; is
not given the currently selected Item is used.

May throw IndexError for an insertion out of bounds.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddoc.h" line="173"/>
        <source>setMargins(lr, rr, tr, br)

Sets the margins of the document, Qt::DockLeft(lr), Qt::DockRight(rr), Qt::DockTop(tr) and Qt::DockBottom(br)
margins are given in the measurement units of the document - see UNIT_&lt;type&gt;
constants.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="157"/>
        <source>setLayerOutlined(&quot;layer&quot;, outline)

Sets the layer &quot;layer&quot; to be locked or not. If outline is set to
true the layer will be displayed outlined.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="170"/>
        <source>setLayerFlow(&quot;layer&quot;, flow)

Sets the layers &quot;layer&quot;  flowcontrol to flow. If flow is set to
true text in layers above this one will flow around objects on this layer.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="182"/>
        <source>setLayerBlendmode(&quot;layer&quot;, blend)

Sets the layers &quot;layer&quot;  blendmode to blend.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="194"/>
        <source>setLayerTransparency(&quot;layer&quot;, trans)

Sets the layers &quot;layer&quot;  transparency to trans.

May raise NotFoundError if the layer can&apos;t be found.
May raise ValueError if the layer name isn&apos;t acceptable.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="43"/>
        <source>setFillTransparency(transparency, [&quot;name&quot;])

Sets the fill transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="53"/>
        <source>setFillBlendmode(blendmode, [&quot;name&quot;])

Sets the fill blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="73"/>
        <source>setLineTransparency(transparency, [&quot;name&quot;])

Sets the line transparency of the object &quot;name&quot; to transparency
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdsetprop.h" line="83"/>
        <source>setLineBlendmode(blendmode, [&quot;name&quot;])

Sets the line blendmode of the object &quot;name&quot; to blendmode
If &quot;name&quot; is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="33"/>
        <source>placeEPS(&quot;filename&quot;, x, y)

Places the EPS &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the EPS placed on the page

If loading was successful, the selection contains the imported EPS
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="45"/>
        <source>placeSXD(&quot;filename&quot;, x, y)

Places the SXD &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the SXD placed on the page

If loading was successful, the selection contains the imported SXD
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/svgimport.h" line="57"/>
        <source>placeODG(&quot;filename&quot;, x, y)

Places the ODG &quot;filename&quot; onto the current page,
x and y specify the coordinate of the topleft corner of the ODG placed on the page

If loading was successful, the selection contains the imported ODG
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmddialog.h" line="46"/>
        <source>fileDialog(&quot;caption&quot;, [&quot;filter&quot;, &quot;defaultname&quot;, haspreview, issave, isdir]) -&gt; string with filename

Shows a File Open dialog box with the caption &quot;caption&quot;. Files are filtered
with the filter string &quot;filter&quot;. A default filename or file path can also
supplied, leave this string empty when you don&apos;t want to use it.  A value of
True for haspreview enables a small preview widget in the FileSelect box.  When
the issave parameter is set to True the dialog acts like a &quot;Save As&quot; dialog
otherwise it acts like a &quot;File Open Dialog&quot;. When the isdir parameter is True
the dialog shows and returns only directories. The default for all of the
optional parameters is False.

The filter, if specified, takes the form &apos;comment (*.type *.type2 ...)&apos;.
For example &apos;Images (*.png *.xpm *.jpg)&apos;.

Refer to the Qt-Documentation for QFileDialog for details on filters.

Example: fileDialog(&apos;Open input&apos;, &apos;CSV files (*.csv)&apos;)
Example: fileDialog(&apos;Save report&apos;, defaultname=&apos;report.txt&apos;, issave=True)
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdgetprop.h" line="102"/>
        <source>getLineJoin([&quot;name&quot;]) -&gt; integer (see constants)

Returns the line join style of the object &quot;name&quot;. If &quot;name&quot; is not given
the currently selected item is used.  The join types are:
JOIN_BEVEL, JOIN_MITTER, JOIN_ROUND
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmani.h" line="48"/>
        <source>rotateObject(rot [, &quot;name&quot;])

Rotates the object &quot;name&quot; by &quot;rot&quot; degrees relatively. The object is
rotated by the vertex that is currently selected as the rotation point - by
default, the top left vertex at zero rotation. Positive values mean counter
clockwise rotation when the default rotation point is used. If &quot;name&quot; is not
given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="91"/>
        <source>gotoPage(nr)

Moves to the page &quot;nr&quot; (that is, makes the current page &quot;nr&quot;). Note that
gotoPage doesn&apos;t (currently) change the page the user&apos;s view is displaying, it
just sets the page that script commands will operates on.

May raise IndexError if the page number is out of range.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="394"/>
        <source>setPDFBookmark(&quot;toggle&quot;, [&quot;name&quot;])

Sets whether (toggle = 1) the text frame &quot;name&quot; is a bookmark nor not.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="329"/>
        <source>moveSelectionToFront()

Moves current selection to front.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdmisc.h" line="338"/>
        <source>moveSelectionToFront()

Moves current selection to back.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdpage.h" line="198"/>
        <source>importPage(&quot;fromDoc&quot;, (pageList), [create, imortwhere, importwherePage])

Imports a set of pages (given as a tuple) from an existing document (the file name must be given). This functions maps the &quot;Page-&gt;Import&quot; dropdown menu function.
fromDoc: string; the filename of the document to import pages from
pageList: tuple with page numbers of pages to import
create: number; 0 to replace existing pages, 1 (default) to insert new pages
importWhere: number; the page number (of the current document) at which import the pages
importWherePage: number; used if create==1; 0 to create pages before selected page; 1 to create pages after selected page; 2 (default) to create pages at the end of the document
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdstyle.h" line="80"/>
        <source>createCharStyle(...)

Creates a character style. This function takes the following keyword parameters:

&quot;name&quot; [required] -&gt; name of the char style to create

&quot;font&quot; [optional] -&gt; name of the font to use

fontsize [optional] -&gt; font size to set (double)

&quot;features&quot; [optional] -&gt; nearer typographic details can be defined by a string that might contain the following phrases comma-seperated (without spaces!):

-&gt; inherit

-&gt; bold

-&gt; italic

-&gt; underline

-&gt; underlinewords

-&gt; strike

-&gt; superscript

-&gt; subscript

-&gt; outline

-&gt; shadowed

-&gt; allcaps

-&gt; smallcaps

&quot;fillcolor&quot; [optional], &quot;fillshade&quot; [optional] -&gt; specify fill options

&quot;strokecolor&quot; [optional], &quot;strokeshade&quot; [optional] -&gt; specify stroke options

baselineoffset [optional] -&gt; offset of the baseline

shadowxoffset [optional], shadowyoffset [optional] -&gt; offset of the shadow if used

outlinewidth [optional] -&gt; width of the outline if used

underlineoffset [optional], underlinewidth [optional] -&gt; underline options if used

strikethruoffset [optional], strikethruwidth [optional] -&gt; strikethru options if used

scaleh [optional], scalev [optional] -&gt; scale of the chars

tracking [optional] -&gt; tracking of the text

&quot;language&quot; [optional] -&gt; language code

</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="365"/>
        <source>hyphenateText([&quot;name&quot;]) -&gt; bool

Does hyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="379"/>
        <source>dehyphenateText([&quot;name&quot;]) -&gt; bool

Does dehyphenation on text frame &quot;name&quot;.
If &quot;name&quot; is not given the currently selected item is used.

May raise WrongFrameTypeError if the target frame is not a text frame
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/guiapp.h" line="106"/>
        <source>scrollDocument(x,y)

Scroll the document in main GUI window by x and y.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="100"/>
        <source>getTextDistances([&quot;name&quot;]) -&gt; tuple

Returns the text distances of the text frame &quot;name&quot; expressed in points. The
distances are returned as a tuple like (left, right, top, bottom). If &quot;name&quot;
is not given the currently selected item is used.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/scriptplugin/cmdtext.h" line="199"/>
        <source>setTextDistances(left, right, top, bottom, [&quot;name&quot;])

Sets the text distances of the text frame &quot;name&quot; to the values &quot;left&quot;
&quot;right&quot;, &quot;top&quot; and &quot;bottom&quot;. If &quot;name&quot; is not given the currently
selected item is used.

May throw ValueError if any of the distances are out of bounds (must be positive).
</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AIPlug</name>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="125"/>
        <source>Importing: %1</source>
        <translation>들여오는 중: %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="128"/>
        <source>Analyzing File:</source>
        <translation>파일 분석 중:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="289"/>
        <source>Group%1</source>
        <translation>그룹 %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importai.cpp" line="2251"/>
        <source>Generating Items</source>
        <translation>객체 생성 중</translation>
    </message>
</context>
<context>
    <name>About</name>
    <message>
        <location filename="../../scribus/about.cpp" line="97"/>
        <source>About Scribus %1</source>
        <translation>Scribus %1에 대하여</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="124"/>
        <source>%1 %2 %3</source>
        <translation>%1 %2 %3</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="132"/>
        <source>%3-%2-%1 %4 %5</source>
        <translation>%3-%2-%1 %4 %5</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="182"/>
        <source>Using Ghostscript version %1</source>
        <translation>Ghostscript버전 %1 사용 중</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="184"/>
        <source>No Ghostscript version available</source>
        <translation>사용 가능한 Ghostscript 버전이 없습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="185"/>
        <source>Build ID:</source>
        <translation>빌드ID:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="187"/>
        <source>&amp;About</source>
        <translation>대하여(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="296"/>
        <source>Development Team:</source>
        <translation>개발팀:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="304"/>
        <source>Contributions from:</source>
        <translation>기여:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="298"/>
        <source>Mac OS&amp;#174; X Aqua Port:</source>
        <translation>맥 OS&amp;#174; X 아쿠아 포트:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="302"/>
        <source>Windows&amp;#174; Port:</source>
        <translation>윈도우&amp;#174; 포트:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="306"/>
        <source>Official Documentation:</source>
        <translation>공식 문서:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="310"/>
        <source>Other Documentation:</source>
        <translation>기타 문서:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="200"/>
        <source>A&amp;uthors</source>
        <translation>저자(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="326"/>
        <source>Official Translations and Translators:</source>
        <translation>공식 번역 및 번역자:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="328"/>
        <source>Previous Translation Contributors:</source>
        <translation>기존 번역 기여자:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="214"/>
        <source>&amp;Translations</source>
        <translation>번역(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="340"/>
        <source>Homepage</source>
        <translation>홈페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="342"/>
        <source>Online Reference</source>
        <translation>온라인 참조</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="344"/>
        <source>Wiki</source>
        <translation>Wiki</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="346"/>
        <source>Bugs and Feature Requests</source>
        <translation>버그와 특성 요청</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="350"/>
        <source>Mailing List</source>
        <translation>메일링 목록</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="225"/>
        <source>&amp;Online</source>
        <translation>온라인(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="264"/>
        <source>&amp;Close</source>
        <translation>닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="316"/>
        <source>Tango Project Icons:</source>
        <translation>Tango 프로젝트 아이콘:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="228"/>
        <source>&amp;Updates</source>
        <translation>업데이트(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="276"/>
        <source>Check for updates to Scribus. No data from your machine will be transferred off it.</source>
        <translation>Scribus를 업데이트하기 위하여 체크합니다. 여러분의 PC의 자료는 전송되지 않습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="300"/>
        <source>OS/2&amp;#174;/eComStation&amp;#8482; Port:</source>
        <translation>OS/2&amp;#174;/eComStation&amp;#8482; 포트:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="314"/>
        <source>Splash Screen:</source>
        <translation>스플래시 화면:</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="272"/>
        <source>This panel shows the version, build date and compiled in library support in Scribus.</source>
        <translation>Scribus에서,버전과 빌드 날짜 그리고 컴파일된 라이브러리 지원을 나타냅니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="273"/>
        <source>The C-C-T-F equates to C=littlecms C=CUPS T=TIFF support F=Fontconfig support.Last Letter is the renderer C=cairo or Q=Qt</source>
        <translation>C-C-T-F는 C=littlecms C=CUPS T=TIFF지원 F=Fontconfig지원과 같습니다. 최종 문자는 렌더러 C=cairo 또는 Q=Qt입니다</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="274"/>
        <source>Missing library support is indicated by a *. This also indicates the version of Ghostscript which Scribus has detected.</source>
        <translation>*.은 빠진 라이브러리 지원을 나타냅니다. 이것은 또한 Scribus가 인지한 Ghostscript 버전을 나타냅니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="275"/>
        <source>The Windows version does not use fontconfig or CUPS libraries.</source>
        <translation>Windows 버전은 fontconfig 또는 CUPS 라이브러리를 이용하지 않습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="185"/>
        <source>&lt;p align=&quot;center&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</source>
        <translation>&lt;p 배열=&quot;중앙&quot;&gt;&lt;b&gt;%1 %2&lt;/b&gt;&lt;/p&gt;&lt;p 배열=&quot;중앙&quot;&gt;%3&lt;br&gt;%4 %5&lt;br&gt;%6&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="185"/>
        <source>Scribus Version</source>
        <translation>Scribus 버전</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="643"/>
        <source>Check for Updates</source>
        <translation>업데이트 체크</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="641"/>
        <source>Abort Update Check</source>
        <translation>뎁데이트 체크 취소</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="348"/>
        <source>Developer Blog</source>
        <translation>개발자 블로그</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="239"/>
        <source>&amp;Licence</source>
        <translation>허가권(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="248"/>
        <source>Unable to open licence file. Please check your install directory or the Scribus website for licencing information.</source>
        <translation>허가권 파일을 열수 없음.  허가권 정보를 위하여 설치 폴더 또는 Scribus 웹사이트를 체크하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="308"/>
        <source>Doc Translators:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="312"/>
        <source>Webmasters:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/about.cpp" line="619"/>
        <source>Unable to open %1 file. Please check your install directory or the Scribus website for %1 information.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AboutPlugins</name>
    <message>
        <location filename="../../scribus/aboutplugins.ui" line="13"/>
        <source>Scribus: About Plug-ins</source>
        <translation>Scribus: 플러그인에 대하여</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="68"/>
        <source>Filename:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="69"/>
        <source>Version:</source>
        <translation type="unfinished">버전:</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="72"/>
        <source>Enabled:</source>
        <translation type="unfinished">가능:</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="73"/>
        <source>Release Date:</source>
        <translation type="unfinished">공개 날짜:</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="80"/>
        <source>Description:</source>
        <translation type="unfinished">설명:</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="81"/>
        <source>Author(s):</source>
        <translation type="unfinished">저작자:</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="82"/>
        <source>Copyright:</source>
        <translation type="unfinished">저작권:</translation>
    </message>
    <message>
        <location filename="../../scribus/aboutplugins.cpp" line="83"/>
        <source>License:</source>
        <translation type="unfinished">허가권:</translation>
    </message>
</context>
<context>
    <name>AboutPluginsBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Scribus: About Plug-ins</source>
        <translation type="obsolete">Scribus: 플러그인에 대하여</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>File Name:</source>
        <translation type="obsolete">파일명:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Version:</source>
        <translation type="obsolete">버전:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Enabled:</source>
        <translation type="obsolete">가능:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Release Date:</source>
        <translation type="obsolete">공개 날짜:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Copyright:</source>
        <translation type="obsolete">저작권:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Author(s):</source>
        <translation type="obsolete">저작자:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Description:</source>
        <translation type="obsolete">설명:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>License:</source>
        <translation type="obsolete">허가권:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Close</source>
        <translation type="obsolete">닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>ActionManager</name>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1242"/>
        <source>&amp;New</source>
        <translation>새 파일(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1243"/>
        <source>&amp;Open...</source>
        <translation>열기(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1244"/>
        <source>&amp;Close</source>
        <translation>닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1245"/>
        <source>&amp;Save</source>
        <translation>저장(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1246"/>
        <source>Save &amp;As...</source>
        <translation>다른 이름으로(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1247"/>
        <source>Re&amp;vert to Saved</source>
        <translation>이전 저장 파일로 복원(&amp;V)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1248"/>
        <source>Collect for O&amp;utput...</source>
        <translation>저장 폴더 지정(&amp;U)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1249"/>
        <source>Get Text...</source>
        <translation>텍스트 파일 얻기...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1250"/>
        <source>Append &amp;Text...</source>
        <translation>텍스트 추가하기(&amp;T)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1251"/>
        <source>Get Image...</source>
        <translation>이미지 얻기...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1254"/>
        <source>Save &amp;Text...</source>
        <translation>텍스트 저장(&amp;T)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Save Page as &amp;EPS...</source>
        <translation type="obsolete">EPS 저장(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1256"/>
        <source>Save as P&amp;DF...</source>
        <translation>PDF 저장(&amp;D)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1257"/>
        <source>Document &amp;Setup...</source>
        <translation>문서 설정(&amp;S)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1259"/>
        <source>&amp;Print...</source>
        <translation>인쇄(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1260"/>
        <source>Print Previe&amp;w</source>
        <translation>인쇄 미리보기(&amp;W)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1261"/>
        <source>&amp;Quit</source>
        <translation>종료(&amp;Q)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1263"/>
        <source>&amp;Undo</source>
        <translation>이전작업(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1264"/>
        <source>&amp;Redo</source>
        <translation>재실행(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1265"/>
        <source>&amp;Item Action Mode</source>
        <translation>객체 실행 모드(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1266"/>
        <source>Cu&amp;t</source>
        <translation>잘라내기(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1269"/>
        <source>&amp;Copy</source>
        <translation>복사(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1270"/>
        <source>&amp;Paste</source>
        <translation>붙여넣기(&amp;P)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C&amp;lear Contents</source>
        <translation type="obsolete">내용 삭제(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1273"/>
        <source>Select &amp;All</source>
        <translation>전체 선택(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1275"/>
        <source>&amp;Deselect All</source>
        <translation>전체 선택 취소(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1276"/>
        <source>&amp;Search/Replace...</source>
        <translation>찾기/치환(&amp;S)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1277"/>
        <source>Edit Image...</source>
        <translation>이미지 편집...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1279"/>
        <source>C&amp;olors...</source>
        <translation>색상(&amp;O)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Paragraph Styles...</source>
        <translation type="obsolete">문단 스타일(&amp;P)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Line Styles...</source>
        <translation type="obsolete">선 스타일(&amp;L)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1283"/>
        <source>&amp;Master Pages...</source>
        <translation>마스터 페이지(&amp;M)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1284"/>
        <source>&amp;JavaScripts...</source>
        <translation>자바스크립트(&amp;J)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1258"/>
        <source>P&amp;references...</source>
        <translation>기본 설정(&amp;R)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1291"/>
        <source>%1 pt</source>
        <translation>%1 포인트</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1293"/>
        <source>&amp;Other...</source>
        <translation>기타(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1294"/>
        <source>&amp;Left</source>
        <translation>왼쪽(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1295"/>
        <source>&amp;Center</source>
        <translation>중앙(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1296"/>
        <source>&amp;Right</source>
        <translation>오른쪽(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1297"/>
        <source>&amp;Block</source>
        <translation>블록(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1298"/>
        <source>&amp;Forced</source>
        <translation>강제(&amp;F)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;%1 %</source>
        <translation type="obsolete">&amp;%1 %</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1309"/>
        <source>&amp;Normal</source>
        <translation>보통(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1310"/>
        <source>&amp;Underline</source>
        <translation>밑줄(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1311"/>
        <source>Underline &amp;Words</source>
        <translation>밑줄 단어(&amp;W)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1312"/>
        <source>&amp;Strike Through</source>
        <translation>취소선(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1313"/>
        <source>&amp;All Caps</source>
        <translation>대문자(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1314"/>
        <source>Small &amp;Caps</source>
        <translation>소문자(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1315"/>
        <source>Su&amp;perscript</source>
        <translation>윗첨자(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1316"/>
        <source>Su&amp;bscript</source>
        <translation>아래첨자(&amp;B)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Outline</source>
        <translation type="obsolete">윤곽선(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1318"/>
        <source>S&amp;hadow</source>
        <translation>음영(&amp;H)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1320"/>
        <source>&amp;Image Effects</source>
        <translation>이미지 효과(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1321"/>
        <source>&amp;Tabulators...</source>
        <translation>탭키 설정(&amp;T)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1324"/>
        <source>D&amp;uplicate</source>
        <translation>복제(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1325"/>
        <source>&amp;Multiple Duplicate</source>
        <translation>다수 복제(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1326"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1327"/>
        <source>&amp;Group</source>
        <translation>그룹(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1328"/>
        <source>&amp;Ungroup</source>
        <translation>그룹해제(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1329"/>
        <source>Is &amp;Locked</source>
        <translation>잠금(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1330"/>
        <source>Si&amp;ze is Locked</source>
        <translation>크기 잠금(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1334"/>
        <source>Lower to &amp;Bottom</source>
        <translation>아래로 이동(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1335"/>
        <source>Raise to &amp;Top</source>
        <translation>위로 이동(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1336"/>
        <source>&amp;Lower</source>
        <translation>내리기(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1337"/>
        <source>&amp;Raise</source>
        <translation>올리기(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1338"/>
        <source>Send to S&amp;crapbook</source>
        <translation>스크랩북으로 보내기(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1340"/>
        <source>&amp;Attributes...</source>
        <translation>속성(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1341"/>
        <source>More Info...</source>
        <translation>자세한 정보...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1342"/>
        <source>I&amp;mage Visible</source>
        <translation>이미지 보기(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1343"/>
        <source>&amp;Update Image</source>
        <translation>이미지 업데이트(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1344"/>
        <source>Adjust Frame to Image</source>
        <translation>프레임을 이미지에 맞추기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1346"/>
        <source>Extended Image Properties</source>
        <translation>확장 이미지 속성</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1347"/>
        <source>&amp;Low Resolution</source>
        <translation>저 해상도(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1348"/>
        <source>&amp;Normal Resolution</source>
        <translation>일반 해상도(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1349"/>
        <source>&amp;Full Resolution</source>
        <translation>최대 해상도(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1350"/>
        <source>Is PDF &amp;Bookmark</source>
        <translation>PDF 북마크(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1351"/>
        <source>Is PDF A&amp;nnotation</source>
        <translation>PDF 주석(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1352"/>
        <source>Annotation P&amp;roperties</source>
        <translation>주석 속성(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1353"/>
        <source>Field P&amp;roperties</source>
        <translation>필드 속성(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1354"/>
        <source>&amp;Edit Shape...</source>
        <translation>도형 편집(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1355"/>
        <source>&amp;Attach Text to Path</source>
        <translation>텍스트를 경로에 붙임(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1356"/>
        <source>&amp;Detach Text from Path</source>
        <translation>경로에서 텍스트를 분리함(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1357"/>
        <source>&amp;Combine Polygons</source>
        <translation>다각형 결합(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1358"/>
        <source>Split &amp;Polygons</source>
        <translation>다각형 분리(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1359"/>
        <source>&amp;Bezier Curve</source>
        <translation>베지어 곡선(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1360"/>
        <source>&amp;Image Frame</source>
        <translation>이미지 프레임(&amp;I)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Outlines</source>
        <translation type="obsolete">윤곽선(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1362"/>
        <source>&amp;Polygon</source>
        <translation>다각형(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1363"/>
        <source>&amp;Text Frame</source>
        <translation>텍스트 프레임(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1367"/>
        <source>&amp;Glyph...</source>
        <translation>사용자 문자표(&amp;G)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1368"/>
        <source>Sample Text</source>
        <translation>예제 텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1372"/>
        <source>&amp;Insert...</source>
        <translation>삽입(&amp;I)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1373"/>
        <source>Im&amp;port...</source>
        <translation>읽어오기(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1374"/>
        <source>&amp;Delete...</source>
        <translation>삭제(&amp;D)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1375"/>
        <source>&amp;Copy...</source>
        <translation>복사(&amp;C)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1376"/>
        <source>&amp;Move...</source>
        <translation>이동(&amp;M)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1377"/>
        <source>&amp;Apply Master Page...</source>
        <translation>마스터 페이지 적용(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1378"/>
        <source>Convert to Master Page...</source>
        <translation>마스터 페이지 변환...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1379"/>
        <source>Manage &amp;Guides...</source>
        <translation>안내선 설정(&amp;G)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1380"/>
        <source>Manage Page Properties...</source>
        <translation>페이지 속성 설정...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Fit in window</source>
        <translation type="obsolete">창 조정(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1385"/>
        <source>&amp;50%</source>
        <translation>&amp;50%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1386"/>
        <source>&amp;75%</source>
        <translation>&amp;75%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1387"/>
        <source>&amp;100%</source>
        <translation>&amp;100%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1388"/>
        <source>&amp;200%</source>
        <translation>&amp;200%</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Thumbnails</source>
        <translation type="obsolete">썸네일(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1391"/>
        <source>Show &amp;Margins</source>
        <translation>여백 보이기(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1393"/>
        <source>Show &amp;Frames</source>
        <translation>프레임 보이기(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1395"/>
        <source>Show &amp;Images</source>
        <translation>이미지 보이기(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1396"/>
        <source>Show &amp;Grid</source>
        <translation>격자 보이기(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1397"/>
        <source>Show G&amp;uides</source>
        <translation>안내선 보이기(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1399"/>
        <source>Show &amp;Baseline Grid</source>
        <translation>기준선 격자 보이기(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1400"/>
        <source>Show &amp;Text Chain</source>
        <translation>텍스트 체인 보이기(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1401"/>
        <source>Show Control Characters</source>
        <translation>제어문자 보이기</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1399"/>
        <source>Rulers relative to Page</source>
        <translation type="obsolete">페이지 관련 눈금자</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1404"/>
        <source>Sn&amp;ap to Grid</source>
        <translation>격자에 붙이기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1405"/>
        <source>Sna&amp;p to Guides</source>
        <translation>안내선에 붙이기(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1410"/>
        <source>&amp;Properties</source>
        <translation>속성 편집(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1412"/>
        <source>&amp;Scrapbook</source>
        <translation>스크랩북(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1413"/>
        <source>&amp;Layers</source>
        <translation>레이어(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1414"/>
        <source>&amp;Arrange Pages</source>
        <translation>페이지 배열(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1415"/>
        <source>&amp;Bookmarks</source>
        <translation>북마크(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1416"/>
        <source>&amp;Measurements</source>
        <translation>측정(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1417"/>
        <source>Action &amp;History</source>
        <translation>작업 내역(&amp;H)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1418"/>
        <source>Preflight &amp;Verifier</source>
        <translation>문서 검증(&amp;V)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1419"/>
        <source>&amp;Align and Distribute</source>
        <translation>정렬/배치(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1420"/>
        <source>&amp;Tools</source>
        <translation>도구(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1421"/>
        <source>P&amp;DF Tools</source>
        <translation>PDF 도구(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1424"/>
        <source>Select Item</source>
        <translation>객체 선택</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1351"/>
        <source>T&amp;able</source>
        <translation type="obsolete">표(&amp;A)</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1352"/>
        <source>&amp;Shape</source>
        <translation type="obsolete">도형(&amp;S)</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1354"/>
        <source>&amp;Line</source>
        <translation type="obsolete">선(&amp;L)</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1356"/>
        <source>&amp;Freehand Line</source>
        <translation type="obsolete">자유로운 선(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1425"/>
        <source>Rotate Item</source>
        <translation>객체 회전</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1426"/>
        <source>Zoom in or out</source>
        <translation>돋보기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1427"/>
        <source>Zoom in</source>
        <translation>확대</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1428"/>
        <source>Zoom out</source>
        <translation>축소</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1429"/>
        <source>Edit Contents of Frame</source>
        <translation>프레임 내용 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1430"/>
        <source>Edit Text...</source>
        <translation>텍스트 편집...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1431"/>
        <source>Link Text Frames</source>
        <translation>텍스트 프레임 링크</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1432"/>
        <source>Unlink Text Frames</source>
        <translation>텍스트 프레임 링크 해제</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1433"/>
        <source>&amp;Eye Dropper</source>
        <translation>색상 추출기(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1434"/>
        <source>Copy Item Properties</source>
        <translation>객체 속성 복사</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1368"/>
        <source>Edit the text with the Story Editor</source>
        <translation type="obsolete">스토리 편집기로 텍스트 편집</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1370"/>
        <source>Insert Text Frame</source>
        <translation type="obsolete">텍스트 프레임 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1371"/>
        <source>Insert Image Frame</source>
        <translation type="obsolete">이미지 프레임 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1372"/>
        <source>Insert Table</source>
        <translation type="obsolete">표 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1373"/>
        <source>Insert Shape</source>
        <translation type="obsolete">도형 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1374"/>
        <source>Insert Polygon</source>
        <translation type="obsolete">다각형 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1375"/>
        <source>Insert Line</source>
        <translation type="obsolete">선 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1376"/>
        <source>Insert Bezier Curve</source>
        <translation type="obsolete">베지어 곡선 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1377"/>
        <source>Insert Freehand Line</source>
        <translation type="obsolete">자유로운 선 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1412"/>
        <source>&amp;Manage Pictures</source>
        <translation type="obsolete">이미지 관리(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1457"/>
        <source>&amp;Hyphenate Text</source>
        <translation>하이픈 연결(&amp;H)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1458"/>
        <source>Dehyphenate Text</source>
        <translation>하이픈 연결 해제</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1459"/>
        <source>&amp;Generate Table Of Contents</source>
        <translation>목차 생성(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1462"/>
        <source>&amp;Cascade</source>
        <translation>계단식(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1463"/>
        <source>&amp;Tile</source>
        <translation>타일식(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1466"/>
        <source>&amp;About Scribus</source>
        <translation>Scribus에 대하여(&amp;A)</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1423"/>
        <source>&amp;About Plug-ins</source>
        <translation type="obsolete">플러그인에 대하여(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1468"/>
        <source>About &amp;Qt</source>
        <translation>Qt에 대하여(&amp;Q)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1469"/>
        <source>Toolti&amp;ps</source>
        <translation>도구설명(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1470"/>
        <source>Scribus &amp;Manual...</source>
        <translation>Scribus 메뉴얼(&amp;M)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1488"/>
        <source>Smart &amp;Hyphen</source>
        <translation>하이픈 능동적용(&amp;H)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1489"/>
        <source>Non Breaking Dash</source>
        <translation>개행없음 대시</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1490"/>
        <source>Non Breaking &amp;Space</source>
        <translation>개행없음 공백(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1491"/>
        <source>Page &amp;Number</source>
        <translation>페이지 번호(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1493"/>
        <source>New Line</source>
        <translation>새로운 줄</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1494"/>
        <source>Frame Break</source>
        <translation>프레임 개행</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1495"/>
        <source>Column Break</source>
        <translation>열 개행</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1498"/>
        <source>Copyright</source>
        <translation>저작권</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1499"/>
        <source>Registered Trademark</source>
        <translation>등록상표(R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1500"/>
        <source>Trademark</source>
        <translation>등록상표(T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1502"/>
        <source>Bullet</source>
        <translation>작은 점</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1504"/>
        <source>Em Dash</source>
        <translation>Em 대시</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1505"/>
        <source>En Dash</source>
        <translation>En 대시</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1506"/>
        <source>Figure Dash</source>
        <translation>숫자 대시</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1507"/>
        <source>Quotation Dash</source>
        <translation>인용 대시</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Apostrophe</source>
        <translation type="obsolete">어포스트로피</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1478"/>
        <source>Toggle Palettes</source>
        <translation>팔레트 전환</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1479"/>
        <source>Toggle Guides</source>
        <translation>안내선 전환</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Copy Contents</source>
        <translation type="obsolete">내용 복사</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Paste Contents</source>
        <translation type="obsolete">내용 붙여넣기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1271"/>
        <source>Paste (&amp;Absolute)</source>
        <translation>붙여넣기 (절대값)(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1272"/>
        <source>C&amp;lear</source>
        <translation>제거(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1282"/>
        <source>S&amp;tyles...</source>
        <translation>스타일(&amp;T)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1317"/>
        <source>&amp;Outline</source>
        <comment>type effect</comment>
        <translation>윤곽선(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1331"/>
        <source>&amp;Printing Enabled</source>
        <translation>인쇄 가능(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1332"/>
        <source>&amp;Flip Horizontally</source>
        <translation>수평 뒤집기(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1333"/>
        <source>&amp;Flip Vertically</source>
        <translation>수직 뒤집기(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1361"/>
        <source>&amp;Outlines</source>
        <comment>Convert to oulines</comment>
        <translation>윤곽선(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1402"/>
        <source>Show Rulers</source>
        <translation>눈금자 보기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1411"/>
        <source>&amp;Outline</source>
        <comment>Document Outline Palette</comment>
        <translation>문서 전체 윤곽(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1446"/>
        <source>Insert PDF Push Button</source>
        <translation>PDF 누름 버튼 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1447"/>
        <source>Insert PDF Text Field</source>
        <translation>PDF 텍스트 필드 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1448"/>
        <source>Insert PDF Check Box</source>
        <translation>PDF 체크 상자 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1449"/>
        <source>Insert PDF Combo Box</source>
        <translation>PDF 콤보 상자 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1450"/>
        <source>Insert PDF List Box</source>
        <translation>PDF 목록 상자 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1451"/>
        <source>Insert Text Annotation</source>
        <translation>텍스트 주석 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1452"/>
        <source>Insert Link Annotation</source>
        <translation>링크 주석 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1501"/>
        <source>Solidus</source>
        <translation>사선</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1503"/>
        <source>Middle Dot</source>
        <translation>중간 점</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1528"/>
        <source>En Space</source>
        <translation>En 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1529"/>
        <source>Em Space</source>
        <translation>Em 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1530"/>
        <source>Thin Space</source>
        <translation>좁은 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1531"/>
        <source>Thick Space</source>
        <translation>두터운 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1532"/>
        <source>Mid Space</source>
        <translation>중간 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1533"/>
        <source>Hair Space</source>
        <translation>헤어 공백</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1461"/>
        <source>Insert Smart Hyphen</source>
        <translation type="obsolete">능동 적용 하이픈 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1462"/>
        <source>Insert Non Breaking Dash</source>
        <translation type="obsolete">개행없음 대시 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1463"/>
        <source>Insert Non Breaking Space</source>
        <translation type="obsolete">개행없음 공백 삽입</translation>
    </message>
    <message>
        <location filename="../actionmanager.cpp" line="1464"/>
        <source>Insert Page Number</source>
        <translation type="obsolete">페이지 번호 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1545"/>
        <source>ff</source>
        <translation>ff</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1546"/>
        <source>fi</source>
        <translation>fi</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1547"/>
        <source>fl</source>
        <translation>fl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1548"/>
        <source>ffi</source>
        <translation>ffi</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1549"/>
        <source>ffl</source>
        <translation>ffl</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1550"/>
        <source>ft</source>
        <translation>ft</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1551"/>
        <source>st</source>
        <translation>st</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1255"/>
        <source>Save as &amp;EPS...</source>
        <translation>EPS 저장(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1398"/>
        <source>Show Text Frame Columns</source>
        <translation>텍스트 프레임 열 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1366"/>
        <source>&amp;Frame...</source>
        <translation>프레임(&amp;F)...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1390"/>
        <source>Preview Mode</source>
        <translation>미리보기 모드</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1394"/>
        <source>Show Layer Indicators</source>
        <translation>레이어 지시자 보기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1281"/>
        <source>Patterns...</source>
        <translation>색상표...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1339"/>
        <source>Send to Patterns</source>
        <translation>색상표에 저장</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1369"/>
        <source>Sticky Tools</source>
        <translation>스티키 도구</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1383"/>
        <source>&amp;Fit to Height</source>
        <translation>높이에 맞게(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1384"/>
        <source>Fit to Width</source>
        <translation>너비에 맞게</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1392"/>
        <source>Show Bleeds</source>
        <translation>물림재단 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1496"/>
        <source>&amp;Zero Width Space</source>
        <translation>0 너비 공백(&amp;Z)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1497"/>
        <source>Zero Width NB Space</source>
        <translation>0 너비 NB 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1509"/>
        <source>Apostrophe</source>
        <comment>Unicode 0x0027</comment>
        <translation>&apos;     0x0027삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1510"/>
        <source>Straight Double</source>
        <comment>Unicode 0x0022</comment>
        <translation>&quot;     0x0022삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1511"/>
        <source>Single Left</source>
        <comment>Unicode 0x2018</comment>
        <translation>‘     0x2018삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1512"/>
        <source>Single Right</source>
        <comment>Unicode 0x2019</comment>
        <translation>’     0x2019삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1513"/>
        <source>Double Left</source>
        <comment>Unicode 0x201C</comment>
        <translation>“     0x201C삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1514"/>
        <source>Double Right</source>
        <comment>Unicode 0x201D</comment>
        <translation>”     0x201D삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1515"/>
        <source>Single Reversed</source>
        <comment>Unicode 0x201B</comment>
        <translation>‛     0x201B삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1516"/>
        <source>Double Reversed</source>
        <comment>Unicode 0x201F</comment>
        <translation>``    0x201F삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1517"/>
        <source>Single Left Guillemet</source>
        <comment>Unicode 0x2039</comment>
        <translation>‹     0x2039삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1518"/>
        <source>Single Right Guillemet</source>
        <comment>Unicode 0x203A</comment>
        <translation>›     0x203A삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1519"/>
        <source>Double Left Guillemet</source>
        <comment>Unicode 0x00AB</comment>
        <translation>‹‹    0x00AB삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1520"/>
        <source>Double Right Guillemet</source>
        <comment>Unicode 0x00BB</comment>
        <translation>››    0x00BB삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1521"/>
        <source>Low Single Comma</source>
        <comment>Unicode 0x201A</comment>
        <translation>‚     0x201A삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1522"/>
        <source>Low Double Comma</source>
        <comment>Unicode 0x201E</comment>
        <translation>„     0x201E삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1523"/>
        <source>CJK Single Left</source>
        <comment>Unicode 0x300C</comment>
        <translation>왼쪽 따옴표</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1524"/>
        <source>CJK Single Right</source>
        <comment>Unicode 0x300D</comment>
        <translation>오른쪽 따옴표</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1525"/>
        <source>CJK Double Left</source>
        <comment>Unicode 0x300E</comment>
        <translation>왼쪽 이중 따옴표</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1526"/>
        <source>CJK Double Right</source>
        <comment>Unicode 0x300F</comment>
        <translation>오른쪽 이중 따옴표</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1389"/>
        <source>&amp;400%</source>
        <translation>&amp;400%</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1436"/>
        <source>Insert &amp;Text Frame</source>
        <translation>텍스트 프레임 삽입(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1437"/>
        <source>Insert &amp;Image Frame</source>
        <translation>이미지 프레임 삽입(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1439"/>
        <source>Insert T&amp;able</source>
        <translation>표 삽입(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1440"/>
        <source>Insert &amp;Shape</source>
        <translation>도형 삽입(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1441"/>
        <source>Insert &amp;Polygon</source>
        <translation>다각형 삽입(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1442"/>
        <source>Insert &amp;Line</source>
        <translation>선 삽입(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1443"/>
        <source>Insert &amp;Bezier Curve</source>
        <translation>베지어선 삽입(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1444"/>
        <source>Insert &amp;Freehand Line</source>
        <translation>자유로운 선 삽입(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1471"/>
        <source>Scribus Homepage</source>
        <translation>Scribus 홈페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1472"/>
        <source>Scribus Online Documentation</source>
        <translation>Scribus 온라인 문서</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1473"/>
        <source>Scribus Wiki</source>
        <translation>Scribus Wiki</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1474"/>
        <source>Getting Started with Scribus</source>
        <translation>Scribus 시작하기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1406"/>
        <source>Show Context Menu</source>
        <translation>문맥 메뉴 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1456"/>
        <source>&amp;Manage Images</source>
        <translation>이미지 관리(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1467"/>
        <source>&amp;About Plugins</source>
        <translation>플러그인에 대하여(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1480"/>
        <source>Insert Unicode Character Begin Sequence</source>
        <translation>Unicode문자 시작 순서 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1252"/>
        <source>Get Vector File...</source>
        <translation>벡터 파일 얻기...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1274"/>
        <source>Advanced Select All...</source>
        <translation>고급 객체 선택...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1278"/>
        <source>Edit Source...</source>
        <translation>소스 편집...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1280"/>
        <source>Replace Colors...</source>
        <translation>색상 치환...</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1403"/>
        <source>Rulers Relative to Page</source>
        <translation>페이지 관련 눈금자</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1438"/>
        <source>Insert &amp;Render Frame</source>
        <translation>렌더 프레임 삽입(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1475"/>
        <source>Check for Updates</source>
        <translation>업데이트 체크</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1492"/>
        <source>Number of Pages</source>
        <translation>페이지 총수</translation>
    </message>
    <message>
        <location filename="../../scribus/actionmanager.cpp" line="1345"/>
        <source>Adjust Image to Frame</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AdjustCmsDialog</name>
    <message>
        <location filename="../../scribus/adjustcmsdialog.cpp" line="16"/>
        <source>CMS Settings</source>
        <translation>CMS 설정</translation>
    </message>
</context>
<context>
    <name>AlignDistribute</name>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="35"/>
        <source>Align</source>
        <translation>정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="79"/>
        <source>&amp;Selected Guide:</source>
        <translation>선택된 안내선(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="92"/>
        <source>&amp;Relative To:</source>
        <translation>관계(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="431"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="270"/>
        <source>Distribute</source>
        <translation>배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.ui" line="490"/>
        <source>&amp;Distance:</source>
        <translation>거리(&amp;D):</translation>
    </message>
</context>
<context>
    <name>AlignDistributePalette</name>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="90"/>
        <source>Align and Distribute</source>
        <translation>정렬 및 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="91"/>
        <source>Align</source>
        <translation>정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="93"/>
        <source>&amp;Relative to:</source>
        <translation>기준(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="96"/>
        <source>First Selected</source>
        <translation>처음 선택된 것</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="97"/>
        <source>Last Selected</source>
        <translation>마지막 선택된 것</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="98"/>
        <source>Page</source>
        <translation>페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="99"/>
        <source>Margins</source>
        <translation>여백</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="100"/>
        <source>Guide</source>
        <translation>안내선</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="101"/>
        <source>Selection</source>
        <translation>선택</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Align right sides of objects to left side of anchor</source>
        <translation type="obsolete">객체 오른쪽에서 고정점 왼쪽면으로 정렬</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Align left sides of objects to right side of anchor</source>
        <translation type="obsolete">객체 왼쪽에서 고정점 오른쪽면으로 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="111"/>
        <source>Align bottoms</source>
        <translation>아래 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="113"/>
        <source>Align right sides</source>
        <translation>오른쪽 정렬</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Align tops of objects to bottom of anchor</source>
        <translation type="obsolete">객체 위에서 고정점 아래로 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="117"/>
        <source>Center on vertical axis</source>
        <translation>수직축 중앙</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="119"/>
        <source>Align left sides</source>
        <translation>왼쪽 면 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="121"/>
        <source>Center on horizontal axis</source>
        <translation>수평 축 중앙</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Align bottoms of objects to top of anchor</source>
        <translation type="obsolete">객체 아래에서 고정점 위로 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="125"/>
        <source>Align tops</source>
        <translation>위로 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="127"/>
        <source>&amp;Selected Guide:</source>
        <translation>선택된 안내선(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="92"/>
        <source>Distribute</source>
        <translation>배치</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Make horizontal gaps between objects equal</source>
        <translation type="obsolete">객체 사이 수평 간격을 동일하게</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Make horizontal gaps between objects equal to the value specified</source>
        <translation type="obsolete">객체 사이 수평 간격을 정한 값으로 동일하게</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="135"/>
        <source>Distribute right sides equidistantly</source>
        <translation>오른쪽 면에 등거리 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="137"/>
        <source>Distribute bottoms equidistantly</source>
        <translation>아래에 등거리 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="139"/>
        <source>Distribute centers equidistantly horizontally</source>
        <translation>수평으로 중앙 등거리 배치</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Make vertical gaps between objects equal</source>
        <translation type="obsolete">객체 사이 수직 간격을 동일하게</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Make vertical gaps between objects equal to the value specified</source>
        <translation type="obsolete">객체 사이 수직 간격을 정한 값으로 동일하게</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="145"/>
        <source>Distribute left sides equidistantly</source>
        <translation>왼쪽 면에 등거리 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="147"/>
        <source>Distribute centers equidistantly vertically</source>
        <translation>수직으로 중앙 등거리 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="149"/>
        <source>Distribute tops equidistantly</source>
        <translation>위에서 등거리 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="159"/>
        <source>&amp;Distance:</source>
        <translation>거리(&amp;D):</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="160"/>
        <source>Distribute the items with the distance specified</source>
        <translation>객체를 지정거리로 배치</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="162"/>
        <source>None Selected</source>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Warning</source>
        <translation type="obsolete">오류</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Some objects are locked.</source>
        <translation type="obsolete">몇 객체가 잠금.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Unlock All</source>
        <translation type="obsolete">전체 잠금 해제(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="443"/>
        <source>Y: %1%2</source>
        <translation>Y: %1%2</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="451"/>
        <source>X: %1%2</source>
        <translation>X: %1%2</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="107"/>
        <source>Align right sides of items to left side of anchor</source>
        <translation>객체의 오른쪽면을  고정점의 왼쪽면으로 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="109"/>
        <source>Align left sides of items to right side of anchor</source>
        <translation>객체 왼쪽면을 고정점의 오른쪽으로 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="115"/>
        <source>Align tops of items to bottom of anchor</source>
        <translation>객체의 위를 고정점 아래에 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="123"/>
        <source>Align bottoms of items to top of anchor</source>
        <translation>객체 아래를 고정점 상부에 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="130"/>
        <source>Make horizontal gaps between items equal</source>
        <translation>객체 사이 수평 간격을 주어진 값과 같게 만듦</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="132"/>
        <source>Make horizontal gaps between items equal to the value specified</source>
        <translation>객체 사이 수평 간격을 지정 값과 같게 만듦</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="141"/>
        <source>Make vertical gaps between items equal</source>
        <translation>객체 사이 수직 간격을 지정 값으로 만듦</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="143"/>
        <source>Make vertical gaps between items equal to the value specified</source>
        <translation>객체 사이 수직 간격을 정해진 값으로 만듦</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="151"/>
        <source>Make horizontal gaps between items and sides of page equal</source>
        <translation>객체과 페이지면 사이에 수평 간격이 같게</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="157"/>
        <source>Make vertical gaps between items and the top and bottom of page margins equal</source>
        <translation>객체과 페이지의 아래 윗쪽 사이 수직 간격이 같게</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="155"/>
        <source>Make horizontal gaps between items and sides of page margins equal</source>
        <translation>객체와 페이지면의 간격사이의 수평여백이 같게</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="153"/>
        <source>Make vertical gaps between items and the top and bottom of page equal</source>
        <translation>객체와 페이지의 아래윗쪽 사이 수직 간격이 같게</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="103"/>
        <source>&lt;qt&gt;Align relative to the:&lt;ul&gt;&lt;li&gt;First selected item&lt;/li&gt;&lt;li&gt;Second Selected Item&lt;/li&gt;&lt;li&gt;The current page&lt;/li&gt;&lt;li&gt;The margins of the current page&lt;/li&gt;&lt;li&gt;A Guide&lt;/li&gt;&lt;li&gt;The selection&lt;/ul&gt;&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;관련 정렬:&lt;ul&gt;&lt;li&gt;처음 선택된 객체&lt;/li&gt;&lt;li&gt;둘째 선택된 객체&lt;/li&gt;&lt;li&gt;현재 페이지&lt;/li&gt;&lt;li&gt;현재 페이지의 여백&lt;/li&gt;&lt;li&gt;안내선&lt;/li&gt;&lt;li&gt;선택&lt;/ul&gt;&lt;/qt&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/aligndistribute.cpp" line="105"/>
        <source>The location of the selected guide to align to</source>
        <translation>정렬하기 위한 선택 안내선의 위치</translation>
    </message>
</context>
<context>
    <name>AlignSelect</name>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="110"/>
        <source>Align Text Left</source>
        <translation>텍스트 왼쪽 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="111"/>
        <source>Align Text Right</source>
        <translation>텍스트 오른쪽 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="112"/>
        <source>Align Text Center</source>
        <translation>텍스트 중앙 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="113"/>
        <source>Align Text Justified</source>
        <translation>텍스트 양쪽 맞춤</translation>
    </message>
    <message>
        <location filename="../../scribus/alignselect.cpp" line="114"/>
        <source>Align Text Forced Justified</source>
        <translation>텍스트 강제 양쪽 맞춤</translation>
    </message>
</context>
<context>
    <name>Annot</name>
    <message>
        <location filename="../../scribus/annot.cpp" line="61"/>
        <source>Field Properties</source>
        <translation>필드 속성</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="533"/>
        <source>Type:</source>
        <translation>형태:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Button</source>
        <translation>단추</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Text Field</source>
        <translation>텍스트 필드</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Check Box</source>
        <translation>체크 상자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>Combo Box</source>
        <translation>콤보 상자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="96"/>
        <source>List Box</source>
        <translation>목록 상자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="111"/>
        <source>Properties</source>
        <translation>속성</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="121"/>
        <source>Name:</source>
        <translation>이름:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="274"/>
        <source>Text</source>
        <translation>텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="152"/>
        <source>Font for use with PDF 1.3:</source>
        <translation>PDF 1.3 사용하기 위한 글꼴:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="176"/>
        <source>Border</source>
        <translation>경계</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="182"/>
        <source>Color:</source>
        <translation>색상:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2087"/>
        <source>None</source>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="197"/>
        <source>Width:</source>
        <translation>너비:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="201"/>
        <source>Thin</source>
        <translation>좁음</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="311"/>
        <source>Normal</source>
        <translation>보통</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="201"/>
        <source>Wide</source>
        <translation>넓음</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="209"/>
        <source>Style:</source>
        <translation>형태:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="213"/>
        <source>Solid</source>
        <translation>실선</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="213"/>
        <source>Dashed</source>
        <translation>파선</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="213"/>
        <source>Underline</source>
        <translation>밑줄</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="214"/>
        <source>Beveled</source>
        <translation>빗금</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="214"/>
        <source>Inset</source>
        <translation>삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="224"/>
        <source>Other</source>
        <translation>기타</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="230"/>
        <source>Read Only</source>
        <translation>읽기만</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="236"/>
        <source>Required</source>
        <translation>필수</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="248"/>
        <source>Visibility:</source>
        <translation>가시성:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="252"/>
        <source>Visible</source>
        <translation>보임</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="252"/>
        <source>Hidden</source>
        <translation>숨김</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="252"/>
        <source>No Print</source>
        <translation>인쇄 안함</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="253"/>
        <source>No View</source>
        <translation>보기 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="262"/>
        <source>Appearance</source>
        <translation>외형</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="280"/>
        <source>Text for Button Down</source>
        <translation>단추 누르기 텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="283"/>
        <source>Text for Roll Over</source>
        <translation>말아올리기 텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="294"/>
        <source>Icons</source>
        <translation>아이콘</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="300"/>
        <source>Use Icons</source>
        <translation>아이콘 사용</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="357"/>
        <source>Remove</source>
        <translation>제거</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="329"/>
        <source>Pressed</source>
        <translation>누름</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="347"/>
        <source>Roll Over</source>
        <translation>말아 올리기</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="366"/>
        <source>Icon Placement...</source>
        <translation>아이콘 위치...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="414"/>
        <source>Highlight</source>
        <translation>강조</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>Invert</source>
        <translation>반전</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>Outlined</source>
        <translation>윤곽선</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>Push</source>
        <translation>밀기</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="438"/>
        <source>Multi-Line</source>
        <translation>다중선</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="442"/>
        <source>Password</source>
        <translation>암호</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="460"/>
        <source>Characters</source>
        <translation>문자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="466"/>
        <source>Do Not Scroll</source>
        <translation>스크롤 안함</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="470"/>
        <source>Do Not Spell Check</source>
        <translation>맞춤법 체크 안함</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="485"/>
        <source>Check Style:</source>
        <translation>스타일 체크:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Check</source>
        <translation>체크</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Cross</source>
        <translation>십자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Diamond</source>
        <translation>다이아몬드</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Circle</source>
        <translation>원</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Star</source>
        <translation>별</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="488"/>
        <source>Square</source>
        <translation>사각</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="514"/>
        <source>Editable</source>
        <translation>편집가능</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="521"/>
        <source>Options</source>
        <translation>설정</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2088"/>
        <source>JavaScript</source>
        <translation>자바스크립트</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2050"/>
        <source>Go To</source>
        <translation>이동</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2051"/>
        <source>Submit Form</source>
        <translation>전송 양식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2051"/>
        <source>Reset Form</source>
        <translation>양식 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2051"/>
        <source>Import Data</source>
        <translation>자료 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="570"/>
        <source>Event:</source>
        <translation>이벤트:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2030"/>
        <source>Mouse Up</source>
        <translation>마우스 위로</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2030"/>
        <source>Mouse Down</source>
        <translation>마우스 아래로</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2030"/>
        <source>Mouse Enter</source>
        <translation>마우스 엔터</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2031"/>
        <source>Mouse Exit</source>
        <translation>마우스 종료</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2031"/>
        <source>On Focus</source>
        <translation>초점</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2031"/>
        <source>On Blur</source>
        <translation>흐림</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="585"/>
        <source>Script:</source>
        <translation>자바스크립트:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1095"/>
        <source>Edit...</source>
        <translation>편집...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="670"/>
        <source>Submit to URL:</source>
        <translation>다음 URL로 전송:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="678"/>
        <source>Submit Data as HTML</source>
        <translation>자료를 HTML로 보내기</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="691"/>
        <source>Import Data from:</source>
        <translation>자료 들여오기:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="610"/>
        <source>Destination</source>
        <translation>출력대상</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="616"/>
        <source>To File:</source>
        <translation>파일로:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="623"/>
        <source>Change...</source>
        <translation>바꾸기...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="632"/>
        <source>Page:</source>
        <translation>페이지:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="646"/>
        <source>X-Pos:</source>
        <translation>X 위치:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="658"/>
        <source> pt</source>
        <translation> 포인트</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="654"/>
        <source>Y-Pos:</source>
        <translation>Y 위치:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="700"/>
        <source>Action</source>
        <translation>작업</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="731"/>
        <source>Field is formatted as:</source>
        <translation>필드 형식:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Plain</source>
        <translation>보통</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Number</source>
        <translation>숫자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Percentage</source>
        <translation>백분율</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Date</source>
        <translation>날짜</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Time</source>
        <translation>시간</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="734"/>
        <source>Custom</source>
        <translation>사용자</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="752"/>
        <source>Number Format</source>
        <translation>숫자 형식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="820"/>
        <source>Decimals:</source>
        <translation>십진법:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="775"/>
        <source>Use Currency Symbol</source>
        <translation>통화 기호 사용</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="784"/>
        <source>Prepend Currency Symbol</source>
        <translation>통화 기호 이전에 추가</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="831"/>
        <source>Formatting</source>
        <translation>형식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="811"/>
        <source>Percent Format</source>
        <translation>백분율 형식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="854"/>
        <source>Date Format</source>
        <translation>날짜 형식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="880"/>
        <source>Time Format</source>
        <translation>시간 형식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="902"/>
        <source>Custom Scripts</source>
        <translation>사용자 스크립트</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="914"/>
        <source>Format:</source>
        <translation>형식:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="940"/>
        <source>Keystroke:</source>
        <translation>키입력:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="964"/>
        <source>Format</source>
        <translation>형식</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="980"/>
        <source>Value is not validated</source>
        <translation>값이 유효하지 않습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="989"/>
        <source>Value must be greater than or equal to:</source>
        <translation>값이 크거나 같아야 합니다:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="993"/>
        <source>and less or equal to:</source>
        <translation>값이 적거나 같아야 합니다:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1004"/>
        <source>Custom validate script:</source>
        <translation>사용자 인증 스크립트:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1025"/>
        <source>Validate</source>
        <translation>인증</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1042"/>
        <source>Value is not calculated</source>
        <translation>값이 계산되지 않습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1051"/>
        <source>Value is the</source>
        <translation>값</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>sum</source>
        <translation>합계</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>product</source>
        <translation>곱</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>average</source>
        <translation>평균</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1056"/>
        <source>minimum</source>
        <translation>최소</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1057"/>
        <source>maximum</source>
        <translation>최대</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1064"/>
        <source>of the following fields:</source>
        <translation>다음 필드:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1074"/>
        <source>Pick...</source>
        <translation>추출...</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1079"/>
        <source>Custom calculation script:</source>
        <translation>사용자 계산 스크립트:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1099"/>
        <source>Calculate</source>
        <translation>계산</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1118"/>
        <source>OK</source>
        <translation>확인</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1122"/>
        <source>Cancel</source>
        <translation>취소</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1174"/>
        <source>Flag is ignored for PDF 1.3</source>
        <translation>플래그를 PDF 1.3에서 무시합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1175"/>
        <source>Enter a comma separated list of fields here</source>
        <translation>여기에 쉼표로 구분된 필드의 목록을 입력하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1176"/>
        <source>You need at least the Icon for Normal to use Icons for Buttons</source>
        <translation>버튼에 아이콘을 사용하려면 일반 아이콘이 적어도 필요합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2244"/>
        <source>Open</source>
        <translation>열기</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1453"/>
        <source>Example:</source>
        <translation>예제:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2079"/>
        <source>Selection Change</source>
        <translation>선택 변경</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2244"/>
        <source>PDF Files (*.pdf);;All Files (*)</source>
        <translation>PDF 파일 (*.pdf);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="421"/>
        <source>None</source>
        <comment>highlight</comment>
        <translation>강조</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="449"/>
        <source>Limit of</source>
        <translation>제한</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="502"/>
        <source>Default is Checked</source>
        <translation>기본값이 체크됨</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="2050"/>
        <source>None</source>
        <comment>action</comment>
        <translation>작업</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="134"/>
        <source>Tooltip:</source>
        <translation>도구설명:</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="242"/>
        <source>Do Not Export Value</source>
        <translation>내보내기 값이 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1342"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;PostScript (*.eps *.epsi);;All Files (*)</source>
        <translation>이미지 (*.tif *.png *.jpg *.xpm);;포스트스크립트 (*.eps *.epsi);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="1287"/>
        <source>Images (*.tif *.png *.jpg *.xpm);;%1;;All Files (*)</source>
        <translation>이미지 (*.tif *.png *.jpg *.xpm);;%1;;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annot.cpp" line="625"/>
        <source>Export absolute Filename</source>
        <translation>전체 파일 이름 내보내기</translation>
    </message>
</context>
<context>
    <name>Annota</name>
    <message>
        <location filename="../../scribus/annota.cpp" line="47"/>
        <source>Annotation Properties</source>
        <translation>주석 속성</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="77"/>
        <source>Text</source>
        <translation>텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="78"/>
        <source>Link</source>
        <translation>링크</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="79"/>
        <source>External Link</source>
        <translation>외부 링크</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="80"/>
        <source>External Web-Link</source>
        <translation>외부 웹-링크</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="82"/>
        <source>&amp;Type:</source>
        <translation>형태(&amp;T):</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="118"/>
        <source>Destination</source>
        <translation>출력방향</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="129"/>
        <source>C&amp;hange...</source>
        <translation>변경(&amp;H)...</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="147"/>
        <source>&amp;Page:</source>
        <translation>페이지(&amp;P):</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="177"/>
        <source> pt</source>
        <translation> 포인트</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="171"/>
        <source>&amp;X-Pos</source>
        <translation>&amp;X위치</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="179"/>
        <source>&amp;Y-Pos:</source>
        <translation>&amp;Y위치:</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="409"/>
        <source>Open</source>
        <translation>열기<byte value="x9"/></translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="409"/>
        <source>%1;;All Files (*)</source>
        <translation>%1;;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/annota.cpp" line="131"/>
        <source>Export absolute Filename</source>
        <translation>전체 파일명 내보내기</translation>
    </message>
</context>
<context>
    <name>ApplyMasterPageDialog</name>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="267"/>
        <source>Apply Master Page</source>
        <translation>마스터 페이지 적용</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="268"/>
        <source>&amp;Master Page:</source>
        <translation>마스터 페이지(&amp;M):</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="269"/>
        <source>Apply To</source>
        <translation>적용 대상</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="270"/>
        <source>Current &amp;page</source>
        <translation>현재 페이지(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="271"/>
        <source>Alt+P</source>
        <translation>Alt+P</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="272"/>
        <source>&amp;Even pages</source>
        <translation>짝수 페이지(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="273"/>
        <source>Alt+E</source>
        <translation>Alt+E</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="274"/>
        <source>O&amp;dd pages</source>
        <translation>홀수 페이지(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="275"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="276"/>
        <source>&amp;All pages</source>
        <translation>전체 페이지(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="277"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="278"/>
        <source>&amp;Within range</source>
        <translation>범위내(&amp;W)</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="279"/>
        <source>Alt+W</source>
        <translation>Alt+W</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="283"/>
        <source>Alt+O</source>
        <translation>Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="285"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="280"/>
        <source>Apply the selected master page to even, odd or all pages within the following range</source>
        <translation>선택한 마스터 페이지를 다음 범위 내의 짝수, 홀수, 전체 페이지에 적용합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="281"/>
        <source>to</source>
        <translation>로</translation>
    </message>
    <message>
        <location filename="../../scribus/applytemplatedialog.cpp" line="52"/>
        <source>Possible Hyphenation</source>
        <translation>이용가능한 하이픈</translation>
    </message>
</context>
<context>
    <name>ArrowChooser</name>
    <message>
        <location filename="" line="0"/>
        <source>None</source>
        <translation type="obsolete">없음</translation>
    </message>
</context>
<context>
    <name>AspellPlugin</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="63"/>
        <source>Spell-checking support</source>
        <translation>맞춤법 검사 지원</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="68"/>
        <source>Adds support for spell-checking via aspell. Languages can be chosen from among the installed aspell dictionaries, and spell-checking can be done on the fly, or on selected text.</source>
        <translation>aspell을 통하여 맞춤법 검사 지원을 더합니다. 언어를 설치된 aspell 사전 중에서 선택할 수 있습니다 , 그리고 즉시 또는 선택한 텍스트상에서 맞춤법 검사를 수행할 수 있습니다 .</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="69"/>
        <source>0.1</source>
        <translation>0.1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellplugin.cpp" line="31"/>
        <source>Spell Checker</source>
        <translation>맞춤법 검사기</translation>
    </message>
</context>
<context>
    <name>AspellPluginBase</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="13"/>
        <source>Spell Check</source>
        <translation>맞춤법 검사</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Mis-spelling:</source>
        <translation type="obsolete">오류-단어:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="118"/>
        <source>Replacement:</source>
        <translation>치환:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Active dictionary: </source>
        <translation type="obsolete">활성 사전: </translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Personal
Dictionary</source>
        <translation type="obsolete">개인 
<byte value="x9"/>  사전</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="278"/>
        <source>&amp;Add Word</source>
        <translation>단어 더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="306"/>
        <source>&amp;Change</source>
        <translation>변경(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C&amp;hange All</source>
        <translation type="obsolete">전체 변경(&amp;H)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Skip</source>
        <translation type="obsolete">건너뛰기(&amp;S)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>S&amp;kip All</source>
        <translation type="obsolete">전체 건너뛰기(&amp;K)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Exit</source>
        <translation type="obsolete">종료(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="45"/>
        <source>Not in Dictionary:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="70"/>
        <source>Word that was not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="125"/>
        <source>Replacement text for the current word that was not found in the dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="181"/>
        <source>Active Dictionary: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="194"/>
        <source>The currently active dictionary. Scribus uses aspell for dictionary support.&lt;br /&gt;If you require updated or more dictionaries, you should install them via your system&apos;s installation system or package manager.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="225"/>
        <source>Ignore the current text not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="228"/>
        <source>&amp;Ignore</source>
        <translation type="unfinished">무시(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="247"/>
        <source>Ignore all occurrences of the current text not found in the active dictionary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="250"/>
        <source>I&amp;gnore All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="275"/>
        <source>Add the current word to the your personal spelling dictionary for future use</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="303"/>
        <source>Change the current word that was not found to that shown in the replacement entry field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="331"/>
        <source>Change all occurrences of the current word in the text that was not found to that shown in the replacement entry field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="334"/>
        <source>Change A&amp;ll</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginbase.ui" line="372"/>
        <source>Close</source>
        <translation type="unfinished">닫기</translation>
    </message>
</context>
<context>
    <name>AspellPluginImpl</name>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
        <source>Loaded </source>
        <translation>읽어오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
        <source>default </source>
        <translation>기본값</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="31"/>
        <source> aspell dictionary.</source>
        <translation> aspell 사전.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="58"/>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in aspell speller configuration.</source>
        <translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): aspell speller 설정 오류.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="65"/>
        <source>aspellplugin (AspellPluginImpl::AspellPluginImpl): Error in creating aspell speller.</source>
        <translation>aspellplugin (AspellPluginImpl::AspellPluginImpl): aspell speller 생성시 오류.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Spell-Checker</source>
        <translation type="obsolete">맞춤법 검사기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Spell-checking completed.</source>
        <translation type="obsolete">맞춤법 검사 완료.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Spell-checking done.</source>
        <translation type="obsolete">맞춤법 검사 종료</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="316"/>
        <source>AspellPluginImpl::on_fskipAllBtn_clicked(): Unable to skip all instances of &quot;</source>
        <translation>AspellPluginImpl::on_fskipAllBtn_clicked(): 전체 경우를 생략할 수 없음 &quot;</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="317"/>
        <source> by adding it to the session list.</source>
        <translation>세션 목록으로 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="339"/>
        <source>AspellPluginImpl::on_faddWordBtn_clicked(): Unable to add word to personal list.</source>
        <translation>AspellPluginImpl::on_faddWordBtn_clicked(): 단어를 개인 목록에 더할 수 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="197"/>
        <source>Spelling check complete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/spellcheck/aspellpluginimpl.cpp" line="198"/>
        <source>Spell Checker</source>
        <translation type="unfinished">맞춤법 검사기</translation>
    </message>
</context>
<context>
    <name>AutoformButtonGroup</name>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1280"/>
        <source>Arrows</source>
        <translation>화살표</translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1281"/>
        <source>Flow Chart</source>
        <translation>플로우 차트</translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1282"/>
        <source>Jigsaw</source>
        <translation>퍼즐</translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1283"/>
        <source>Specials</source>
        <translation>기타</translation>
    </message>
    <message>
        <location filename="../../scribus/autoformbuttongroup.cpp" line="1279"/>
        <source>Default Shapes</source>
        <translation>기본 도형</translation>
    </message>
</context>
<context>
    <name>Barcode</name>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="39"/>
        <source>Scribus frontend for Pure Postscript Barcode Writer</source>
        <translation>순수한 Postscript 바코드 작성자를 위한 Scribus 프런트 엔드</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcode.cpp" line="22"/>
        <source>&amp;Barcode...</source>
        <translation>바코드(&amp;B)...</translation>
    </message>
</context>
<context>
    <name>BarcodeGenerator</name>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="41"/>
        <source>12 or 13 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="43"/>
        <source>8 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="45"/>
        <source>11 or 12 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="47"/>
        <source>7 or 8 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="49"/>
        <source>5 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="51"/>
        <source>2 digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="54"/>
        <source>12 or 13 digits with dashes. The legacy ISBN-10 format accepts 9 or 10 digits with dashes, but this standard was depreciated for public use after 1st January 2007. (Note: To convert an old ISBN-10 to a new ISBN-13, prefix 978- to the first 9 digits, e.g. 1-56592-479-7 -&gt; 978-1-56592-479. The final check-digit will be calculated automatically.)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="58"/>
        <source>Variable number of characters, digits and any of the symbols -. *$/+%.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="67"/>
        <source>Variable number of ASCII characters and special function symbols, starting with the appropriate start character for the initial character set. UCC/EAN-128s must have a mandatory FNC 1 symbol immediately following the start character.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="70"/>
        <source>Variable number of digits and any of the symbols -$:/.+ABCD.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="93"/>
        <source>Variable number of digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="78"/>
        <source>Variable number of digits. An ITF-14 is 14 characters and does not have a check digit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="89"/>
        <source>Variable number of digits and capital letters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="98"/>
        <source>Variable number of hexadecimal characters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="105"/>
        <source>Select Type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="145"/>
        <source>Select Barcode Type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="315"/>
        <source>Error opening file: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.cpp" line="349"/>
        <source>Barcode incomplete</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>BarcodeGeneratorBase</name>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="152"/>
        <source>&amp;Type:</source>
        <translation>형태(&amp;T):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="132"/>
        <source>Co&amp;de:</source>
        <translation>코드(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="145"/>
        <source>Select one of the available barcode type here</source>
        <translation>이용가능한 바코드를 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="125"/>
        <source>The numeric representation of the code itself. See the help message below</source>
        <translation>코드의 수치 표현. 아래 도움 메세지를 보시오</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="115"/>
        <source>Reset the barcode samples</source>
        <translation>바코드 예제 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="90"/>
        <source>&amp;Include text in barcode</source>
        <translation>바코드에서 텍스트 포함</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="93"/>
        <source>Alt+I</source>
        <translation>Alt+I</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="87"/>
        <source>If checked, there will be numbers in the barcode too</source>
        <translation>체크시, 바코드는 숫자이어야 합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="77"/>
        <source>&amp;Guard whitespace</source>
        <translation>공백 보기(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="80"/>
        <source>Alt+G</source>
        <translation>Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="74"/>
        <source>Draw arrows to be sure of space next the code</source>
        <translation>다음 코드 공백을 확인하기 위한 화살표 그립니다</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="64"/>
        <source>I&amp;nclude checksum</source>
        <translation>체크섬 포함(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="67"/>
        <source>Alt+N</source>
        <translation>Alt+N</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="61"/>
        <source>Generate and include a checksum in barcode</source>
        <translation>바코드에 체크섬 생성 및 포함</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="51"/>
        <source>Incl&amp;ude checksum digit</source>
        <translation>체크섬 디지트 포함(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="54"/>
        <source>Alt+U</source>
        <translation>Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="48"/>
        <source>Include the checksum digit in the barcode text</source>
        <translation>바코드 텍스트에서 체크섬 digit를 포함합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="168"/>
        <source>Colors</source>
        <translation>색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="208"/>
        <source>&amp;Background</source>
        <translation>배경(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="211"/>
        <source>Alt+B</source>
        <translation>Alt+B</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="205"/>
        <source>Background color - under the code lines</source>
        <translation>배경 색상 - 코드 선 아래</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="240"/>
        <source>&amp;Lines</source>
        <translation>선(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="243"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="237"/>
        <source>Color of the lines in barcode</source>
        <translation>바코드 선 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="272"/>
        <source>&amp;Text</source>
        <translation>텍스트(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="275"/>
        <source>Alt+T</source>
        <translation>Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="269"/>
        <source>Color of the text and numbers</source>
        <translation>텍스트와 수치 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="304"/>
        <source>Hints and help is shown here</source>
        <translation>힌트와 도움말이 여기에서 보여집니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="314"/>
        <source>Preview of the result. 72dpi sample.</source>
        <translation>출력 미리보기, 72dpi 샘플</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="15"/>
        <source>Insert Barcode</source>
        <translation>바코드 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/barcodegenerator/barcodegenerator.ui" line="24"/>
        <source>Format</source>
        <translation>형식</translation>
    </message>
</context>
<context>
    <name>Biblio</name>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="837"/>
        <source>Rename</source>
        <translation>다른 이름으로</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="839"/>
        <source>Delete</source>
        <translation>삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1444"/>
        <source>Scrapbook</source>
        <translation>스크랩북</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1120"/>
        <source>Name &quot;%1&quot; is not unique.
Please choose another.</source>
        <translation>이름 &quot;%1&quot;이 이미 있습니다.
다른 이름을 선택하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1344"/>
        <source>Object</source>
        <translation>객체</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
        <source>&amp;Name:</source>
        <translation>이름(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1257"/>
        <source>New Entry</source>
        <translation>새 객체</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="698"/>
        <source>Choose a Scrapbook Directory</source>
        <translation>스크랩북 사전 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="737"/>
        <source>Choose a scrapbook file to import</source>
        <translation>들여오기 위하여 스크랩북 파일 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="759"/>
        <source>Choose a Directory</source>
        <translation>사전 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1445"/>
        <source>Create a new scrapbook page</source>
        <translation>새 스크랩북 페이지 생성</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1446"/>
        <source>Load an existing scrapbook</source>
        <translation>기존 스크랩북 읽어오기</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1447"/>
        <source>Save the selected scrapbook</source>
        <translation>선택된 스크랩북 저장</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1448"/>
        <source>Import an scrapbook file from Scribus &lt;=1.3.2</source>
        <translation>Scribus 1.3.2로 부터 스크랩북 파일을 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1449"/>
        <source>Close the selected scrapbook</source>
        <translation>선택된 스크랩북 닫기</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="844"/>
        <source>Copy To:</source>
        <translation>복사:</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="845"/>
        <source>Move To:</source>
        <translation>이동:</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="560"/>
        <source>Main</source>
        <translation>메인</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="562"/>
        <source>Copied Items</source>
        <translation>복사된 객체</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1113"/>
        <source>New Name</source>
        <translation>새 이름:</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="739"/>
        <source>Scrapbook (*.scs *.SCS)</source>
        <translation>스크랩북 (*.scs *.SCS)</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="833"/>
        <source>Paste to Page</source>
        <translation>페이지에 붙여넣기</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="889"/>
        <source>Save as...</source>
        <translation>다른 이름으로 저장...</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="892"/>
        <source>Close</source>
        <translation>닫기</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="895"/>
        <source>Delete Contents</source>
        <translation>내용 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/scrapbookpalette.cpp" line="1068"/>
        <source>Do you really want to delete all entries?</source>
        <translation>정말 전체 객체를 삭제하시겠습니까?</translation>
    </message>
</context>
<context>
    <name>BookMView</name>
    <message>
        <location filename="" line="0"/>
        <source>Move Bookmark</source>
        <translation type="obsolete">북마크 이동</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Insert Bookmark</source>
        <translation type="obsolete">북마크 삽입</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Cancel</source>
        <translation type="obsolete">취소</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Bookmarks</source>
        <translation type="obsolete">북마크</translation>
    </message>
</context>
<context>
    <name>BookPalette</name>
    <message>
        <location filename="../../scribus/bookmarkpalette.cpp" line="51"/>
        <source>Bookmarks</source>
        <translation>북마크</translation>
    </message>
</context>
<context>
    <name>ButtonIcon</name>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="29"/>
        <source>Icon Placement</source>
        <translation>아이콘 위치이동</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="38"/>
        <source>Layout:</source>
        <translation>배치:</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Caption only</source>
        <translation>자막만</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Icon only</source>
        <translation>아이콘만</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Caption below Icon</source>
        <translation>아이콘 아래 자막</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="41"/>
        <source>Caption above Icon</source>
        <translation>아이콘 위 자막</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="42"/>
        <source>Caption right to Icon</source>
        <translation>아이콘 오른쪽 자막</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="42"/>
        <source>Caption left to Icon</source>
        <translation>아이콘 왼쪽 자막</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="50"/>
        <source>Scale:</source>
        <translation>비율:</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="55"/>
        <source>Always</source>
        <translation>항상</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="55"/>
        <source>When Icon is too small</source>
        <translation>아이콘이 너무 작을 때</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="56"/>
        <source>When Icon is too big</source>
        <translation>아이콘이 너무 클 때</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="56"/>
        <source>Never</source>
        <translation>결코 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="63"/>
        <source>Scale How:</source>
        <translation>비율 크기:</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="66"/>
        <source>Proportional</source>
        <translation>비례</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="67"/>
        <source>Non Proportional</source>
        <translation>비례 아님</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="90"/>
        <source>Icon</source>
        <translation>아이콘</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="117"/>
        <source>OK</source>
        <translation>확인</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="121"/>
        <source>Cancel</source>
        <translation>취소</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="124"/>
        <source>Reset</source>
        <translation>초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/buttonicon.cpp" line="42"/>
        <source>Caption overlays Icon</source>
        <translation>아이콘과 자막 겹침</translation>
    </message>
</context>
<context>
    <name>CMSPrefs</name>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="69"/>
        <source>Perceptual</source>
        <translation>지각</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="69"/>
        <source>Relative Colorimetric</source>
        <translation>상대 색상계</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="70"/>
        <source>Saturation</source>
        <translation>채도</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefs.cpp" line="70"/>
        <source>Absolute Colorimetric</source>
        <translation>절대 색상계</translation>
    </message>
</context>
<context>
    <name>CMSPrefsBase</name>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="19"/>
        <source>Form</source>
        <translation>양식</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="40"/>
        <source>&amp;Activate Color Management</source>
        <translation>색상 관리 활성화(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="50"/>
        <source>System Profiles</source>
        <translation>시스템 프로파일</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="74"/>
        <source>&amp;RGB Images:</source>
        <translation>RGB 이미지(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="90"/>
        <source>Default color profile for imported RGB images</source>
        <translation>들여오는 RGB 이미지를 위한 기본 색상 프로파일</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="97"/>
        <source>&amp;CMYK Images:</source>
        <translation>CMYK 이미지(&amp;C):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="113"/>
        <source>Default color profile for imported CMYK images</source>
        <translation>들여오는 CMYK 이미지를 위한 기본 색상 프로파일</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="120"/>
        <source>&amp;RGB Solid Colors:</source>
        <translation>RGB 단일 색상(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="136"/>
        <source>Default color profile for solid RGB colors on the page</source>
        <translation>페이지상에서 단색 RGB 색상의 기본 색상 프로파일</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="143"/>
        <source>&amp;CMYK Solid Colors:</source>
        <translation>CMY 단일색(&amp;C):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="159"/>
        <source>Default color profile for solid CMYK colors on the page</source>
        <translation>페이지상에서 단일색 CMYK 색상의 기본 색상 프로파일</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="166"/>
        <source>&amp;Monitor:</source>
        <translation>모니터(&amp;M):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="182"/>
        <source>Color profile that you have generated or received from the manufacturer.
This profile should be specific to your monitor and not a generic profile (i.e. sRGB).</source>
        <translation>자신이 만든 또는 제조 업체에서받은 색상 프로필. 
이 프로필은 모니터 특유의 것이며, 일반 프로필(예 sRGB)이 아닙니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="190"/>
        <source>P&amp;rinter:</source>
        <translation>프린터(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="206"/>
        <source>Color profile for your printer model from the manufacturer.
This profile should be specific to your printer and not a generic profile (i.e. sRGB).</source>
        <translation>제조 업체에서 발행되는 프린터 모델에 맞는 색상 프로필. 
이 프로필은 프린터 특유의 것이며, 일반 프로필(예 sRGB)이 아닙니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="220"/>
        <source>Rendering Intents</source>
        <translation>렌더링 목적</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="244"/>
        <source>Images:</source>
        <translation>이미지:</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="260"/>
        <source>Default rendering intent for images. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation>이미지를 위한 기본 렌더링 목적. 변경하는 이유를 알 수없는 경우, 
상대적인 색상계 또는 지각을 선택하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="268"/>
        <source>Sol&amp;id Colors:</source>
        <translation>단일 색상(&amp;I):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="284"/>
        <source>Default rendering intent for solid colors. Unless you know why to change it,
Relative Colorimetric or Perceptual should be chosen.</source>
        <translation>단일 색상을 위한 기본 렌더링 목적. 변경하는 이유를 알 수없는 경우, 
상대적인 색채계 또는 지각을 선택하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="298"/>
        <source>Enable &apos;soft proofing&apos; of how your document colors will print,
based on the chosen printer profile.</source>
        <translation>선택한 프린터 프로필을 기반으로, 문서 색상을 어떻게 인쇄하는가는 &apos;soft - proofing&apos;를 사용.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="302"/>
        <source>Sim&amp;ulate Printer on the Screen</source>
        <translation>화면상 프린터 시뮬레이션(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="329"/>
        <source>Simulate a full color managed environment :
all colors, rgb or cmyk, are converted to printer color space.</source>
        <translation>전체 색상 관리 환경 시뮬레이션 :
rgb 또는 cmyk 전체 색상을 프린터 색상 공간으로 변환합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="333"/>
        <source>Convert all colors to printer space</source>
        <translation>전체 색상을 프린터 색상공간으로 변환</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="340"/>
        <source>Method of showing colors on the screen which may not print properly.
This requires very accurate profiles and serves only as a warning.</source>
        <translation>적절히 출력되지 않는 화면상에서 색상을 나타내는 방법.
이것은 매우 정확한 프로파일이 필요하고 단지 경고를 합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="344"/>
        <source>Mark Colors out of &amp;Gamut</source>
        <translation>범위 밖 생상 표시(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="357"/>
        <source>Black Point Compensation is a method of improving contrast in photos.
It is recommended that you enable this if you have photos in your document.</source>
        <translation>흑점 보정은 사진 명암을 개선하는 방법입니다. 
문서 중 사진이 있는 경우, 이것의 사용을 추천합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmsprefsbase.ui" line="361"/>
        <source>Use &amp;Blackpoint Compensation</source>
        <translation>흑점 보정 사용(&amp;B)</translation>
    </message>
</context>
<context>
    <name>CMYKChoose</name>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="92"/>
        <source>Edit Color</source>
        <translation>색상 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="101"/>
        <source>&amp;Name:</source>
        <translation>이름(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="111"/>
        <source>Color &amp;Model</source>
        <translation>색상 모델(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="910"/>
        <source>CMYK</source>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="915"/>
        <source>RGB</source>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="768"/>
        <source>Web Safe RGB</source>
        <translation>Web Safe RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="125"/>
        <source>Is Spot Color</source>
        <translation>Spot 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="141"/>
        <source>New</source>
        <translation>새로운 색</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="158"/>
        <source>Old</source>
        <translation>이전 색</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>HSV-Colormap</source>
        <translation type="obsolete">HSV-색상도</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="709"/>
        <source>C:</source>
        <translation>C(남색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="708"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="710"/>
        <source>M:</source>
        <translation>M(자홍색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="711"/>
        <source>Y:</source>
        <translation>Y(노란색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="345"/>
        <source>K:</source>
        <translation>K(검은색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="442"/>
        <source>Dynamic Color Bars</source>
        <translation>동적 색상 막대</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="440"/>
        <source>Static Color Bars</source>
        <translation>정적 색상 막대</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="753"/>
        <source>R:</source>
        <translation>R(적색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="754"/>
        <source>G:</source>
        <translation>G(녹색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="755"/>
        <source>B:</source>
        <translation>B(청색):</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="1006"/>
        <source>You cannot create a color named &quot;%1&quot;.
It is a reserved name for transparent color</source>
        <translation>&quot;%1&quot;라는 색상을 생성할 수 없습니다. 
투명 색상명으로 예약되었습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="1015"/>
        <source>The name of the color already exists,
please choose another one.</source>
        <translation>색상 이름이 이미 있습니다,
다른 이름을 선택하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="388"/>
        <source>Choosing this will make this color a spot color, thus creating another spot when creating plates or separations. This is used most often when a logo or other color needs exact representation or cannot be replicated with CMYK inks. Metallic and fluorescent inks are good examples which cannot be easily replicated with CMYK inks.</source>
        <translation> 이것을 선택하는 것은 이 색상을 spot 색상으로 만들며, 평판이나 분리를 생성시킬 때 다른 spot을 생성시킵니다. 이것은 로고 또는 다른 색상을 정확하게 나타낼 때 자주 사용되며, 즉 CMYK 잉크로 복사될 수 없습니다. 메탈릭 또는 형광 잉크는 CMYK 잉크로 쉽게 복사할 수 없는 좋은 예입니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="789"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. More hints about gamut warnings are in the online help under Color Management.</source>
        <translation>색상관리를 할 수 있다면, 삼각형 경고 표시는 색상이 현재 선택된 프린터 프로파일의 색상범위 밖에 있다는 경고입니다. 이 의미는 화면상에서 보이는 것을 정확하게 색상을 출력할 수 없음을 의미합니다. 온라인 도움말 색상관리 부분에서 경고에 대한 더 많은 정보를 얻을 수 있습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="999"/>
        <source>You cannot create a color without a name
Please give it a name</source>
        <translation>이름이 없이 색상을 생성할 수 없습니다
<byte value="x9"/>  이름을 부여하시오</translation>
    </message>
    <message>
        <location filename="../../scribus/cmykfw.cpp" line="196"/>
        <source>HSV Color Map</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CStyleP</name>
    <message>
        <location filename="../smcstylew.ui" line="13"/>
        <source>Form1</source>
        <translation type="obsolete">양식1</translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="49"/>
        <source>Based On:</source>
        <translation type="obsolete">근거:</translation>
    </message>
    <message>
        <location filename="../smcstylew.ui" line="109"/>
        <source>Colors</source>
        <translation type="obsolete">색상</translation>
    </message>
</context>
<context>
    <name>CStylePBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Colors</source>
        <translation type="obsolete">색상</translation>
    </message>
</context>
<context>
    <name>CWDialog</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="15"/>
        <source>Color Wheel</source>
        <translation>색상 판</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="47"/>
        <source>Click the wheel to get the base color. Its color model depends on the chosen tab.</source>
        <translation>기본 색상을 얻기 위해 색상 판을 클릭합니다. 색상 모델은 선택된 탭에 의존합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="54"/>
        <source>Result Colors</source>
        <translation>출력 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="311"/>
        <source>CMYK</source>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="532"/>
        <source>RGB</source>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="718"/>
        <source>HSV</source>
        <translation>HSV</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="108"/>
        <source>Colors of your chosen color scheme.</source>
        <translation>선택한 색상 체계의 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="118"/>
        <source>Color Scheme Method</source>
        <translation>색상 체계 방법</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="144"/>
        <source>Angle:</source>
        <translation>각도:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="154"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation>선택한 값과 다른 것 사이의 차이. 자세한 내용은 문서를 참조하십시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="169"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation>색상 체계를 생성하는 방법을 선택. 자세한 정보는 문서를 참조하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="203"/>
        <source>Merge created colors into the document colors</source>
        <translation>생성된 색상을 문서 색상으로 병합</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="206"/>
        <source>&amp;Merge</source>
        <translation>병합(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="209"/>
        <source>Alt+M</source>
        <translation>Alt+M</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="216"/>
        <source>Replace created colors in the document colors</source>
        <translation>문서 색상에서 생성 색깔을 치환</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="219"/>
        <source>&amp;Replace</source>
        <translation>치환(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="222"/>
        <source>Alt+R</source>
        <translation>Alt+R</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="229"/>
        <source>Leave colors untouched</source>
        <translation>손대지 않은 색상을 남겨둠</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="232"/>
        <source>&amp;Cancel</source>
        <translation>취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="235"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="244"/>
        <source>Preview:</source>
        <translation>미리보기:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="268"/>
        <source>Sample color scheme.</source>
        <translation>예제 색상 체계.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="287"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation>일반 시력결손을 시험함. 시력 결손 형태를 선택하시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="294"/>
        <source>Vision Defect Type:</source>
        <translation>색맹 형태:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="331"/>
        <source>C:</source>
        <translation>C(남색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="431"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="361"/>
        <source>M:</source>
        <translation>M(자홍색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="391"/>
        <source>Y:</source>
        <translation>Y(노란색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="421"/>
        <source>K:</source>
        <translation>K(검은색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="827"/>
        <source>RGB:</source>
        <translation>RGB:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="674"/>
        <source>HSV:</source>
        <translation>HSV:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="560"/>
        <source>R:</source>
        <translation>R(적색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="587"/>
        <source>G:</source>
        <translation>G(녹색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="614"/>
        <source>B:</source>
        <translation>B(청색):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="863"/>
        <source>CMYK:</source>
        <translation>CMYK:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="746"/>
        <source>H:</source>
        <translation>H(색조):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="773"/>
        <source>S:</source>
        <translation>S(채도):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="800"/>
        <source>V:</source>
        <translation>V(명암):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.ui" line="907"/>
        <source>Document</source>
        <translation>문서</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="319"/>
        <source>Merging colors</source>
        <translation type="unfinished">색상 병합 중</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
        <source>Error: </source>
        <translation type="unfinished">오류: </translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="325"/>
        <source>Color %1 exists already!</source>
        <translation type="unfinished">색상 %1이 이미 있습니다!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="330"/>
        <source>Color %1 appended.</source>
        <translation type="unfinished">상 %1을 첨가합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="334"/>
        <source>Now opening the color manager.</source>
        <translation type="unfinished">색상 관리자 여는 중</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="337"/>
        <source>Color Merging</source>
        <translation type="unfinished">색상 병합</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/cwdialog.cpp" line="488"/>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation type="unfinished">요청받은 색상을 찾을 수 없습니다. 검정, 회색 또는 흰색을 선택하여야 합니다. 이 색상에 처리할 방법이 없습니다.</translation>
    </message>
</context>
<context>
    <name>CWDialogBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Color Wheel</source>
        <translation type="obsolete">색상판</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>CMYK</source>
        <translation type="obsolete">CMYK</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C:</source>
        <translation type="obsolete">C(남색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>M:</source>
        <translation type="obsolete">M(자홍색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Y:</source>
        <translation type="obsolete">Y(노란색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>K:</source>
        <translation type="obsolete">K(검은색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>RGB:</source>
        <translation type="obsolete">RGB:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>RGB</source>
        <translation type="obsolete">RGB</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>R:</source>
        <translation type="obsolete">R(적색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>G:</source>
        <translation type="obsolete">G(녹색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>B:</source>
        <translation type="obsolete">B(청색):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>CMYK:</source>
        <translation type="obsolete">CMYK:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Document</source>
        <translation type="obsolete">문서</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="obsolete">색상 스킴을 생성하기 위하여 방법을 선택합니다. 더 자세한 정보는 문서를 참조하세요</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Angle:</source>
        <translation type="obsolete">각도:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="obsolete">선택된 값과 센 값과의 차이. 자세한 정보는 문서를 참조.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Preview:</source>
        <translation type="obsolete">미리보기:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Vision Defect Type:</source>
        <translation type="obsolete">색맹 형태:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Merge created colors into the document colors</source>
        <translation type="obsolete">생성된 색상을 문서색상로 병합</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Replace created colors in the document colors</source>
        <translation type="obsolete">생성된 색상을 문서 색상로 치환</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Leave colors untouched</source>
        <translation type="obsolete">손대지 않은 색상을 남겨둠.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="obsolete">여기에서 일반적인 색맹형태를 모의시험합니다. 색맹 형태를 선택하시오.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
</context>
<context>
    <name>ChTable</name>
    <message>
        <location filename="" line="0"/>
        <source>You can see a thumbnail if you press
and hold down the right mouse button

The Insert key inserts a Glyph into the Selection below
and the Delete key removes the last inserted one</source>
        <translation type="obsolete">오른쪽 마우스 버튼을 누르고 있으면 썸네일을 볼 수 있습니다.
<byte value="x9"/>
삽입키는 사용자문자를 아래 선택으로 삽입하고 삭제키는 마지막 삽입된 것을 제거합니다.</translation>
    </message>
</context>
<context>
    <name>CharSelect</name>
    <message>
        <location filename="../../scribus/charselect.ui" line="100"/>
        <source>Font:</source>
        <translation>글꼴:</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="123"/>
        <source>Character Class:</source>
        <translation>문자 종류:</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="203"/>
        <source>&amp;Insert</source>
        <translation>삽입(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="213"/>
        <source>C&amp;lear</source>
        <translation>제거(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="200"/>
        <source>Insert the characters at the cursor in the text</source>
        <translation>텍스트에서 커서위치에 문자를 입력</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="210"/>
        <source>Delete the current selection(s).</source>
        <translation>현재 선택을 삭제합니다.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button. The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="obsolete">오른쪽 마우스 버튼을 계속 누르고 있으면 썸네일을 볼 수 있습니다. 삽입키는 사용자 문자표를 선택된 곳 아래에 삽입하며 삭제키는 마지막 삽입된 그림문자를 삭제합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="88"/>
        <source>Enhanced Palette</source>
        <translation>사용자 문자표</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="19"/>
        <source>Quick Palette</source>
        <translation>문자 빨리 찾기</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="13"/>
        <source>Character Palette</source>
        <translation>문자 팔레트</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="30"/>
        <source>Hide/Show Enhanced Palette</source>
        <translation>사용자 문자표 숨기기/보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="38"/>
        <source>Scribus Char Palette (*.ucp);;All Files (*)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="250"/>
        <source>Full Character Set</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="255"/>
        <source>Basic Latin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="261"/>
        <source>Latin-1 Supplement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="267"/>
        <source>Latin Extended-A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="273"/>
        <source>Latin Extended-B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="279"/>
        <source>General Punctuation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="285"/>
        <source>Super- and Subscripts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="291"/>
        <source>Currency Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="297"/>
        <source>Letterlike Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="303"/>
        <source>Number Forms</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="309"/>
        <source>Arrows</source>
        <translation type="unfinished">화살표</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="315"/>
        <source>Mathematical Operators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="321"/>
        <source>Box Drawing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="327"/>
        <source>Block Elements</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="333"/>
        <source>Geometric Shapes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="339"/>
        <source>Miscellaneous Symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="345"/>
        <source>Dingbats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="351"/>
        <source>Small Form Variants</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="357"/>
        <source>Ligatures</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="363"/>
        <source>Specials</source>
        <translation type="unfinished">기타</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="369"/>
        <source>Greek</source>
        <translation type="unfinished">그리스어</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="375"/>
        <source>Greek Extended</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="381"/>
        <source>Cyrillic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="387"/>
        <source>Cyrillic Supplement</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="393"/>
        <source>Arabic</source>
        <translation type="unfinished">아라비아어</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="399"/>
        <source>Arabic Extended A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="405"/>
        <source>Arabic Extended B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="411"/>
        <source>Hebrew</source>
        <translation type="unfinished">헤브루어</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="584"/>
        <source>Choose a filename to open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="648"/>
        <source>Error</source>
        <translation type="unfinished">오류</translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="611"/>
        <source>Error reading file %1 - file is corrupted propably.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="625"/>
        <source>Save Quick Character Palette</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="649"/>
        <source>Cannot write file %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="657"/>
        <source>Empty the Palette?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.cpp" line="658"/>
        <source>You will remove all characters from this palette. Are you sure?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/charselect.ui" line="152"/>
        <source>You can see a thumbnail if you press and hold down the right mouse button.
The Insert key inserts a Glyph into the Selection below and the Delete key removes the last inserted one</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CharStyleComboBox</name>
    <message>
        <location filename="../../scribus/spalette.cpp" line="118"/>
        <source>No Style</source>
        <translation>스타일 없음</translation>
    </message>
</context>
<context>
    <name>CharTable</name>
    <message>
        <location filename="" line="0"/>
        <source>Delete</source>
        <translation type="obsolete">삭제</translation>
    </message>
</context>
<context>
    <name>CharTableView</name>
    <message>
        <location filename="../../scribus/chartableview.cpp" line="22"/>
        <source>Delete</source>
        <translation>삭제</translation>
    </message>
</context>
<context>
    <name>CheckDocument</name>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="877"/>
        <source>Glyphs missing</source>
        <translation>사용자 문자표 빠짐</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="878"/>
        <source>Text overflow</source>
        <translation>텍스트 오버플로우</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="879"/>
        <source>Object is not on a Page</source>
        <translation>객체가 페이지에 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="880"/>
        <source>Missing Image</source>
        <translation>이미지 빠짐</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="884"/>
        <source>Object has transparency</source>
        <translation>객체가 투명도를 가짐</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="885"/>
        <source>Object is a PDF Annotation or Field</source>
        <translation>객체가 PDF 주석이나 필드임</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="886"/>
        <source>Object is a placed PDF</source>
        <translation>객체가 배치된 PDF입니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="250"/>
        <source>Document</source>
        <translation>문서</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="254"/>
        <source>No Problems found</source>
        <translation>문제가 없습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="656"/>
        <source>Page </source>
        <translation>페이지 </translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="837"/>
        <source>Free Objects</source>
        <translation>자유 객체</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="843"/>
        <source>Problems found</source>
        <translation>문제가 발견되었습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="863"/>
        <source>Preflight Verifier</source>
        <translation>문서 검증</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="865"/>
        <source>Items</source>
        <translation>객체</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="866"/>
        <source>Problems</source>
        <translation>문제</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="869"/>
        <source>Current Profile:</source>
        <translation>현재 프로파일:</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="870"/>
        <source>&amp;Ignore Errors</source>
        <translation>오류 무시(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="871"/>
        <source>Check again</source>
        <translation>다시 체크</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="882"/>
        <source>Image resolution below %1 DPI, currently %2 x %3 DPI</source>
        <translation>이미지 해상도가 1 % DPI 미만, 현재 2 % x % 3 DPI입니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="883"/>
        <source>Image resolution above %1 DPI, currently %2 x %3 DPI</source>
        <translation>이미지 해상도가 1 % DPI 이상, 현재 2 % x % 3 DPI입니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="887"/>
        <source>Image is GIF</source>
        <translation>GIF 이미지 입니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="255"/>
        <source>OK</source>
        <translation>확인</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="276"/>
        <source>Transparency used</source>
        <translation>투명도 사용 중</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="279"/>
        <source>Blendmode used</source>
        <translation>혼합모드 사용 중</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="286"/>
        <source>Layer &quot;%1&quot;</source>
        <translation>레이어 &quot;%1&quot;</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="888"/>
        <source>Annotation uses a non TrueType font</source>
        <translation>주석에서 TrueType 글꼴이 아닌 것이 사용합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="873"/>
        <source>Preflight profile to base the report generation on. Options can be set in Document Setup or Preferences</source>
        <translation>문서 프로필을 기초로 보고서를 생성합니다. 옵션은 문서 설치나 기본설정을 설정할 수 있습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="874"/>
        <source>Ignore found errors and continue to export or print. Be sure to understand the errors you are ignoring before continuing.</source>
        <translation>오류 발견을 무시하고 내보내기 또는 출력을 계속합니다. 계속 하기 전 무시한 오류를 확인하시요.</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="875"/>
        <source>Rerun the document scan to check corrections you may have made</source>
        <translation>정정을 체그하기 이하여 문서 스캔을 재 실행합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/checkDocument.cpp" line="881"/>
        <source>Empty Image Frame</source>
        <translation>빈 이미지 프레임</translation>
    </message>
</context>
<context>
    <name>ChooseStyles</name>
    <message>
        <location filename="../editformats.cpp" line="95"/>
        <source>Choose Styles</source>
        <translation type="obsolete">스타일 선택</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="100"/>
        <source>Available Styles</source>
        <translation type="obsolete">이용가능한 스타일</translation>
    </message>
</context>
<context>
    <name>CollectForOutput</name>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="52"/>
        <source>Choose a Directory</source>
        <translation>폴더 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="68"/>
        <source>Collecting...</source>
        <translation>수집 중...</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="87"/>
        <source>Cannot collect the file: 
%1</source>
        <translation>파일을 수집할 수 없습니다:
%1</translation>
    </message>
    <message>
        <location filename="../../scribus/collect4output.cpp" line="73"/>
        <source>Cannot collect all files for output for file:
%1</source>
        <translation>출력 파일로 전체 파일을 모을 수 없습니다:
%1</translation>
    </message>
</context>
<context>
    <name>ColorManager</name>
    <message>
        <location filename="../../scribus/colorm.cpp" line="54"/>
        <source>Colors</source>
        <translation>색상</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="80"/>
        <source>&amp;Import</source>
        <translation>들여오기(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="82"/>
        <source>&amp;New</source>
        <translation>새 파일(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="84"/>
        <source>&amp;Edit</source>
        <translation>편집(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="88"/>
        <source>D&amp;uplicate</source>
        <translation>복제(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="91"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="96"/>
        <source>&amp;Remove Unused</source>
        <translation>사용하지 않는 것 삭제(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="103"/>
        <source>Color Sets</source>
        <translation>색상 모음</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="109"/>
        <source>Current Color Set:</source>
        <translation>현재 색상 모음:</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="140"/>
        <source>&amp;Save Color Set</source>
        <translation>색상 모음 저장(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="159"/>
        <source>Choose a color set to load</source>
        <translation>읽어오는 색상 모음 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="160"/>
        <source>Save the current color set</source>
        <translation>현재 색상 모음 저장</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="165"/>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation>현재 문서의 색상 모음에서 사용되지 않은 색상을 제거합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="167"/>
        <source>Import colors to the current set from an existing document</source>
        <translation>기존 문서에서 현재 색상 설정에 색상 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="168"/>
        <source>Create a new color within the current set</source>
        <translation>현재 설정 사이에 새로운 색상을 생성합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="169"/>
        <source>Edit the currently selected color</source>
        <translation>현재 선택된 색상 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="170"/>
        <source>Make a copy of the currently selected color</source>
        <translation>현재 선택된 색상의 사본 생성</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="171"/>
        <source>Delete the currently selected color</source>
        <translation>현재 선택된 색상 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="172"/>
        <source>Make the current colorset the default color set</source>
        <translation>현재 색상 모음을 기본 색상 모음으로 만듦니다</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="190"/>
        <source>&amp;Name:</source>
        <translation>이름(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="190"/>
        <source>Choose a Name</source>
        <translation>새 이름 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="362"/>
        <source>Copy of %1</source>
        <translation>%1 복사</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="373"/>
        <source>New Color</source>
        <translation>새 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="330"/>
        <source>Information</source>
        <translation>정보</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Import</source>
        <translation type="obsolete">들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="330"/>
        <source>The file %1 does not contain colors which can be imported.
If the file was a PostScript-based, try to import it with File -&amp;gt; Import. 
Not all files have DSC conformant comments where the color descriptions are located.
 This prevents importing colors from some files.
See the Edit Colors section of the documentation for more details.</source>
        <translation>% 1 파일을 가져올 수있는 색상을 포함하지 않습니다. 
이 파일이 포스트 스크립트 기반이라면, 파일을 읽어오려고 할 것입니다 - &amp;&gt; 읽어오기. 
모든 파일이 색상 설명이 위치한 DSC 준수 의견을 가지지 않습니다. 
 이것은 몇몇 파일로부터 색상을 읽어오는 것을 금지합니다. 
더 자세한 내용은 문서 색상 섹션의 편집부분을 참조하십시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="173"/>
        <source>If color management is enabled, a triangle warning indicator is a warning that the color maybe outside of the color gamut of the current printer profile selected. What this means is the color may not print exactly as indicated on screen. Spot colors are indicated by a red circle. More hints about gamut warnings are in the online help under Color Management. Registration colors will have a registration mark next to the color. Use Registration only for printers marks and crop marks.</source>
        <translation>색상 관리가 활성화 된다면 삼각형의 경고 지시자는 현재 선택된 프린터의 색상 범위 밖을 의미하는 것입니다. 이는  색상이 화면상에서 나타나는 것과 같이 정확히 출력이 되지 않은 것입니다. Spot 색상이 적색원으로 나타납니다.범위 오류에 대한 더 자세한 내용은 색상 관리부분에서 온라인 도움말이 있습니다. 등록색상은  등록마크 옆에 있는 색상을 가질 것입니다. 프린터 마크와 잘림 마크를 위한 등록을 사용합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="320"/>
        <source>All Supported Formats (%1);;Documents (%2);;Other Files (%3);;All Files (*)</source>
        <translation>전체 지원 형식 (%1);;문서 (%2);;기타 파일 (%3);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/colorm.cpp" line="321"/>
        <source>Import Colors</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorWheel</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="139"/>
        <source>Monochromatic</source>
        <translation>단일색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="140"/>
        <source>Analogous</source>
        <translation>유사색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="224"/>
        <source>Complementary</source>
        <translation>보색</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="142"/>
        <source>Split Complementary</source>
        <translation>분열 보색</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="143"/>
        <source>Triadic</source>
        <translation>3색</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="144"/>
        <source>Tetradic (Double Complementary)</source>
        <translation>3색 (이중 보색)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="44"/>
        <source>Base Color</source>
        <translation>기본 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="206"/>
        <source>Monochromatic Light</source>
        <translation>밝은 단일색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="209"/>
        <source>Monochromatic Dark</source>
        <translation>어두운 단일색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="216"/>
        <source>1st. Analogous</source>
        <translation>첫째 유사색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="217"/>
        <source>2nd. Analogous</source>
        <translation>둘째 유사색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="231"/>
        <source>1st. Split</source>
        <translation>첫째 분열 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="232"/>
        <source>2nd. Split</source>
        <translation>둘째 분열 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="233"/>
        <source>3rd. Split</source>
        <translation>셋째 분열 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="234"/>
        <source>4th. Split</source>
        <translation>네째 분열 색상</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="241"/>
        <source>1st. Triadic</source>
        <translation>첫째 3색</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="242"/>
        <source>2nd. Triadic</source>
        <translation>둘째 3색</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="249"/>
        <source>1st. Tetradic (base opposite)</source>
        <translation>첫째 3색 (기본 반대)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="250"/>
        <source>2nd. Tetradic (angle)</source>
        <translation>둘째 3색(각도)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheelwidget.cpp" line="251"/>
        <source>3rd. Tetradic (angle opposite)</source>
        <translation>세째 3색(각도 반대)</translation>
    </message>
</context>
<context>
    <name>ColorWheelDialog</name>
    <message>
        <location filename="" line="0"/>
        <source>Cr&amp;eate color...</source>
        <translation type="obsolete">색상 생성(&amp;E)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Import existing color...</source>
        <translation type="obsolete">기존 색상 들여오기(&amp;I)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Merge colors</source>
        <translation type="obsolete">색상 병합(&amp;M)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Replace colors</source>
        <translation type="obsolete">색상 치환(&amp;R)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>E&amp;xit</source>
        <translation type="obsolete">종료(&amp;X)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C&amp;olor</source>
        <translation type="obsolete">색상(&amp;O)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Normal Vision</source>
        <translation type="obsolete">정상 시력</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Protanopia (red)</source>
        <translation type="obsolete">색맹 (적)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Deuteranopia (green)</source>
        <translation type="obsolete">색맹 (녹)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Tritanopia (blue)</source>
        <translation type="obsolete">색맹 (청)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Full Color Blindness</source>
        <translation type="obsolete">완전 색맹</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Vision Defect:</source>
        <translation type="obsolete">색맹:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Saturation:</source>
        <translation type="obsolete">채도:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Value:</source>
        <translation type="obsolete">명암:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Color Wheel</source>
        <translation type="obsolete">색상판</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Color</source>
        <translation type="obsolete">색상</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Name</source>
        <translation type="obsolete">이름</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C</source>
        <translation type="obsolete">C(남색)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>M</source>
        <translation type="obsolete">M(자홍색)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Y</source>
        <translation type="obsolete">Y(노랑색)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>K</source>
        <translation type="obsolete">K(검은색)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Select Method:</source>
        <translation type="obsolete">선택 방법:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Angle (0 - 90 degrees):</source>
        <translation type="obsolete">각도 (0 -90 도):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Merge Colors</source>
        <translation type="obsolete">색상 병합(&amp;M)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Replace Colors</source>
        <translation type="obsolete">색상 치환(&amp;R)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Merge created colors into the document colors</source>
        <translation type="obsolete">생성된 색상을 문서 색상으로 병합</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Replace created colors in the document colors</source>
        <translation type="obsolete">문서 색상을 생성 색상으로 치환</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Leave colors untouched</source>
        <translation type="obsolete">손대지 않은 색상을 남겨둠</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Difference between the selected value and the counted ones. Refer to documentation for more information.</source>
        <translation type="obsolete">선택된 값과 센 값과의 차이. 자세한 정보는 문서를 참조</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Saturation component in HSV mode</source>
        <translation type="obsolete">HSV 모드에서 채도 요소</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Value component in HSV mode</source>
        <translation type="obsolete">HSV 모드에서 명암요소</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Click the wheel to get the base color. It is hue in HSV mode.</source>
        <translation type="obsolete">기본색상을 얻기 위해 색상판을 클릭. HSV모드에서 색조임</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Sample color scheme</source>
        <translation type="obsolete">샘플 색상 스킴</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Select one of the methods to create a color scheme. Refer to documentation for more information.</source>
        <translation type="obsolete">색상 스키카를 생성하기 위하여 방법을 선택합니다. 더 자사한 정보는 문서를 참조하세요</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Colors of your chosen color scheme</source>
        <translation type="obsolete">선택 색상 스킴 색상</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Simulate common vision defects here. Select type of the defect.</source>
        <translation type="obsolete">여기에서 일반 색맹을 모의시험합니다. 색명 형태를 선택하세요..</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Merging colors</source>
        <translation type="obsolete">색상 병합 중</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Error: </source>
        <translation type="obsolete">오류: </translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Color %1 exists already!</source>
        <translation type="obsolete">색상 %1이 이미 있습니다!</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Color %1 appended.</source>
        <translation type="obsolete">상 %1을 첨가합니다.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Now opening the color manager.</source>
        <translation type="obsolete">색상 관리자 여는 중</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Color Merging</source>
        <translation type="obsolete">색상 병합</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>New Color</source>
        <translation type="obsolete">새 색상</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Unable to find the requested color. You have probably selected black, gray or white. There is no way to process this color.</source>
        <translation type="obsolete">요청받은 색상을 찾을 수 없습니다. 검정, 회색 또는 흰색을 선택하여야 합니다. 이 색상에 처리할 방법이 없습니다.</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C&amp;olor Components...</source>
        <translation type="obsolete">요소(&amp;O)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Protanopia (Red)</source>
        <translation type="obsolete">색맹 (적)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Deuteranopia (Green)</source>
        <translation type="obsolete">색맹 (녹)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Tritanopia (Blue)</source>
        <translation type="obsolete">색맹 (청)</translation>
    </message>
</context>
<context>
    <name>ColorWheelPlugin</name>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="47"/>
        <source>&amp;Color Wheel...</source>
        <translation>색상판(&amp;C)...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="64"/>
        <source>Color setting helper</source>
        <translation>색상 설정 도우미</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/colorwheel/colorwheel.cpp" line="65"/>
        <source>Color selector with color theory included.</source>
        <translation>색상 이론을 포함하는 색상 선택기</translation>
    </message>
</context>
<context>
    <name>CommonStrings</name>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="244"/>
        <source>&amp;Apply</source>
        <translation>적용(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="247"/>
        <source>&amp;Cancel</source>
        <translation>취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="250"/>
        <source>None</source>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="254"/>
        <source>&amp;OK</source>
        <translation>확인(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="257"/>
        <source>&amp;Save</source>
        <translation>저장(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="260"/>
        <source>Warning</source>
        <translation>경고</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="251"/>
        <source>None</source>
        <comment>color name</comment>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="285"/>
        <source>Custom</source>
        <comment>CommonStrings, custom page size</comment>
        <translation>사용자 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="291"/>
        <source>Single Page</source>
        <translation>한 쪽</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="292"/>
        <source>Double Sided</source>
        <translation>두 쪽</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="293"/>
        <source>3-Fold</source>
        <translation>세 쪽</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="294"/>
        <source>4-Fold</source>
        <translation>네 쪽</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Left Page</source>
        <translation type="obsolete">왼쪽 페이지</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Middle</source>
        <translation type="obsolete">중앙 페이지</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Middle Left</source>
        <translation type="obsolete">중앙 왼쪽 페이지</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Middle Right</source>
        <translation type="obsolete">중앙 오른쪽 페이지</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Right Page</source>
        <translation type="obsolete">오른쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="330"/>
        <source>Monday</source>
        <translation>월요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="331"/>
        <source>Tuesday</source>
        <translation>화요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="332"/>
        <source>Wednesday</source>
        <translation>수요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="333"/>
        <source>Thursday</source>
        <translation>목요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="334"/>
        <source>Friday</source>
        <translation>금요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="335"/>
        <source>Saturday</source>
        <translation>토요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="336"/>
        <source>Sunday</source>
        <translation>일요일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="337"/>
        <source>January</source>
        <translation>1월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="338"/>
        <source>February</source>
        <translation>2월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="339"/>
        <source>March</source>
        <translation>3월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="340"/>
        <source>April</source>
        <translation>4월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="341"/>
        <source>May</source>
        <translation>5월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="342"/>
        <source>June</source>
        <translation>6월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="343"/>
        <source>July</source>
        <translation>6월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="344"/>
        <source>August</source>
        <translation>8월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="345"/>
        <source>September</source>
        <translation>9월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="346"/>
        <source>October</source>
        <translation>10월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="347"/>
        <source>November</source>
        <translation>11월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="348"/>
        <source>December</source>
        <translation>12월</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="262"/>
        <source>Yes</source>
        <translation>예</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="263"/>
        <source>No</source>
        <translation>아니오</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="264"/>
        <source>&amp;Yes</source>
        <translation>예(&amp;Y)</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="265"/>
        <source>&amp;No</source>
        <translation>아니오(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="301"/>
        <source>Left Page</source>
        <comment>Left page location</comment>
        <translation>왼쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="302"/>
        <source>Middle</source>
        <comment>Middle page location</comment>
        <translation>중앙 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="303"/>
        <source>Middle Left</source>
        <comment>Middle Left page location</comment>
        <translation>중앙 왼쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="304"/>
        <source>Middle Right</source>
        <comment>Middle Right page location</comment>
        <translation>중앙 오른쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="305"/>
        <source>Right Page</source>
        <comment>Right page location</comment>
        <translation>오른쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="308"/>
        <source>Normal</source>
        <comment>Default single master page</comment>
        <translation>기본 한 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="310"/>
        <source>Normal Left</source>
        <comment>Default left master page</comment>
        <translation>기본 왼쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="312"/>
        <source>Normal Middle</source>
        <comment>Default middle master page</comment>
        <translation>기본 중앙 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="314"/>
        <source>Normal Right</source>
        <comment>Default right master page</comment>
        <translation>기본 오른쪽 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="356"/>
        <source>Normal Vision</source>
        <comment>Color Blindness - Normal Vision</comment>
        <translation>정상 시력</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="357"/>
        <source>Protanopia (Red)</source>
        <comment>Color Blindness - Red Color Blind</comment>
        <translation>적색 이상</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="358"/>
        <source>Deuteranopia (Green)</source>
        <comment>Color Blindness - Greed Color Blind</comment>
        <translation>녹색 이상</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="359"/>
        <source>Tritanopia (Blue)</source>
        <comment>Color Blindness - Blue Color Blind</comment>
        <translation>청색 이상</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="360"/>
        <source>Full Color Blindness</source>
        <comment>Color Blindness - Full Color Blindness</comment>
        <translation>전 색상 색맹</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="362"/>
        <source>Custom: </source>
        <comment>Custom Tab Fill Option</comment>
        <translation>사용자 탭 설정: </translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="316"/>
        <source>Solid Line</source>
        <translation>실선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="317"/>
        <source>Dashed Line</source>
        <translation>대시선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="318"/>
        <source>Dotted Line</source>
        <translation>점선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="319"/>
        <source>Dash Dot Line</source>
        <translation>대시점선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="320"/>
        <source>Dash Dot Dot Line</source>
        <translation>대시점점선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="364"/>
        <source>None</source>
        <comment>Optical Margin Setting</comment>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="365"/>
        <source>Left Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation>왼쪽 돌출</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="366"/>
        <source>Right Protruding</source>
        <comment>Optical Margin Setting</comment>
        <translation>오른쪽 돌출</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="367"/>
        <source>Left Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation>왼쪽 문장 부호</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="368"/>
        <source>Right Hanging Punctuation</source>
        <comment>Optical Margin Setting</comment>
        <translation>오른쪽 문장 부호</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="369"/>
        <source>Default</source>
        <comment>Optical Margin Setting</comment>
        <translation>기본값</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="372"/>
        <source>Min. Word Tracking</source>
        <translation>최소 단어 찾기</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="373"/>
        <source>Max. Word Tracking</source>
        <translation>최대 단어 찾기</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="376"/>
        <source>Min. Glyph Extension</source>
        <translation>최소 사용자 문자표 확장</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="377"/>
        <source>Max. Glyph Extension</source>
        <translation>최대 사용자 문자표 확장</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="350"/>
        <source>RGB</source>
        <comment>Colorspace</comment>
        <translation>RGB</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="351"/>
        <source>CMYK</source>
        <comment>Colorspace</comment>
        <translation>CMYK</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="352"/>
        <source>Grayscale</source>
        <comment>Colorspace</comment>
        <translation>회색톤</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="353"/>
        <source>Duotone</source>
        <comment>Colorspace</comment>
        <translation>2색조</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="354"/>
        <source>Unknown</source>
        <comment>Colorspace (Unknown)</comment>
        <translation>미정</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="381"/>
        <source>PostScript</source>
        <translation>포스트스크립트</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="267"/>
        <source>Text Frame</source>
        <translation>텍스트 프레임</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="268"/>
        <source>Image Frame</source>
        <translation>이미지 프레임</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="269"/>
        <source>Line</source>
        <translation>선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="270"/>
        <source>Polygon</source>
        <translation>다각형</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="271"/>
        <source>Polyline</source>
        <translation>다수 선</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="272"/>
        <source>Text on a Path</source>
        <translation>경로상 텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="274"/>
        <source>Multiple</source>
        <comment>Multiple frame types</comment>
        <translation>다수 프레임 형태</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="275"/>
        <source>PDF Push Button</source>
        <translation>PDF 밀기 단추</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="276"/>
        <source>PDF Text Field</source>
        <translation>PDF 텍스트 필드</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="277"/>
        <source>PDF Check Box</source>
        <translation>PDF 체크상자</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="278"/>
        <source>PDF Combo Box</source>
        <translation>PDF 콤보상자</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="279"/>
        <source>PDF List Box</source>
        <translation>PDF 목록상자</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="280"/>
        <source>PDF Text Annotation</source>
        <translation>PDF 텍스트 주석</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="281"/>
        <source>PDF Link Annotation</source>
        <translation>PDF 링크 주석</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="388"/>
        <source>PostScript Level 1</source>
        <translation>포스트스크립트 레벨 1</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="390"/>
        <source>PostScript Level 2</source>
        <translation>포스트스크립트 레벨 2</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="392"/>
        <source>PostScript Level 3</source>
        <translation>포스트스크립트 레벨 3</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="394"/>
        <source>Windows GDI</source>
        <translation>Windows GDI</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="273"/>
        <source>Render Frame</source>
        <translation>렌더 프레임</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="325"/>
        <source>Default Paragraph Style</source>
        <translation>기본 문단 스타일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="326"/>
        <source>Default Character Style</source>
        <translation>기본 문자 스타일</translation>
    </message>
    <message>
        <location filename="../../scribus/commonstrings.cpp" line="327"/>
        <source>Default Line Style</source>
        <translation>기본 선 스타일</translation>
    </message>
</context>
<context>
    <name>ContextMenu</name>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="202"/>
        <source>Preview Settings</source>
        <translation>미리보기 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="413"/>
        <source>Paste File...</source>
        <translation>파일 붙여넣기...</translation>
    </message>
    <message>
        <location filename="../../scribus/contextmenu.cpp" line="446"/>
        <source>Delete Page</source>
        <translation>페이지 삭제</translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageBase</name>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="16"/>
        <source>Convert Page to Master Page</source>
        <translation>페이지를 마스터 페이지로 변환</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="24"/>
        <source>Name:</source>
        <translation>이름:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpage.ui" line="39"/>
        <source>Copy Applied Master Page Items</source>
        <translation>적용된 마스터 페이지 객체 복사</translation>
    </message>
</context>
<context>
    <name>CopyPageToMasterPageDialog</name>
    <message>
        <location filename="../../scribus/ui/copypagetomasterpagedialog.cpp" line="18"/>
        <source>New Master Page %1</source>
        <translation>새 마스터 페이지 %1</translation>
    </message>
</context>
<context>
    <name>Cpalette</name>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="982"/>
        <source> pt</source>
        <translation> 포인트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="983"/>
        <source> %</source>
        <translation> 퍼센트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="999"/>
        <source>Shade:</source>
        <translation>음영:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1000"/>
        <source>Opacity:</source>
        <translation>불투명도:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1001"/>
        <source>Move Vector</source>
        <translation>벡터 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1018"/>
        <source>Normal</source>
        <translation>보통</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1006"/>
        <source>Horizontal Gradient</source>
        <translation>수평 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1007"/>
        <source>Vertical Gradient</source>
        <translation>수직 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1008"/>
        <source>Diagonal Gradient</source>
        <translation>대각선 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1009"/>
        <source>Cross Diagonal Gradient</source>
        <translation>교차 대각선 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1010"/>
        <source>Radial Gradient</source>
        <translation>방사 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1011"/>
        <source>Free linear Gradient</source>
        <translation>자유 직선 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1012"/>
        <source>Free radial Gradient</source>
        <translation>자유 방사 그라디언트</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1036"/>
        <source>Edit Line Color Properties</source>
        <translation>선 색상 속성 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1037"/>
        <source>Edit Fill Color Properties</source>
        <translation>채움 색상 속성 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1038"/>
        <source>Saturation of color</source>
        <translation>색상 채도</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1039"/>
        <source>Normal or gradient fill method</source>
        <translation>보통 또는 그라디언트 채움 방법</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1040"/>
        <source>Set the transparency for the color selected</source>
        <translation>선택 색상의 투명도 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1041"/>
        <source>Move the start of the gradient vector with the left mouse button pressed and move the end of the gradient vector with the right mouse button pressed</source>
        <translation>왼쪽 마우스 버튼을 눌러 그라디언트 백터의 시작을 이동하고 오른쪽 마우스를 눌러 그라디언트 벡터의 끝으로 이동시킵니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1015"/>
        <source>Transparency Settings</source>
        <translation>투명도 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1016"/>
        <source>Blend Mode:</source>
        <translation>혼합 모드:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1019"/>
        <source>Darken</source>
        <translation>어둡게</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1020"/>
        <source>Lighten</source>
        <translation>밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1021"/>
        <source>Multiply</source>
        <translation>곱셈</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1022"/>
        <source>Screen</source>
        <translation>화면</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1023"/>
        <source>Overlay</source>
        <translation>중첩</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1024"/>
        <source>Hard Light</source>
        <translation>아주 밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1025"/>
        <source>Soft Light</source>
        <translation>중간 밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1026"/>
        <source>Difference</source>
        <translation>차이</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1028"/>
        <source>Color Dodge</source>
        <translation>피하기</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1029"/>
        <source>Color Burn</source>
        <translation>태우기</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1030"/>
        <source>Hue</source>
        <translation>색조</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1031"/>
        <source>Saturation</source>
        <translation>채도</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1032"/>
        <source>Color</source>
        <translation>색상</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1033"/>
        <source>Luminosity</source>
        <translation>광도</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="986"/>
        <source>Offsets</source>
        <translation>옵셋</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="987"/>
        <source>X:</source>
        <translation>X:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="989"/>
        <source>Y:</source>
        <translation>Y:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="991"/>
        <source>Scaling</source>
        <translation>비율</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="996"/>
        <source>Rotation</source>
        <translation>회전</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="997"/>
        <source>Angle</source>
        <translation>각도</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1013"/>
        <source>Pattern</source>
        <translation>패턴</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1027"/>
        <source>Exclusion</source>
        <translation>제외</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="992"/>
        <source>X-Scale:</source>
        <translation>X비율:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="994"/>
        <source>Y-Scale:</source>
        <translation>Y비율:</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1034"/>
        <source>Display only used Colors</source>
        <translation>사용된 색상만 표시</translation>
    </message>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="1042"/>
        <source>Display all colors from the document color list, or only the already used colors</source>
        <translation>문서 색상 몱록에서 모든 색상 또는 현재 사용되는 색깔만 나타내기</translation>
    </message>
</context>
<context>
    <name>CreateRange</name>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="13"/>
        <source>Create Range</source>
        <translation>범위 생성</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="54"/>
        <source>Number of Pages in Document:</source>
        <translation>문서 페이지 번호:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="64"/>
        <source>Doc Page Range</source>
        <translation>문서 페이지 범위</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="112"/>
        <source>Basic Range Selection</source>
        <translation>기본 범위 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="136"/>
        <source>Range of Pages</source>
        <translation>페이지 범위</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="160"/>
        <source>De&amp;lete</source>
        <translation>삭제(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="163"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="186"/>
        <source>Move &amp;Down</source>
        <translation>아래로 이동(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="189"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="196"/>
        <source>Move &amp;Up</source>
        <translation>위로 이동(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="199"/>
        <source>Alt+U</source>
        <translation>Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="218"/>
        <source>Add a Range of Pages</source>
        <translation>페이지 범위 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="242"/>
        <source>Consecutive Pages</source>
        <translation>연속 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="252"/>
        <source>Even Pages</source>
        <translation>짝수 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="259"/>
        <source>From:</source>
        <translation>부터:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="291"/>
        <source>To:</source>
        <translation>까지:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="334"/>
        <source>&amp;Add To Range</source>
        <translation>범위에 더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="337"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="362"/>
        <source>Odd Pages</source>
        <translation>홀수 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="372"/>
        <source>Comma Separated List</source>
        <translation>쉼표로 구분된 목록</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="383"/>
        <source>Advanced Reordering</source>
        <translation>자세한 정렬</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="439"/>
        <source>Page Order</source>
        <translation>페이지 순서</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="449"/>
        <source>Sample Page Order:</source>
        <translation>샘플 페이지 순서:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="478"/>
        <source>Page Group Size:</source>
        <translation>페이지 그룹 크기:</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="525"/>
        <source>&amp;OK</source>
        <translation>확인(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="528"/>
        <source>Alt+O</source>
        <translation>Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="535"/>
        <source>&amp;Cancel</source>
        <translation>취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/createrange.ui" line="538"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
</context>
<context>
    <name>CreateRangeBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Alt+U</source>
        <translation type="obsolete">Alt+U</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>De&amp;lete</source>
        <translation type="obsolete">삭제(&amp;L)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Advanced Reordering</source>
        <translation type="obsolete">부가 순서</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Page Group Size:</source>
        <translation type="obsolete">페이지그룹 크기:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Sample Page Order:</source>
        <translation type="obsolete">단순 페이지 순서:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Page Order</source>
        <translation type="obsolete">페이지 순서</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;OK</source>
        <translation type="obsolete">확인(&amp;O)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+O</source>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>CsvDialog</name>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="27"/>
        <source>CSV Importer Options</source>
        <translation>CSV 들여오기 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="37"/>
        <source>Field delimiter:</source>
        <translation>필드 구분자:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="89"/>
        <source>(TAB)</source>
        <translation>(탭)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="53"/>
        <source>Value delimiter:</source>
        <translation>값 구분자:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="68"/>
        <source>First row is a header</source>
        <translation>첫 번째 행이 헤더임</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="76"/>
        <source>OK</source>
        <translation>확인</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="79"/>
        <source>Cancel</source>
        <translation>취소</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/csvim/csvdia.cpp" line="59"/>
        <source>None</source>
        <comment>delimiter</comment>
        <translation>없음</translation>
    </message>
</context>
<context>
    <name>CupsOptions</name>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="52"/>
        <source>Printer Options</source>
        <translation>프린터 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="143"/>
        <source>Page Set</source>
        <translation>페이지 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="147"/>
        <source>All Pages</source>
        <translation>전체 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="141"/>
        <source>Even Pages only</source>
        <translation>짝수 페이지만</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="142"/>
        <source>Odd Pages only</source>
        <translation>홀수 페이지만</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="177"/>
        <source>Orientation</source>
        <translation>방향</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="181"/>
        <source>Portrait</source>
        <translation>세로방향</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="175"/>
        <source>Landscape</source>
        <translation>가로방향</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="197"/>
        <source>N-Up Printing</source>
        <translation>집약인쇄</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="201"/>
        <source>Page per Sheet</source>
        <translation>시트 당 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="196"/>
        <source>Pages per Sheet</source>
        <translation>시트 당 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="63"/>
        <source>Option</source>
        <translation>설정</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="64"/>
        <source>Value</source>
        <translation>값</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="224"/>
        <source>This panel displays various CUPS options when printing. The exact parameters available will depend on your printer driver. You can confirm CUPS support by selecting Help &gt; About. Look for the listings: C-C-T These equate to C=CUPS C=littlecms T=TIFF support. Missing library support is indicated by a *</source>
        <translation>이 패널에서 인쇄시 각종 CUPS 옵션을 표시합니다. 사용할 수 있는 정확한 매개 변수는 프린터 드라이버에 따라 다릅니다.  &quot;도움말 &gt; Scribus에 대하여&quot;를 선택하여 CUPS를 지원을 확인할 수 있습니다. 목록을 참조 : CCT는 C = CUPS C = littlecms T = TIFF 지원과 동일합니다. 지원 라이브러리가없는 경우는 *로 표시됩니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/cupsoptions.cpp" line="160"/>
        <source>Mirror</source>
        <translation>미러</translation>
    </message>
</context>
<context>
    <name>CurveWidget</name>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="414"/>
        <source>Open</source>
        <translation>열기</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="449"/>
        <source>Curve Files (*.scu);;All Files (*)</source>
        <translation>곡선 파일 (*.scu);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="449"/>
        <source>Save as</source>
        <translation>다른 이름으로 저장</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="483"/>
        <source>Cannot write the file: 
%1</source>
        <translation>파일을 쓸 수 없음: 
%1</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="509"/>
        <source>Inverts the curve</source>
        <translation>곡선을 반전</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="510"/>
        <source>Resets the curve</source>
        <translation>곡선을 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="511"/>
        <source>Switches between linear and cubic interpolation of the curve</source>
        <translation>곡선의 직선 및 3 차 보간 사이에서 전환</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="512"/>
        <source>Loads a curve</source>
        <translation>곡선 읽어오기</translation>
    </message>
    <message>
        <location filename="../../scribus/curvewidget.cpp" line="513"/>
        <source>Saves this curve</source>
        <translation>이 곡선을 저장</translation>
    </message>
</context>
<context>
    <name>CustomFDialog</name>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="327"/>
        <source>&amp;Compress File</source>
        <translation>파일 압축(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="306"/>
        <source>&amp;Include Fonts</source>
        <translation>글꼴 포함(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="355"/>
        <source>Encoding:</source>
        <translation>암호화:</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="274"/>
        <source>Show Preview</source>
        <translation>미리보기 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="308"/>
        <source>&amp;Include Color Profiles</source>
        <translation>색상 속성 포함(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="275"/>
        <source>Show a preview and information for the selected file</source>
        <translation>선택 파일의 미리보기 및 정보를 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="342"/>
        <source>Compress the Scribus document on save</source>
        <translation>저장시 Scribus 문서를 압축</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="344"/>
        <source>Include fonts when collecting files for the document. Be sure to know and understand licensing information for any fonts you collect and possibly redistribute.</source>
        <translation>문서의 파일을 수집 중 글꼴을 포함. 수집하고 재분배를 위한 임의 글꼴에 대한 라이센스 정보를 알아야 합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="346"/>
        <source>Include color profiles when collecting files for the document</source>
        <translation>문서의 파일을 줒집 중 색상 프로파일을 포함</translation>
    </message>
</context>
<context>
    <name>DashEditor</name>
    <message>
        <location filename="../../scribus/dasheditor.cpp" line="363"/>
        <source>Value:</source>
        <translation>값:</translation>
    </message>
    <message>
        <location filename="../../scribus/dasheditor.cpp" line="364"/>
        <source>Offset:</source>
        <translation>옵셋:</translation>
    </message>
</context>
<context>
    <name>DeferredTask</name>
    <message>
        <location filename="../../scribus/deferredtask.cpp" line="82"/>
        <source>Cancelled by user</source>
        <translation>사용자에 의한 취소</translation>
    </message>
</context>
<context>
    <name>DelColor</name>
    <message>
        <location filename="../../scribus/dcolor.cpp" line="28"/>
        <source>Delete Color</source>
        <translation>색상 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/dcolor.cpp" line="36"/>
        <source>Delete Color:</source>
        <translation>색상 삭제:</translation>
    </message>
    <message>
        <location filename="../../scribus/dcolor.cpp" line="45"/>
        <source>Replace With:</source>
        <translation>치환:</translation>
    </message>
</context>
<context>
    <name>DelPages</name>
    <message>
        <location filename="../../scribus/delpages.cpp" line="17"/>
        <source>Delete Pages</source>
        <translation>페이지 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/delpages.cpp" line="26"/>
        <source>Delete From:</source>
        <translation>삭제:</translation>
    </message>
    <message>
        <location filename="../../scribus/delpages.cpp" line="34"/>
        <source>to:</source>
        <translation>to:</translation>
    </message>
</context>
<context>
    <name>DelStyle</name>
    <message>
        <location filename="../editformats.cpp" line="36"/>
        <source>Delete Style</source>
        <translation type="obsolete">스타일 삭제</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="42"/>
        <source>Delete Style:</source>
        <translation type="obsolete">스타일 삭제:</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="46"/>
        <source>Replace With:</source>
        <translation type="obsolete">치환:</translation>
    </message>
    <message>
        <location filename="../editformats.cpp" line="49"/>
        <source>No Style</source>
        <translation type="obsolete">스타일 없음</translation>
    </message>
</context>
<context>
    <name>DocIm</name>
    <message>
        <location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="171"/>
        <source>Importing failed</source>
        <translation>들여오기 실패</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/docim/docim.cpp" line="172"/>
        <source>Importing Word document failed 
%1</source>
        <translation>Word 문서를 들여오는 데 실패
%1</translation>
    </message>
</context>
<context>
    <name>DocInfos</name>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="30"/>
        <source>Document Information</source>
        <translation>문서 정보</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="39"/>
        <source>&amp;Title:</source>
        <translation>제목(&amp;T):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="46"/>
        <source>&amp;Author:</source>
        <translation>저작자(&amp;A):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="53"/>
        <source>&amp;Keywords:</source>
        <translation>주제어(&amp;K):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="61"/>
        <source>Descri&amp;ption:</source>
        <translation>해설(&amp;P):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="74"/>
        <source>P&amp;ublisher:</source>
        <translation>게시자(&amp;U):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="81"/>
        <source>&amp;Contributors:</source>
        <translation>기여자(&amp;C):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="89"/>
        <source>Dat&amp;e:</source>
        <translation>날짜(&amp;E):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="96"/>
        <source>T&amp;ype:</source>
        <translation>형태(&amp;Y):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="103"/>
        <source>F&amp;ormat:</source>
        <translation>형식(&amp;O):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="110"/>
        <source>Identi&amp;fier:</source>
        <translation>식별자(&amp;F):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="117"/>
        <source>&amp;Source:</source>
        <translation>소스(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="124"/>
        <source>&amp;Language:</source>
        <translation>언어(&amp;L):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="131"/>
        <source>&amp;Relation:</source>
        <translation>관련(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="138"/>
        <source>Co&amp;verage:</source>
        <translation>범위(&amp;V):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="145"/>
        <source>Ri&amp;ghts:</source>
        <translation>권리(&amp;G):</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="152"/>
        <source>Documen&amp;t</source>
        <translation>문서(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="153"/>
        <source>Further &amp;Information</source>
        <translation>자세한 정보(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="159"/>
        <source>The person or organisation primarily responsible for making the content of the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>개인이나 조직이 첫째로 문서 제작 책임이 있음. 이 객체은 PDF 메타 자료 뿐만 아니라  참조를 위한 Scribus 문서에서 중복될 수 있음.</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="160"/>
        <source>A name given to the document. This field can be embedded in the Scribus document for reference, as well as in the metadata of a PDF</source>
        <translation>문서에 주어진 이름. 이 객체는 PDF 메타 자료 뿐만 아니라  참조를 위한 Scribus 문서에서 중복될 수 있음.</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="161"/>
        <source>An account of the content of the document. This field is for a brief description or abstract of the document. It is embedded in the PDF on export</source>
        <translation>문서 내용 설명. 이 객체는 간략한 설명 또는 문서의 요약. 출력시 PDF에서 중복될 수 있음</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="162"/>
        <source>The topic of the content of the document. This field is for document keywords you wish to embed in a PDF, to assist searches and indexing of PDF files</source>
        <translation>문서 내용의 주제. 이 객체는 문서에서 PDF에서 끼워넣는 핵심에서, 찾기와 PDF파일 인덱싱을 도와준다.</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="163"/>
        <source>A person or organisation responsible for making the document available</source>
        <translation>자료를 활용가능하도록 만들 책임이 있는 사람이나 조직체</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="164"/>
        <source>A person or organisation responsible for making contributions to the content of the document</source>
        <translation>문서 내용에 기여를 할 책임이 있는 사람이나 조직체</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="165"/>
        <source>A date associated with an event in the life cycle of the document, in YYYY-MM-DD format, as per ISO 8601</source>
        <translation>ISO 8601에 따라 YYYY-MM-DD 형식 내 문서의 사용 기간 중 이벤트와 연관된 날짜</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="166"/>
        <source>The nature or genre of the content of the document, eg. categories, functions, genres, etc</source>
        <translation>문서 내용의 요소 또는 장르, 즉 카테고리, 함수, 장르등</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="167"/>
        <source>The physical or digital manifestation of the document. Media type and dimensions would be worth noting. RFC2045,RFC2046 for MIME types are also useful here</source>
        <translation>문서의 물리적 또는 디지탈 명시. 미디어 형태 및 차원은 중요하지 않음. MIME 형태를 위한 RFC2045,RFC2046 는 여기에서 유용함.</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="168"/>
        <source>An unambiguous reference to the document within a given context such as ISBN or URI</source>
        <translation>ISBN 또는 URI와 같은 주어진 내용내의 문서에 대한 정확한 참고 자료</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="169"/>
        <source>A reference to a document from which the present document is derived, eg. ISBN or URI</source>
        <translation>ISBN 또는 URI와 같은 현재 문서가 파생된 참조자료</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="170"/>
        <source>The language in which the content of the document is written, usually a ISO-639 language code optionally suffixed with a hypen and an ISO-3166 country code, eg. en-GB, fr-CH</source>
        <translation>문서내용이 쓰여진 언어, 예를 들면  en-GB, fr-CH와 같이 하이픈과 ISO-3166 국가코드가 선택적으로 끝에 붙여지는 ISO-639 언어코드</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="171"/>
        <source>A reference to a related document, possibly using a formal identifier such as a ISBN or URI</source>
        <translation>관계 문서 참조, ISBN 또는 URI과 같이 형식적인 지시자를 사용하는 것이 가능함</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="172"/>
        <source>The extent or scope of the content of the document, possibly including location, time and jurisdiction ranges</source>
        <translation>문서 내용의 한계 또는 범위; 아마도 위치와 시간 그리고 영향 범위를 포함</translation>
    </message>
    <message>
        <location filename="../../scribus/docinfo.cpp" line="173"/>
        <source>Information about rights held in and over the document, eg. copyright, patent or trademark</source>
        <translation>문서 권리에 대한 정보, 예를 들어 저작권, 특허권, 상표권이 이에 해당</translation>
    </message>
</context>
<context>
    <name>DocSections</name>
    <message>
        <location filename="../../scribus/docsections.ui" line="13"/>
        <source>Document Sections</source>
        <translation>문서 섹션</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="83"/>
        <source>&amp;Add</source>
        <translation>더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="86"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="93"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="96"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="32"/>
        <source>Name</source>
        <translation>이름</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="37"/>
        <source>Shown</source>
        <translation>표시</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="42"/>
        <source>From</source>
        <translation>부터</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="47"/>
        <source>To</source>
        <translation>까지</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="52"/>
        <source>Style</source>
        <translation>스타일</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.ui" line="57"/>
        <source>Start</source>
        <translation>시작</translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="72"/>
        <source>Add a page numbering section to the document. The new section will be added after the currently selected section.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="73"/>
        <source>Delete the currently selected section.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="79"/>
        <source>&lt;b&gt;Name:&lt;/b&gt; Optional name for section eg. Index&lt;br/&gt;&lt;b&gt;Shown:&lt;/b&gt; Select to show the page numbers in this section if there is one or more text frames setup to do so.&lt;br/&gt;&lt;b&gt;From:&lt;/b&gt; The page index for this section to start at.&lt;br/&gt;&lt;b&gt;To:&lt;/b&gt; The page index for this section to stop at.&lt;br/&gt;&lt;b&gt;Style:&lt;/b&gt; Select the page number style to be used.&lt;br/&gt;&lt;b&gt;Start:&lt;/b&gt; The index within the Style&apos;s range to star at. Eg. If Start=2 and Style=a,b,c, ..., the numbers will begin at b. For the first section in the document this replaces the older First Page Number in the new file window.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>1, 2, 3, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>i, ii, iii, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>I, II, III, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>a, b, c, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="87"/>
        <source>A, B, C, ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="201"/>
        <source>Page Number Out Of Bounds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/docsections.cpp" line="201"/>
        <source>The value you have entered is outside the range of page numbers in the current document (%1-%2).</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DocSectionsBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Document Sections</source>
        <translation type="obsolete">문서 섹션</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Name</source>
        <translation type="obsolete">이름</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>From</source>
        <translation type="obsolete">에서</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>To</source>
        <translation type="obsolete">로</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Style</source>
        <translation type="obsolete">스타일</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Start</source>
        <translation type="obsolete">시작</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Add</source>
        <translation type="obsolete">더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Shown</source>
        <translation type="obsolete">보임</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributes</name>
    <message>
        <location filename="" line="0"/>
        <source>None</source>
        <translation type="obsolete">없음</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>Relates To</source>
        <translation>관계</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>Is Parent Of</source>
        <translation>부모</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>Is Child Of</source>
        <translation>자식</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
        <source>Text Frames</source>
        <translation>텍스트 프레임</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
        <source>Image Frames</source>
        <translation>이미지 프레임</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>Boolean</source>
        <translation>부울식</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>Integer</source>
        <translation>정수</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>String</source>
        <translation>문자열</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="13"/>
        <source>Document Item Attributes</source>
        <translation>문서 객체 속성</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="26"/>
        <source>Name</source>
        <translation>이름</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="31"/>
        <source>Type</source>
        <translation>형태</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="36"/>
        <source>Value</source>
        <translation>값</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="41"/>
        <source>Parameter</source>
        <translation>매개변수</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="46"/>
        <source>Relationship</source>
        <translation>관계</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="51"/>
        <source>Relationship To</source>
        <translation>관련처</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="56"/>
        <source>Auto Add To</source>
        <translation>자동 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="82"/>
        <source>&amp;Add</source>
        <translation>더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="85"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="92"/>
        <source>&amp;Copy</source>
        <translation>복사(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="95"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="102"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="105"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="112"/>
        <source>C&amp;lear</source>
        <translation>제거(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.ui" line="115"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="17"/>
        <source>None</source>
        <comment>relationship</comment>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="19"/>
        <source>None</source>
        <comment>auto add</comment>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>None</source>
        <comment>types</comment>
        <translation>없음</translation>
    </message>
    <message>
        <location filename="../../scribus/docitemattrprefs.cpp" line="21"/>
        <source>Real Number</source>
        <translation>실수</translation>
    </message>
</context>
<context>
    <name>DocumentItemAttributesBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Document Item Attributes</source>
        <translation type="obsolete">문서 객체 속성</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Name</source>
        <translation type="obsolete">이름</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Type</source>
        <translation type="obsolete">형태</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Value</source>
        <translation type="obsolete">값</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Parameter</source>
        <translation type="obsolete">매개변수</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Relationship</source>
        <translation type="obsolete">관계</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Relationship To</source>
        <translation type="obsolete">관련처</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Auto Add To</source>
        <translation type="obsolete">자동 더하기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Add</source>
        <translation type="obsolete">더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Copy</source>
        <translation type="obsolete">복사(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">섹제(&amp;D)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>C&amp;lear</source>
        <translation type="obsolete">삭제(&amp;L)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
</context>
<context>
    <name>EPSPlug</name>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="474"/>
        <source>Importing File:
%1
failed!</source>
        <translation>파일 들여오기:
%1
실패함!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="475"/>
        <source>Fatal Error</source>
        <translation>치명적 오류</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Converting Image:
%1
failed!</source>
        <translation type="obsolete">이미지 변환 중:
%1
실패!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="872"/>
        <source>Error</source>
        <translation>오류</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="78"/>
        <source>Analyzing PostScript:</source>
        <translation>포스트스크립트 분석:</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="480"/>
        <source>Generating Items</source>
        <translation>객체 생성</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="871"/>
        <source>Converting of %1 images failed!</source>
        <translation>%1 이미지 변환 실패!</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="738"/>
        <source>Group%1</source>
        <translation>그룹 %1</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importps.cpp" line="75"/>
        <source>Importing: %1</source>
        <translation>들여오기: %1</translation>
    </message>
</context>
<context>
    <name>EditStyle</name>
    <message>
        <location filename="../edit1format.cpp" line="47"/>
        <source>Edit Style</source>
        <translation type="obsolete">스타일 편집</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="67"/>
        <source>&amp;Name:</source>
        <translation type="obsolete">이름(&amp;N):</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="80"/>
        <source>Character</source>
        <translation type="obsolete">문자</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="272"/>
        <source> pt</source>
        <translation type="obsolete"> 포인트</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="239"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>None</source>
        <translation type="obsolete">없음</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="200"/>
        <source>Distances</source>
        <translation type="obsolete">거리</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="209"/>
        <source>Fixed Linespacing</source>
        <translation type="obsolete">고정 줄 간격</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="210"/>
        <source>Automatic Linespacing</source>
        <translation type="obsolete">자동 줄 간격</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="211"/>
        <source>Align to Baseline Grid</source>
        <translation type="obsolete">기준선 격자 정렬</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="268"/>
        <source>&amp;Lines:</source>
        <translation type="obsolete">선(&amp;L):</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="274"/>
        <source>Distance from Text:</source>
        <translation type="obsolete">텍스트로부터 거리:</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="300"/>
        <source>Tabulators and Indentation</source>
        <translation type="obsolete">탭키 설정 및 들여쓰기</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="324"/>
        <source>Preview of the Paragraph Style</source>
        <translation type="obsolete">문단 스타일 미리보기</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="360"/>
        <source>Name of your paragraph style</source>
        <translation type="obsolete">문단 스타일 이름</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="361"/>
        <source>Font of selected text or object</source>
        <translation type="obsolete">선택된 텍스트나 객체 글꼴</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="362"/>
        <source>Font Size</source>
        <translation type="obsolete">글꼴 크기</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="363"/>
        <source>Color of text fill</source>
        <translation type="obsolete">텍스트 채움 색상</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="364"/>
        <source>Color of text stroke</source>
        <translation type="obsolete">텍스트 외곽선 색상</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="369"/>
        <source>Spacing above the paragraph</source>
        <translation type="obsolete">문단 위 여백</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="373"/>
        <source>Line Spacing</source>
        <translation type="obsolete">줄 간격</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="375"/>
        <source>Toggles sample text of this paragraph style</source>
        <translation type="obsolete">이 문단 스타일의 예제 텍스트 토글</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Warning</source>
        <translation type="obsolete">경고</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Name of the Style is not unique</source>
        <translation type="obsolete">스타일 이름이 이미 있습니다</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="328"/>
        <source>Background</source>
        <translation type="obsolete">배경</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="371"/>
        <source>Manual Tracking</source>
        <translation type="obsolete">수동 탐색</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="372"/>
        <source>Offset to baseline of characters</source>
        <translation type="obsolete">문자 기준선까지 옵셋</translation>
    </message>
    <message>
        <location filename="../edit1format.cpp" line="448"/>
        <source>Auto</source>
        <translation type="obsolete">자동</translation>
    </message>
</context>
<context>
    <name>EditToolBar</name>
    <message>
        <location filename="../../scribus/ui/edittoolbar.cpp" line="29"/>
        <source>Edit</source>
        <translation>편집</translation>
    </message>
</context>
<context>
    <name>Editor</name>
    <message>
        <location filename="../../scribus/editor.cpp" line="30"/>
        <source>Editor</source>
        <translation>편집기</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="36"/>
        <source>&amp;New</source>
        <translation>새 파일(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="39"/>
        <source>&amp;Open...</source>
        <translation>열기(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="41"/>
        <source>Save &amp;As...</source>
        <translation>다음 이름으로 저장(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="43"/>
        <source>&amp;Save and Exit</source>
        <translation>저장 및 종료(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="45"/>
        <source>&amp;Exit without Saving</source>
        <translation>저장 없이 종료(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="47"/>
        <source>&amp;Undo</source>
        <translation>이전작업(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="50"/>
        <source>&amp;Redo</source>
        <translation>재실행(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="52"/>
        <source>Cu&amp;t</source>
        <translation>잘라내기(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="55"/>
        <source>&amp;Copy</source>
        <translation>복사(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="58"/>
        <source>&amp;Paste</source>
        <translation>붙여넣기(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="61"/>
        <source>C&amp;lear</source>
        <translation>제거(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="63"/>
        <source>&amp;Get Field Names</source>
        <translation>필드명 얻기(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="65"/>
        <source>&amp;File</source>
        <translation>파일(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="72"/>
        <source>&amp;Edit</source>
        <translation>편집(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="127"/>
        <source>JavaScripts (*.js);;All Files (*)</source>
        <translation>자바스크립트 (*.js);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="37"/>
        <source>Ctrl+N</source>
        <translation>Ctrl+N</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="48"/>
        <source>Ctrl+Z</source>
        <translation>Ctrl+Z</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="53"/>
        <source>Ctrl+X</source>
        <translation>Ctrl+X</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="56"/>
        <source>Ctrl+C</source>
        <translation>Ctrl+C</translation>
    </message>
    <message>
        <location filename="../../scribus/editor.cpp" line="59"/>
        <source>Ctrl-V</source>
        <translation>Ctrl-V</translation>
    </message>
</context>
<context>
    <name>EffectsDialog</name>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="44"/>
        <source>Image Effects</source>
        <translation>이미지 효과</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="81"/>
        <source>Options:</source>
        <translation>설정:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="98"/>
        <source>Color:</source>
        <translation>색상:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="109"/>
        <source>Shade:</source>
        <translation>음영:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="125"/>
        <source>Brightness:</source>
        <translation>밝기:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="147"/>
        <source>Contrast:</source>
        <translation>대비:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="198"/>
        <source>Radius:</source>
        <translation>반경:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="180"/>
        <source>Value:</source>
        <translation>명도:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="216"/>
        <source>Posterize:</source>
        <translation>포스터화:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="500"/>
        <source>Available Effects</source>
        <translation>이용가능한 효과</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1387"/>
        <source>Blur</source>
        <translation>흐림</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1365"/>
        <source>Brightness</source>
        <translation>밝기</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1356"/>
        <source>Colorize</source>
        <translation>색상화</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1371"/>
        <source>Contrast</source>
        <translation>대비</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="973"/>
        <source>Grayscale</source>
        <translation>회색톤</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="975"/>
        <source>Invert</source>
        <translation>반전</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1400"/>
        <source>Posterize</source>
        <translation>포스터화</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1377"/>
        <source>Sharpen</source>
        <translation>강조</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="482"/>
        <source>&gt;&gt;</source>
        <translation>&gt;&gt;</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="486"/>
        <source>&lt;&lt;</source>
        <translation>&lt;&lt;</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="497"/>
        <source>Effects in use</source>
        <translation>사용 중인 효과</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="611"/>
        <source>OK</source>
        <translation>확인</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="615"/>
        <source>Cancel</source>
        <translation>취소</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="351"/>
        <source>Color 1:</source>
        <translation>색상 1:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="371"/>
        <source>Color 2:</source>
        <translation>색상 2:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="391"/>
        <source>Color 3:</source>
        <translation>색상 3:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="411"/>
        <source>Color 4:</source>
        <translation>색상 4:</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1406"/>
        <source>Duotone</source>
        <translation>2색조</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1442"/>
        <source>Tritone</source>
        <translation>3색조</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1493"/>
        <source>Quadtone</source>
        <translation>4색조</translation>
    </message>
    <message>
        <location filename="../../scribus/effectsdialog.cpp" line="1559"/>
        <source>Curves</source>
        <translation>곡선</translation>
    </message>
</context>
<context>
    <name>ExportBitmap</name>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="189"/>
        <source>File exists. Overwrite?</source>
        <translation>파일이 있습니다. 겹쳐쓰겠습니까?</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="190"/>
        <source>exists already. Overwrite?</source>
        <translation>이미 있습니다. 겹쳐쓰겠습니까?</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="203"/>
        <source>Save as Image</source>
        <translation>이미지 저장</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="177"/>
        <source>Insufficient memory for this image size.</source>
        <translation>이 이미지 크기에 불충분한 메모리</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/export.cpp" line="204"/>
        <source>Error writing the output file(s).</source>
        <translation>출력파일 쓰기 오류.</translation>
    </message>
</context>
<context>
    <name>ExportForm</name>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="73"/>
        <source>Choose a Export Directory</source>
        <translation>내보낼 폴더 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="13"/>
        <source>Export as Image(s)</source>
        <translation>이미지로 내보내기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="153"/>
        <source>&amp;Export to Directory:</source>
        <translation>내보내기 폴더(&amp;E):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="166"/>
        <source>C&amp;hange...</source>
        <translation>바꾸기(&amp;H)...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="25"/>
        <source>Options</source>
        <translation>설정</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="54"/>
        <source>Image &amp;Type:</source>
        <translation>이미지 형태(&amp;T):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="64"/>
        <source>&amp;Quality:</source>
        <translation>품질(&amp;Q):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="74"/>
        <source>&amp;Resolution:</source>
        <translation>해상도(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="84"/>
        <source>&amp;Size:</source>
        <translation>크기(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="126"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="110"/>
        <source> dpi</source>
        <translation> dpi</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="175"/>
        <source>Range</source>
        <translation>범위</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="197"/>
        <source>&amp;Current page</source>
        <translation>현재 페이지(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="224"/>
        <source>&amp;All pages</source>
        <translation>전체 페이지(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="217"/>
        <source>&amp;Range</source>
        <translation>범위(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="110"/>
        <source>Export a range of pages</source>
        <translation>페이지 지정범위 내보내기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="111"/>
        <source>Insert a comma separated list of tokens where
a token can be * for all the pages, 1-5 for
a range of pages or a single page number.</source>
        <translation>콤마로 표시된 토큰 목록을 입력합니다. 
토큰에서 *은 모든 페이지를,일정범위를 나타날 때는 1-5과 같이, 
혹은 한 페이지 번호를 이용할 수 있습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="112"/>
        <source>Export all pages</source>
        <translation>전체 페이지 내보내기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="113"/>
        <source>Export only the current page</source>
        <translation>현재 페이지만 내보내기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="114"/>
        <source>Resolution of the Images
Use 72 dpi for Images intended for the Screen</source>
        <translation>이미지의 해상도 
화면상에는 72 dpi 이미지를 사용합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="115"/>
        <source>Size of the images. 100% for no changes, 200% for two times larger etc.</source>
        <translation>이미지의 크기. 100%에서는 변화없고,200%에서는 2배 커집니다。</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>The quality of your images - 100% is the best, 1% the lowest quality</source>
        <translation type="obsolete">이미지 품질 - 100%는 최고,1%는 최저의 품질입니다</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="118"/>
        <source>Available export formats</source>
        <translation>사용가능한 내보내기 형식</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="119"/>
        <source>The output directory - the place to store your images.
Name of the export file will be &apos;documentname-pagenumber.filetype&apos;</source>
        <translation>출력 폴더 -이미지를 저장하는 장소. 
출력 파일명은&apos;문서명-페이지 번호.확장자&apos;가 됩니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="120"/>
        <source>Change the output directory</source>
        <translation>출력 폴더 바꾸기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="44"/>
        <source>Image size in Pixels</source>
        <translation>화소단위 이미지 크기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/exportform.ui" line="37"/>
        <source>TextLabel</source>
        <translation>텍스트 라벨</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="116"/>
        <source>The compression ratio of your images - 100% is no compression, 0% highest compression. If in doubt, use &apos;Automatic&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/pixmapexport/dialog.cpp" line="117"/>
        <source>Automatic</source>
        <translation type="unfinished">자동</translation>
    </message>
</context>
<context>
    <name>ExtImageProps</name>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="39"/>
        <source>Extended Image Properties</source>
        <translation>확장 이미지 속성</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="102"/>
        <source>Normal</source>
        <translation>보통</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="103"/>
        <source>Darken</source>
        <translation>어둡게</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="104"/>
        <source>Lighten</source>
        <translation>밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="105"/>
        <source>Hue</source>
        <translation>색조</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="106"/>
        <source>Saturation</source>
        <translation>채도</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="107"/>
        <source>Color</source>
        <translation>색상</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="108"/>
        <source>Luminosity</source>
        <translation>광도</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="109"/>
        <source>Multiply</source>
        <translation>곱하기</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="110"/>
        <source>Screen</source>
        <translation>화면</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="111"/>
        <source>Dissolve</source>
        <translation>디졸브</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="112"/>
        <source>Overlay</source>
        <translation>중첩</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="113"/>
        <source>Hard Light</source>
        <translation>아주 밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="114"/>
        <source>Soft Light</source>
        <translation>중간 밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="115"/>
        <source>Difference</source>
        <translation>차이</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="116"/>
        <source>Exclusion</source>
        <translation>제외</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="117"/>
        <source>Color Dodge</source>
        <translation>피하기</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="118"/>
        <source>Color Burn</source>
        <translation>태우기</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="98"/>
        <source>Blend Mode:</source>
        <translation>혼합 모드:</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="121"/>
        <source>Opacity:</source>
        <translation>불투명도:</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="127"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="133"/>
        <source>Name</source>
        <translation>이름</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="214"/>
        <source>Layers</source>
        <translation>레이어</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="267"/>
        <source>Don&apos;t use any Path</source>
        <translation>임의 경로를 사용하지 마시오</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="269"/>
        <source>Paths</source>
        <translation>경로</translation>
    </message>
    <message>
        <location filename="../../scribus/extimageprops.cpp" line="276"/>
        <source>Live Preview</source>
        <translation>라이브 미리보기</translation>
    </message>
</context>
<context>
    <name>FDialogPreview</name>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="198"/>
        <source>Size:</source>
        <translation>크기:</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="199"/>
        <source>Resolution:</source>
        <translation>해상도:</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="199"/>
        <source>DPI</source>
        <translation>DPI</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="229"/>
        <source>Unknown</source>
        <translation>미정</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="205"/>
        <source>Colorspace:</source>
        <translation>색상공간:</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="216"/>
        <source>Title:</source>
        <translation>제목:</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="219"/>
        <source>No Title</source>
        <translation>제목 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="221"/>
        <source>Author:</source>
        <translation>저작자:</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="231"/>
        <source>Scribus Document</source>
        <translation>Scribus 문서</translation>
    </message>
    <message>
        <location filename="../../scribus/customfdialog.cpp" line="226"/>
        <source>File Format:</source>
        <translation>파일 형식:</translation>
    </message>
</context>
<context>
    <name>Farbmanager</name>
    <message>
        <location filename="" line="0"/>
        <source>Colors</source>
        <translation type="obsolete">색상</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Import</source>
        <translation type="obsolete">들여오기(&amp;I)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;New</source>
        <translation type="obsolete">새 파일(&amp;N)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Edit</source>
        <translation type="obsolete">편집(&amp;E)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>D&amp;uplicate</source>
        <translation type="obsolete">복제(&amp;U)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Remove Unused</source>
        <translation type="obsolete">미사용 제거(&amp;R)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Color Sets</source>
        <translation type="obsolete">색상 모음</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Current Color Set:</source>
        <translation type="obsolete">현재 색상 모음:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Save Color Set</source>
        <translation type="obsolete">색상 모음 저장(&amp;S)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Choose a color set to load</source>
        <translation type="obsolete">읽기위해 색상 모음 선택</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Save the current color set</source>
        <translation type="obsolete">현재 색상 모음 저장</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Remove unused colors from current document&apos;s color set</source>
        <translation type="obsolete">현재 문서에서 미사용 색상 제거</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Import colors to the current set from an existing document</source>
        <translation type="obsolete">기존 문서로부터색상을 현재 모음으로 들여오기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Create a new color within the current set</source>
        <translation type="obsolete">현재 모음내에서 새 색상 생성</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Edit the currently selected color</source>
        <translation type="obsolete">현재 선택 색상 편집</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Make a copy of the currently selected color</source>
        <translation type="obsolete">현재 선택 색상의 사본 생성</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Delete the currently selected color</source>
        <translation type="obsolete">현재 선택 색상을 삭제</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Make the current colorset the default color set</source>
        <translation type="obsolete">현재 색상 모음을 기본 색상모음으로 만듦</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Name:</source>
        <translation type="obsolete">이름(&amp;N):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Choose a Name</source>
        <translation type="obsolete">이름 선택</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Open</source>
        <translation type="obsolete">열기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation type="obsolete">문서 (*.sla *.sla.gz *.scd *.scd.gz);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">문서 (*.sla *.scd);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Copy of %1</source>
        <translation type="obsolete">%1 복사</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>New Color</source>
        <translation type="obsolete">새 색상</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>None</source>
        <translation type="obsolete">없음</translation>
    </message>
</context>
<context>
    <name>FileLoader</name>
    <message>
        <location filename="../../scribus/fileloader.cpp" line="591"/>
        <source>Some fonts used by this document have been substituted:</source>
        <translation>이 문서에서 사용되고 있는 몇개의 글꼴은 치환되었습니다:</translation>
    </message>
    <message>
        <location filename="../../scribus/fileloader.cpp" line="595"/>
        <source> was replaced by: </source>
        <translation>치환함: </translation>
    </message>
</context>
<context>
    <name>FileToolBar</name>
    <message>
        <location filename="../../scribus/ui/filetoolbar.cpp" line="31"/>
        <source>File</source>
        <translation>파일</translation>
    </message>
</context>
<context>
    <name>FontComboH</name>
    <message>
        <location filename="../../scribus/fontcombo.cpp" line="148"/>
        <source>Face:</source>
        <translation>인쇄면:</translation>
    </message>
    <message>
        <location filename="../../scribus/fontcombo.cpp" line="149"/>
        <source>Style:</source>
        <translation>스타일:</translation>
    </message>
</context>
<context>
    <name>FontListModel</name>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="63"/>
        <source>Font Name</source>
        <translation>글꼴명</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="65"/>
        <source>Use Font</source>
        <translation>글꼴 사용</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="67"/>
        <source>Family</source>
        <translation>패밀리</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="69"/>
        <source>Style</source>
        <translation>스타일</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="71"/>
        <source>Variant</source>
        <translation>변이</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="73"/>
        <source>Type</source>
        <translation>형태</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="75"/>
        <source>Format</source>
        <translation>형식</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="77"/>
        <source>Embed in PostScript</source>
        <translation>포스트스크립트에 내장</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="79"/>
        <source>Subset</source>
        <translation>부분집합</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="81"/>
        <source>Access</source>
        <translation>접근</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="83"/>
        <source>Used in Doc</source>
        <translation>문서에서 사용 중</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="85"/>
        <source>Path to Font File</source>
        <translation>글꼴 파일 경로</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="144"/>
        <source>Unknown</source>
        <comment>font type</comment>
        <translation>미정</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="157"/>
        <source>Unknown</source>
        <comment>font format</comment>
        <translation>미정</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="164"/>
        <source>User</source>
        <comment>font preview</comment>
        <translation>사용자</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="165"/>
        <source>System</source>
        <comment>font preview</comment>
        <translation>시스템</translation>
    </message>
    <message>
        <location filename="../../scribus/fontlistmodel.cpp" line="190"/>
        <source>Click to change the value</source>
        <translation>값을 변경하기 위하여 클릭</translation>
    </message>
</context>
<context>
    <name>FontPrefs</name>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="48"/>
        <source>Available Fonts</source>
        <translation>이용 가능한 글꼴</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="48"/>
        <source>Font Substitutions</source>
        <translation>글꼴 치환</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="48"/>
        <source>Additional Paths</source>
        <translation>부가 경로</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="58"/>
        <source>&amp;Available Fonts</source>
        <translation>이용 가능한 글꼴(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="66"/>
        <source>Font Name</source>
        <translation>글꼴 이름</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="67"/>
        <source>Replacement</source>
        <translation>치환</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="82"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="88"/>
        <source>Font &amp;Substitutions</source>
        <translation>글꼴 치환(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="107"/>
        <source>C&amp;hange...</source>
        <translation>바꾸기(&amp;H)...</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="109"/>
        <source>A&amp;dd...</source>
        <translation>더하기(&amp;D)...</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="111"/>
        <source>&amp;Remove</source>
        <translation>제거(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="135"/>
        <source>Additional &amp;Paths</source>
        <translation>부가 경로(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="247"/>
        <source>Choose a Directory</source>
        <translation>폴더 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/fontprefs.cpp" line="130"/>
        <source>Font search paths can only be set in File &gt; Preferences, and only when there is no document currently open. Close any open documents, then use File &gt; Preferences &gt; Fonts to change the font search path.</source>
        <translation>글꼴 찾기 경로는 파일 &gt; 기본설정에서 설정할 수 있습니다. 그리고 열린 문서가 현재 없을 때만 할 수 있습니다.  어떤 열린 문서를 닫고,  글꼴 찾기 경로를 변경하기 위하여 파일 &gt; 기본설정 &gt; 글꼴을 사용합니다.</translation>
    </message>
</context>
<context>
    <name>FontPreview</name>
    <message>
        <location filename="" line="0"/>
        <source>Font Name</source>
        <comment>font preview</comment>
        <translation type="obsolete">글꼴 이름</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Type</source>
        <comment>font preview</comment>
        <translation type="obsolete">형태</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Subset</source>
        <comment>font preview</comment>
        <translation type="obsolete">부분집합</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Access</source>
        <comment>font preview</comment>
        <translation type="obsolete">접근</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Font Size:</source>
        <translation type="obsolete">글꼴 크기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Fonts Preview</source>
        <comment>font preview</comment>
        <translation type="obsolete">글꼴 미리보기</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.ui" line="209"/>
        <source>&amp;Append</source>
        <translation type="obsolete">첨가하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+O</source>
        <comment>font preview</comment>
        <translation type="obsolete">Alt+O</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Quick Search: </source>
        <translation type="obsolete">빠른 찾기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
        <source>&amp;Search</source>
        <translation type="obsolete">찾기(&amp;S)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Close</source>
        <comment>font preview</comment>
        <translation type="obsolete">닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+C</source>
        <comment>font preview</comment>
        <translation type="obsolete">Alt+C</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="164"/>
        <source>Append selected font into Style, Font menu</source>
        <comment>font preview</comment>
        <translation type="obsolete">선택된 글꼴을 스타일, 글꼴 메뉴로 첨가하기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="111"/>
        <source>Leave preview</source>
        <comment>font preview</comment>
        <translation>미리보기 종료</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Typing the text here provides quick searching in the font names. E.g. &apos;bold&apos; shows all fonts with Bold in name. Searching is case insensitive.</source>
        <translation type="obsolete">텍스트 입력은 글꼴 이름을 빠른 찾기를 제공함. 즉  &apos;bold&apos; 입력은 bold이름을 가진 모든 글꼴을 보여준다. 찾기는 대소문자 무시된다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="114"/>
        <source>Start searching</source>
        <translation type="obsolete">찾기 시작</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="113"/>
        <source>Size of the selected font</source>
        <translation>선택 글꼴 크기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="44"/>
        <source>Woven silk pyjamas exchanged for blue quartz</source>
        <comment>font preview</comment>
        <translation>단지, 살아있음에 감사하며 행복을 느낍니다...</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="97"/>
        <source>User</source>
        <comment>font preview</comment>
        <translation type="obsolete">사용자</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="98"/>
        <source>System</source>
        <comment>font preview</comment>
        <translation type="obsolete">시스템</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="42"/>
        <source>Font Name</source>
        <translation type="obsolete">글꼴이름</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="44"/>
        <source>Type</source>
        <translation type="obsolete">형태</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="45"/>
        <source>Subset</source>
        <translation type="obsolete">부분집합</translation>
    </message>
    <message>
        <location filename="../plugins/fontpreview/fontpreview.cpp" line="46"/>
        <source>Access</source>
        <translation type="obsolete">접근</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="13"/>
        <source>Fonts Preview</source>
        <translation>글꼴 미리보기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="19"/>
        <source>&amp;Quick Search:</source>
        <translation>빠른 찾기(&amp;Q):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="38"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="80"/>
        <source>&amp;Font Size:</source>
        <translation>글꼴 크기(&amp;F):</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="103"/>
        <source>Text</source>
        <translation>텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="113"/>
        <source>Sample text to display</source>
        <translation>보여질 예제 텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="123"/>
        <source>Se&amp;t</source>
        <translation>설정(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="126"/>
        <source>Alt+T</source>
        <translation>Alt+T</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="133"/>
        <source>Reset the text</source>
        <translation>텍스트 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="167"/>
        <source>&amp;Close</source>
        <translation>닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="170"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.cpp" line="112"/>
        <source>Typing the text here provides quick searching in the font names. Searching is case insensitive. The given text is taken as substring.</source>
        <translation>텍스트 입력은 글꼴 이름을 빠른 찾기를 제공함. 찾기는 대소문자 무시된다. 주어진 텍스트는 부분 문자열로 취급됨</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="45"/>
        <source>Show Extended Font Informations</source>
        <translation type="obsolete">확장 글꼴 정보 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="136"/>
        <source>&amp;Default</source>
        <translation>기본값(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="35"/>
        <source>Show Extended Font Information</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreview.ui" line="120"/>
        <source>Set the preview text</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FontPreviewBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Fonts Preview</source>
        <translation type="obsolete">글꼴 미리보기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Search</source>
        <translation type="obsolete">찾기(&amp;S)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Font Name</source>
        <translation type="obsolete">글꼴 이름</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Type</source>
        <translation type="obsolete">형태</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Subset</source>
        <translation type="obsolete">부분집합</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Access</source>
        <translation type="obsolete">접근</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Font Size:</source>
        <translation type="obsolete">글꼴 크기(&amp;F):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Text</source>
        <translation type="obsolete">텍스트</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Sample text to display</source>
        <translation type="obsolete">보여질 예제 텍스트</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Append</source>
        <translation type="obsolete">추가하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Close</source>
        <translation type="obsolete">닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+C</source>
        <translation type="obsolete">Alt+C</translation>
    </message>
</context>
<context>
    <name>FontPreviewPlugin</name>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="49"/>
        <source>&amp;Font Preview...</source>
        <translation>글꼴 미리보기(&amp;F)...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="66"/>
        <source>Font Preview dialog</source>
        <translation>글꼴 미리보기 대화창</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fontpreview/fontpreviewplugin.cpp" line="67"/>
        <source>Sorting, searching and browsing available fonts.</source>
        <translation>이용 가능한 글꼴의 정렬, 찾기</translation>
    </message>
</context>
<context>
    <name>FontReplaceDialog</name>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="30"/>
        <source>Font Substitution</source>
        <translation>글꼴 치환</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="40"/>
        <source>This document contains some fonts that are not installed on your system, please choose a suitable replacement for them. Cancel will stop the document from loading.</source>
        <translation>이 문서는 시스템에 사용되지 않는 글꼴을 기지고 있으므로, 적절한 대체 글꼴을 선택하시오. 취소하면, 문서 읽기를 중지합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="45"/>
        <source>Original Font</source>
        <translation>초기 글꼴</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="46"/>
        <source>Substitution Font</source>
        <translation>글꼴 치환</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="72"/>
        <source>Make these substitutions permanent</source>
        <translation>계속 치환</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="83"/>
        <source>Cancels these font substitutions and stops loading the document.</source>
        <translation>글꼴 치환을 취소시키고, 문서 읽기를 그만 둠.</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="84"/>
        <source>Enabling this tells Scribus to use these replacements for missing fonts permanently in all future layouts. This can be reverted or changed in Edit &gt; Preferences &gt; Fonts.</source>
        <translation>이것의 사용은  Scribus가 계속 앞으로의 작업에서 없는 글꼴에 대한 대체물로 이용할 수 있습니다. 이것은 파일 - 기본 설정 - 글꼴에서 되돌리거나 변경할 수 있습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/fontreplacedialog.cpp" line="85"/>
        <source>If you select OK, then save, these substitutions are made permanent in the document.</source>
        <translation>확인를 눌러 저장하면, 그 변환은 영구적으로 저장됩니다.</translation>
    </message>
</context>
<context>
    <name>GradientEditor</name>
    <message>
        <location filename="../../scribus/gradienteditor.cpp" line="324"/>
        <source>Position:</source>
        <translation>위치:</translation>
    </message>
    <message>
        <location filename="../../scribus/gradienteditor.cpp" line="325"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/gradienteditor.cpp" line="333"/>
        <source>Add, change or remove color stops here</source>
        <translation>색상 눈금을 더하기, 변경하기 또는 제거하기</translation>
    </message>
</context>
<context>
    <name>GradientVectorDialog</name>
    <message>
        <location filename="../../scribus/cpalette.cpp" line="100"/>
        <source>Gradient Vector</source>
        <translation>그라디언트 벡터</translation>
    </message>
</context>
<context>
    <name>GuideManager</name>
    <message>
        <location filename="" line="0"/>
        <source>Manage Guides</source>
        <translation type="obsolete">안내선 관리</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Horizontal Guides</source>
        <translation type="obsolete">수평 안내선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Y-Pos:</source>
        <translation type="obsolete">Y 위치(&amp;Y):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="64"/>
        <source>&amp;Add</source>
        <translation>더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="74"/>
        <source>D&amp;elete</source>
        <translation>삭제(&amp;E)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Vertical Guides</source>
        <translation type="obsolete">수직 안내선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;X-Pos:</source>
        <translation type="obsolete">X 위치(&amp;X):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="100"/>
        <source>A&amp;dd</source>
        <translation>더하기(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="110"/>
        <source>De&amp;lete</source>
        <translation>삭제(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="287"/>
        <source>&amp;Page</source>
        <translation>페이지(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="125"/>
        <source>&amp;Lock Guides</source>
        <translation>안내선 잠금(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="43"/>
        <source>&amp;Single</source>
        <translation>개별 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="152"/>
        <source>Horizontals</source>
        <translation>수평선</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="362"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="313"/>
        <source>Alt+E</source>
        <translation>Alt+E</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="239"/>
        <source>Verticals</source>
        <translation>수직선</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="103"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="128"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="326"/>
        <source>Appl&amp;y to All Pages</source>
        <translation>전체 페이지 적용(&amp;Y)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="329"/>
        <source>Alt+Y</source>
        <translation>Alt+Y</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="146"/>
        <source>&amp;Column/Row</source>
        <translation>행/열(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="158"/>
        <source>&amp;Number:</source>
        <translation>숫자(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="181"/>
        <source>U&amp;se Gap:</source>
        <translation>간격 사용(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="184"/>
        <source>Alt+S</source>
        <translation>Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="281"/>
        <source>Refer To</source>
        <translation>기준</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="349"/>
        <source>Alt+P</source>
        <translation>Alt+P</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="300"/>
        <source>M&amp;argins</source>
        <translation>여백(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="310"/>
        <source>S&amp;election</source>
        <translation>선택(&amp;E):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="245"/>
        <source>Nu&amp;mber:</source>
        <translation>숫자(&amp;M):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="268"/>
        <source>Use &amp;Gap:</source>
        <translation>간격 사용(&amp;G):</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="271"/>
        <source>Alt+G</source>
        <translation>Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="337"/>
        <source>&amp;Misc</source>
        <translation>안내선 삭제(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="343"/>
        <source>Delete all guides from the current page</source>
        <translation>현재 페이지에서 전체 안내선 제거</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="346"/>
        <source>Delete Guides from Current &amp;Page</source>
        <translation>현재 페이지에서 안내선 제거(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="356"/>
        <source>Delete all guides from the current document</source>
        <translation>현재 문서에서 전체 안내선 제거</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="359"/>
        <source>Delete Guides from &amp;All Pages</source>
        <translation>전체 문서에서 안내선 제거(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.ui" line="15"/>
        <source>Guide Manager</source>
        <translation>안내선 관리자</translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="246"/>
        <source>Add a new horizontal guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="247"/>
        <source>Delete the selected horizontal guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="248"/>
        <source>Add a new vertical guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="249"/>
        <source>Delete the selected vertical guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="250"/>
        <source>Lock the guides</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="251"/>
        <source>Apply to all pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="252"/>
        <source>Number of horizontal guides to create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="253"/>
        <source>Number of vertical guides to create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="254"/>
        <source>Create rows with guides, with an additional gap between the rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="255"/>
        <source>Create columns with guides, with an additional gap between the columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="256"/>
        <source>Create the selected number of horizontal guides relative to the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="257"/>
        <source>Create the selected number of horizontal guides relative to the current page&apos;s margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="258"/>
        <source>Create the selected number of horizontal guides relative to the current selection of items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="259"/>
        <source>Create the selected number of vertical guides relative to the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="260"/>
        <source>Create the selected number of vertical guides relative to the current page&apos;s margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="261"/>
        <source>Create the selected number of vertical guides relative to the current selection of items</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="262"/>
        <source>Apply the shown guides to all pages in the document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="263"/>
        <source>Delete all guides shown on the current page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/guidemanager.cpp" line="264"/>
        <source>Delete all guides from all pages</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GuideManagerBase</name>
    <message>
        <location filename="" line="0"/>
        <source>Manage Guides</source>
        <translation type="obsolete">안내선 관리</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Guide</source>
        <translation type="obsolete">안내선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Add</source>
        <translation type="obsolete">더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>D&amp;elete</source>
        <translation type="obsolete">삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+E</source>
        <translation type="obsolete">Alt+E</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>A&amp;dd</source>
        <translation type="obsolete">더하기(&amp;D)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+D</source>
        <translation type="obsolete">Alt+D</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>De&amp;lete</source>
        <translation type="obsolete">삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Lock Guides</source>
        <translation type="obsolete">안내선 잠금(&amp;L)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Appl&amp;y to All Pages</source>
        <translation type="obsolete">전체 페이지에 적용(&amp;Y)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+Y</source>
        <translation type="obsolete">Alt+Y</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Number:</source>
        <translation type="obsolete">번호(&amp;N):</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Page</source>
        <translation type="obsolete">페이지(&amp;P)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+P</source>
        <translation type="obsolete">Alt+P</translation>
    </message>
</context>
<context>
    <name>HelpBrowser</name>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="31"/>
        <source>&amp;Contents</source>
        <translation>내용(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="60"/>
        <source>&amp;Search</source>
        <translation>찾기(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="45"/>
        <source>Se&amp;arch</source>
        <translation>찾기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="96"/>
        <source>&amp;New</source>
        <translation>새 파일(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="178"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="79"/>
        <source>Book&amp;marks</source>
        <translation>북마크(&amp;M)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="148"/>
        <source>&amp;Print...</source>
        <translation>인쇄(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="158"/>
        <source>&amp;Find...</source>
        <translation>찾기(&amp;F)...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="183"/>
        <source>D&amp;elete All</source>
        <translation>전체 삭제(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="137"/>
        <source>Scribus Help</source>
        <translation>Scribus 도움말</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="53"/>
        <source>Searching is case insensitive</source>
        <translation>찾기는 대소문자를 무시</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="86"/>
        <source>1</source>
        <translation>1</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="153"/>
        <source>&amp;Exit</source>
        <translation>종료(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="163"/>
        <source>Find &amp;Next...</source>
        <translation>다음 찾기(&amp;N)...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="168"/>
        <source>Find &amp;Previous...</source>
        <translation>이전 찾기(&amp;P)...</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/helpbrowser.ui" line="173"/>
        <source>&amp;Add</source>
        <translation>더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="287"/>
        <source>Scribus Online Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="289"/>
        <source>&amp;File</source>
        <translation type="unfinished">파일(&amp;F)</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="290"/>
        <source>&amp;Edit</source>
        <translation type="unfinished">편집(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="291"/>
        <source>&amp;Bookmarks</source>
        <translation type="unfinished">북마크(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="294"/>
        <source>&amp;Quit</source>
        <translation type="unfinished">종료(&amp;Q)</translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="296"/>
        <source>Find &amp;Next</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="297"/>
        <source>Find &amp;Previous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="298"/>
        <source>&amp;Add Bookmark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="377"/>
        <source>Find</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="377"/>
        <source>Search Term:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="409"/>
        <source>New Bookmark</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="409"/>
        <source>New Bookmark&apos;s Title:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/helpbrowser.cpp" line="715"/>
        <source>&lt;h2&gt;&lt;p&gt;Sorry, no manual is installed!&lt;/p&gt;&lt;p&gt;Please see:&lt;/p&gt;&lt;ul&gt;&lt;li&gt;http://docs.scribus.net for updated documentation&lt;/li&gt;&lt;li&gt;http://www.scribus.net for downloads&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;</source>
        <comment>HTML message for no documentation available to show</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HelpBrowser2</name>
    <message>
        <location filename="../ui/hb2.ui" line="30"/>
        <source>&amp;Contents</source>
        <translation type="obsolete">내용(&amp;C)</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="49"/>
        <source>Se&amp;arch</source>
        <translation type="obsolete">찾기(&amp;S)</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="64"/>
        <source>&amp;Search</source>
        <translation type="obsolete">찾기(&amp;S)</translation>
    </message>
    <message>
        <location filename="../ui/hb2.ui" line="77"/>
        <source>Book&amp;marks</source>
        <translation type="obsolete">북마크(&amp;M)</translation>
    </message>
</context>
<context>
    <name>HyAsk</name>
    <message>
        <location filename="../../scribus/hyask.cpp" line="48"/>
        <source>Possible Hyphenation</source>
        <translation>이용가능한 하이픈</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="68"/>
        <source>Accept</source>
        <translation>허용</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="89"/>
        <source>Skip</source>
        <translation>건너뛰기</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="107"/>
        <source>Cancel</source>
        <translation>취소</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="77"/>
        <source>Add to the
Exception List</source>
        <translation>예외 목록에 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/hyask.cpp" line="97"/>
        <source>Add to the
Ignore List</source>
        <translation>무시 목록에 더하기</translation>
    </message>
</context>
<context>
    <name>HySettings</name>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="84"/>
        <source>Ignore List</source>
        <translation>무시 목록</translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="113"/>
        <source>Add a new Entry</source>
        <translation>새 객체 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="125"/>
        <source>Edit Entry</source>
        <translation>객체 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/hysettings.cpp" line="125"/>
        <source>Exception List</source>
        <translation>예외 목록</translation>
    </message>
</context>
<context>
    <name>ImageInfoDialog</name>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="23"/>
        <source>Image Info</source>
        <translation>이미지 정보</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="30"/>
        <source>General Info</source>
        <translation>일반 정보</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="34"/>
        <source>Date / Time:</source>
        <translation>날짜 / 시간:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="38"/>
        <source>Has Embedded Profile:</source>
        <translation>내장 프로파일 있음:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="46"/>
        <source>Profile Name:</source>
        <translation>프로파일 이름:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="50"/>
        <source>Has Embedded Paths:</source>
        <translation>내장 경로 있음:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="58"/>
        <source>Has Layers:</source>
        <translation>레이어 있음:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="69"/>
        <source>EXIF Info</source>
        <translation>EXIF 정보</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="84"/>
        <source>Artist:</source>
        <translation>아티스트:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="126"/>
        <source>Comment:</source>
        <translation>설명:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="127"/>
        <source>User Comment:</source>
        <translation>사용자 설명:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="128"/>
        <source>Camera Model:</source>
        <translation>카메라 모델:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="129"/>
        <source>Camera Manufacturer:</source>
        <translation>카메라 제조사:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="135"/>
        <source>Description:</source>
        <translation>설명:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="136"/>
        <source>Copyright:</source>
        <translation>저작권:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="137"/>
        <source>Scanner Model:</source>
        <translation>스캐너 모델:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="138"/>
        <source>Scanner Manufacturer:</source>
        <translation>스캐너 제조사:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="130"/>
        <source>Exposure time</source>
        <translation>노출 시간</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="131"/>
        <source>Aperture:</source>
        <translation>鮮明に見える範囲:</translation>
    </message>
    <message>
        <location filename="../../scribus/imageinfodialog.cpp" line="132"/>
        <source>ISO equiv.:</source>
        <translation>ISO 감도:</translation>
    </message>
</context>
<context>
    <name>ImportAIPlugin</name>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="58"/>
        <source>Import AI...</source>
        <translation>AI 들여오기...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="79"/>
        <source>Imports Illustrator Files</source>
        <translation>일러스트레이트 파일 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="80"/>
        <source>Imports most Illustrator files into the current document,
converting their vector data into Scribus objects.</source>
        <translation>일러스트레이트 파일을 현재 문서로 읽어오기,
벡터 자료를 Scribus 객체로 변환시킴.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/aiimplugin/importaiplugin.cpp" line="162"/>
        <source>The file could not be imported</source>
        <translation>파일을 들여올 수 없습니다</translation>
    </message>
</context>
<context>
    <name>ImportDialog</name>
    <message>
        <location filename="../smstyleimport.cpp" line="30"/>
        <source>Choose Styles</source>
        <translation type="obsolete">스타일 선택</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="35"/>
        <source>Available Styles</source>
        <translation type="obsolete">이용 가능한 스타일</translation>
    </message>
    <message>
        <location filename="../smstyleimport.cpp" line="49"/>
        <source>Paragraph Styles</source>
        <translation type="obsolete">문단 스타일</translation>
    </message>
</context>
<context>
    <name>ImportPSPlugin</name>
    <message>
        <location filename="../../scribus/plugins/psimport/importpsplugin.cpp" line="57"/>
        <source>Import PostScript...</source>
        <translation>포스트스크립트 들여오기...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importpsplugin.cpp" line="78"/>
        <source>Imports PostScript Files</source>
        <translation>포스트스크립트 파일 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/psimport/importpsplugin.cpp" line="79"/>
        <source>Imports most PostScript files into the current document,
converting their vector data into Scribus objects.</source>
        <translation>포스트스크립트 파일을 현재 문서로 들여오기,
벡터 자료를 Scribus 객체로 변환시킴.</translation>
    </message>
</context>
<context>
    <name>ImportXfigPlugin</name>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="58"/>
        <source>Import Xfig...</source>
        <translation>Xfig 들여오기...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="79"/>
        <source>Imports Xfig Files</source>
        <translation>Xfig 파일 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="80"/>
        <source>Imports most Xfig files into the current document,
converting their vector data into Scribus objects.</source>
        <translation>Xfig 파일을 현재 문서로 들여오기,
벡터 자료를 Scribus 객체로 변환시킴.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/xfigimplugin/importxfigplugin.cpp" line="128"/>
        <source>All Supported Formats</source>
        <translation>전체 지원 형식</translation>
    </message>
</context>
<context>
    <name>Imposition</name>
    <message>
        <location filename="../../scribus/plugins/imposition/imposition.cpp" line="72"/>
        <source>Portrait</source>
        <translation>세로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/imposition.cpp" line="73"/>
        <source>Landscape</source>
        <translation>가로 방향</translation>
    </message>
</context>
<context>
    <name>ImpositionBase</name>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="19"/>
        <source>Imposition</source>
        <translation>정판</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="44"/>
        <source>Gri&amp;d</source>
        <translation>격자(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="102"/>
        <source>Copies</source>
        <translation>부수</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="157"/>
        <source>Do&amp;uble sided</source>
        <translation>양면(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="160"/>
        <source>Alt+U</source>
        <translation>Alt+U</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="186"/>
        <source>Front side</source>
        <translation>정면</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="218"/>
        <source>Back side</source>
        <translation>뒷면</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="253"/>
        <source>&amp;Booklet</source>
        <translation>소책자(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="285"/>
        <source>Pages per sheet</source>
        <translation>시트당 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="296"/>
        <source>4</source>
        <translation>4</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="301"/>
        <source>8</source>
        <translation>8</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="306"/>
        <source>16</source>
        <translation>16</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="318"/>
        <source>Pages</source>
        <translation>페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="325"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Separate pages with a comma, ranges with a hyphen, e.g. 1,4,9-11 to get pages 1,4,9,10,11.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="339"/>
        <source>Fold</source>
        <translation>접힘</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="349"/>
        <source>Front page from</source>
        <translation>정면 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="376"/>
        <source>Double sided</source>
        <translation>양면</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="387"/>
        <source>Back page from</source>
        <translation>뒷면 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="415"/>
        <source>Destination page</source>
        <translation>목표 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="455"/>
        <source>Size</source>
        <translation>크기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="487"/>
        <source>Orientation</source>
        <translation>방향</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="519"/>
        <source>Width</source>
        <translation>너비</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="564"/>
        <source>Height</source>
        <translation>높이</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="620"/>
        <source>Preview</source>
        <translation>미리보기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="627"/>
        <source>Refresh preview</source>
        <translation>미리보기 업데이트</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="671"/>
        <source>&amp;OK</source>
        <translation>완료(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="674"/>
        <source>Alt+G</source>
        <translation>Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="681"/>
        <source>&amp;Cancel</source>
        <translation>취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionbase.ui" line="684"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
</context>
<context>
    <name>ImpositionPlugin</name>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionplugin.cpp" line="37"/>
        <source>&amp;Imposition...</source>
        <translation>정판...(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionplugin.cpp" line="69"/>
        <source>Imposition dialog</source>
        <translation>정판 대화창</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/imposition/impositionplugin.cpp" line="70"/>
        <source>Imposition on grids, booklets and folds</source>
        <translation>격자,소책자와 접힘 정판</translation>
    </message>
</context>
<context>
    <name>InsPage</name>
    <message>
        <location filename="../../scribus/inspage.cpp" line="30"/>
        <source>Insert Page</source>
        <translation>페이지 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="63"/>
        <source>&amp;Insert</source>
        <translation>삽입(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="46"/>
        <source>Page(s)</source>
        <translation>페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="50"/>
        <source>before Page</source>
        <translation>페이지 이전</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="51"/>
        <source>after Page</source>
        <translation>페이지 이후</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="52"/>
        <source>at End</source>
        <translation>마지막에</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="67"/>
        <source>Master Pages</source>
        <translation>마스터 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="77"/>
        <source>&amp;Master Page:</source>
        <translation>마스터 페이지(&amp;M):</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="205"/>
        <source>Page Size</source>
        <translation>페이지 크기</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="209"/>
        <source>&amp;Size:</source>
        <translation>크기(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="224"/>
        <source>Orie&amp;ntation:</source>
        <translation>방향(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="227"/>
        <source>Portrait</source>
        <translation>세로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="228"/>
        <source>Landscape</source>
        <translation>가로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="233"/>
        <source>&amp;Width:</source>
        <translation>너비(&amp;W):</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="240"/>
        <source>&amp;Height:</source>
        <translation>높이(&amp;H):</translation>
    </message>
    <message>
        <location filename="../../scribus/inspage.cpp" line="245"/>
        <source>Move Objects with their Page</source>
        <translation>페이지의 객체 이동</translation>
    </message>
</context>
<context>
    <name>InsertAFrame</name>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="13"/>
        <source>Insert A Frame</source>
        <translation>프레임 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="37"/>
        <source>T&amp;ype</source>
        <translation>형태(&amp;Y)</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="75"/>
        <source>&amp;Text Frame</source>
        <translation>텍스트 프레임(&amp;T)</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="85"/>
        <source>&amp;Image Frame</source>
        <translation>이미지 프레임(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="122"/>
        <source>&amp;Location</source>
        <translation>위치(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="137"/>
        <source>Page Placement</source>
        <translation>페이지 위치</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="152"/>
        <source>Current Page</source>
        <translation>현재 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="162"/>
        <source>All Pages</source>
        <translation>전체 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="773"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="225"/>
        <source>Position of Frame</source>
        <translation>프레임 위치</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="240"/>
        <source>Top Left of Margins</source>
        <translation>여백 왼쪽 위</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="250"/>
        <source>Top Left of Page</source>
        <translation>페이지 왼쪽 위</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="260"/>
        <source>Top Left of Bleed</source>
        <translation>물림재단 왼쪽 위</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="316"/>
        <source>X:</source>
        <translation>X:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="309"/>
        <source>Y:</source>
        <translation>Y:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="379"/>
        <source>&amp;Size</source>
        <translation>크기(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="409"/>
        <source>Same as the Page Margins</source>
        <translation>페이지 여백과 같음</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="419"/>
        <source>Same as the Page</source>
        <translation>페이지와 같음</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="429"/>
        <source>Same as the Bleed</source>
        <translation>물림재단과 같음</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="439"/>
        <source>Same as the Imported Image</source>
        <translation>들여온 이미지와 같음</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="488"/>
        <source>Height:</source>
        <translation>높이:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="495"/>
        <source>Width:</source>
        <translation>너비:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="558"/>
        <source>&amp;Options</source>
        <translation>설정(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="759"/>
        <source>Source Image:</source>
        <translation>소스 이미지:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="813"/>
        <source>There are no options for this type of frame</source>
        <translation>프레임 형식을 위한 설정이 없습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="625"/>
        <source>Columns:</source>
        <translation>열:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="611"/>
        <source>Gap:</source>
        <translation>단 간격:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Link Created Frames</source>
        <translation type="obsolete">생성된 프레임 링크</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="697"/>
        <source>Source Document:</source>
        <translation>소스 문서:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="172"/>
        <source>Range of Pages</source>
        <translation>페이지 범위</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="270"/>
        <source>Custom Position</source>
        <translation>사용자 위치</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="449"/>
        <source>Custom Size</source>
        <translation>사용자 크기</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="664"/>
        <source>Link to Existing Frame</source>
        <translation>기존 프레임 링크</translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="133"/>
        <source>&lt;b&gt;Insert a text frame&lt;/b&gt;&lt;br/&gt;A text frame allows you to enter any text in a defined position with the formatting you choose. You may select a text file on the Options tab if you want to immediately import a document into the frame. Scribus supports a wide variety of importable formats from plain text to OpenOffice.org.&lt;br/&gt;Your text may be edited and formatted on the page directly or in the Story Editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="137"/>
        <source>&lt;b&gt;Insert an image frame&lt;/b&gt;&lt;br/&gt;An image frame allows you to place an image onto your page. Various image effects may be applied or combined including transparencies, brightness, and posterisation that allow retouching or the creation of interesting visual results. Image scaling and shaping is performed with the Properties Palette.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.cpp" line="237"/>
        <source>Open</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="72"/>
        <source>Insert one or more text frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="82"/>
        <source>Insert one or more image frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="134"/>
        <source>Place the new frames on the current page, on all pages or on a selected range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="149"/>
        <source>Insert the frame on the current page only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="159"/>
        <source>Insert one frame for each existing page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="169"/>
        <source>Insert frames on a range of pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="187"/>
        <source>Range of pages to insert frames on</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="222"/>
        <source>Position the new frame in relation to the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="237"/>
        <source>Insert the frame at the top left of the page margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="247"/>
        <source>Insert the frame at the top left of the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="257"/>
        <source>Insert the frame at the top left of the page bleed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="267"/>
        <source>Insert the frame at a custom position on the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="323"/>
        <source>Top position of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="330"/>
        <source>Left position of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="406"/>
        <source>Insert the new frame with the same dimensions as the page margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="416"/>
        <source>Insert the new frame with the same dimensions as the page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="426"/>
        <source>Insert the new frame with the same dimensions as the bleed area outside the boundary of the page itself</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="436"/>
        <source>Insert the new frame with the same dimensions as the image that will be imported</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="446"/>
        <source>Insert the new frame with a custom size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="502"/>
        <source>Width of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="509"/>
        <source>Height of the inserted frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="601"/>
        <source>Number of columns for the inserted text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="618"/>
        <source>Distance between the columns in the text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="649"/>
        <source>Link the inserted text frames together to form a chain of frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="652"/>
        <source>Link Inserted Frames</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="661"/>
        <source>Link the first inserted frame to a preexisting text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="680"/>
        <source>Name of existing text frame to link to</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="704"/>
        <source>Source document to load into the text frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/insertaframe.ui" line="766"/>
        <source>Source image to load into the inserted image frame</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InsertAFrameBase</name>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Text Frame</source>
        <translation type="obsolete">텍스트 프레임(&amp;T)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+T</source>
        <translation type="obsolete">Alt+T</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Image Frame</source>
        <translation type="obsolete">이미지 프레임(&amp;I)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+I</source>
        <translation type="obsolete">Alt+I</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>T&amp;able</source>
        <translation type="obsolete">표(&amp;A)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Polygon</source>
        <translation type="obsolete">다각형</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>X:</source>
        <translation type="obsolete">X:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Y:</source>
        <translation type="obsolete">Y:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Size</source>
        <translation type="obsolete">크기(&amp;S)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Height:</source>
        <translation type="obsolete">높이:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Width:</source>
        <translation type="obsolete">너비:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Options</source>
        <translation type="obsolete">설정(&amp;O)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Source Image:</source>
        <translation type="obsolete">소스 이미지:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Select File...</source>
        <translation type="obsolete">파일 선택(&amp;S)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+S</source>
        <translation type="obsolete">Alt+S</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Columns:</source>
        <translation type="obsolete">행:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Gap:</source>
        <translation type="obsolete">간격:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;OK</source>
        <translation type="obsolete">확인(&amp;O)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Cancel</source>
        <translation type="obsolete">취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>All Pages</source>
        <translation type="obsolete">전체 페이지</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>...</source>
        <translation type="obsolete">...</translation>
    </message>
</context>
<context>
    <name>InsertTable</name>
    <message>
        <location filename="../../scribus/insertTable.cpp" line="15"/>
        <source>Insert Table</source>
        <translation>표 삽입</translation>
    </message>
    <message>
        <location filename="../../scribus/insertTable.cpp" line="28"/>
        <source>Number of rows:</source>
        <translation>삽입 행 수:</translation>
    </message>
    <message>
        <location filename="../../scribus/insertTable.cpp" line="29"/>
        <source>Number of columns:</source>
        <translation>삽입 열 수:</translation>
    </message>
</context>
<context>
    <name>JavaDocs</name>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="27"/>
        <source>Edit JavaScripts</source>
        <translation>자바스크립 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="46"/>
        <source>&amp;Edit...</source>
        <translation>편집(&amp;E)...</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="49"/>
        <source>&amp;Add...</source>
        <translation>더하기(&amp;A)...</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="52"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="57"/>
        <source>&amp;Close</source>
        <translation>닫기(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="71"/>
        <source>Adds a new Script, predefines a function with the same name. If you want to use this script as an &quot;Open Action&quot; script be sure not to change the name of the function.</source>
        <translation>같은 이름을 가진 새로운 스크립트, 이미 정의된 함수를 더합니다.  스크립트를 &quot;Open Action&quot; 스크립트로 사용하려면 함수 이름을 변경하지 않도록 하여야 합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="77"/>
        <source>&amp;New Script:</source>
        <translation>새 스크립트(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="78"/>
        <source>New Script</source>
        <translation>새 스크립트</translation>
    </message>
    <message>
        <location filename="../../scribus/javadocs.cpp" line="123"/>
        <source>Do you really want to delete this script?</source>
        <translation>이 스크립트를 정말로 삭제하시겠습니까?</translation>
    </message>
</context>
<context>
    <name>KeyManager</name>
    <message>
        <location filename="" line="0"/>
        <source>Action</source>
        <translation type="obsolete">실행</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Current Key</source>
        <translation type="obsolete">현재 키</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Select a Key for this Action</source>
        <translation type="obsolete">실행 위해 키 선택</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;No Key</source>
        <translation type="obsolete">키 없음(&amp;N)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;User Defined Key</source>
        <translation type="obsolete">사용자 정의 키(&amp;U)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>ALT+SHIFT+T</source>
        <translation type="obsolete">ALT+SHIFT+T</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Set &amp;Key</source>
        <translation type="obsolete">키 설정(&amp;K)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Loadable Shortcut Sets</source>
        <translation type="obsolete">읽을 수 있는 단축키 설정</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Load</source>
        <translation type="obsolete">읽어오기(&amp;L)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Import...</source>
        <translation type="obsolete">들여오기(&amp;I)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Export...</source>
        <translation type="obsolete">내보내기(&amp;E)...</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Reset</source>
        <translation type="obsolete">초기화(&amp;R)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Keyboard shortcut sets available to load</source>
        <translation type="obsolete">읽어오기 가능한 키보드 단축키 설정</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Load the selected shortcut set</source>
        <translation type="obsolete">선택한 단축키 설정 읽어오기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Import a shortcut set into the current configuration</source>
        <translation type="obsolete">단축키 설정을 현재 설정으로 들여오기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Export the current shortcuts into an importable file</source>
        <translation type="obsolete">현재 단축키를 파일로 내보내기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Reload the default Scribus shortcuts</source>
        <translation type="obsolete">기본 Scribus 단축키 다시 읽어오기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt</source>
        <translation type="obsolete">Alt</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Ctrl</source>
        <translation type="obsolete">Ctrl</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Shift</source>
        <translation type="obsolete">Shift</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Shift+</source>
        <translation type="obsolete">Shift+</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Alt+</source>
        <translation type="obsolete">Alt+</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Ctrl+</source>
        <translation type="obsolete">Ctrl+</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Warning</source>
        <translation type="obsolete">경고</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>This Key Sequence is already in use</source>
        <translation type="obsolete">이 키는 벌써 이용 중입니다</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Key Set XML Files (*.ksxml)</source>
        <translation type="obsolete">키 모음 XML 파일 (*.ksxml)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>This key sequence is already in use</source>
        <translation type="obsolete">이 키가 벌써 이용 중입니다</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Meta</source>
        <translation type="obsolete">메타</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Meta+</source>
        <translation type="obsolete">메타+</translation>
    </message>
</context>
<context>
    <name>LatexEditor</name>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="32"/>
        <source>Enter Code:</source>
        <translation>코드 입력:</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="44"/>
        <source>Update</source>
        <translation>업데이트</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="51"/>
        <source>Revert</source>
        <translation>거꾸로</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="130"/>
        <source>Program Messages:</source>
        <translation>프로그램 메세지:</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="181"/>
        <source>Status: Unknown</source>
        <translation>상태: 미정</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="165"/>
        <source>Kill Program</source>
        <translation>프로그램을 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="73"/>
        <source>Options</source>
        <translation>설정</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="81"/>
        <source>Resolution:</source>
        <translation>해상도:</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="88"/>
        <source>Automatic</source>
        <translation>자동</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="91"/>
        <source> DPI</source>
        <translation> DPI</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="104"/>
        <source>Program:</source>
        <translation>프로그램: </translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="116"/>
        <source>Use Preamble</source>
        <translation>머리말 사용</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="13"/>
        <source>Editor</source>
        <translation>편집기</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="133"/>
        <source>Information</source>
        <translation type="unfinished">정보</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="125"/>
        <source>An editor for this frame is already running!</source>
        <translation type="unfinished">이 프레임의 편집기가 실행 중!</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="129"/>
        <source>Editor running!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="135"/>
        <source>Please specify an editor in the preferences!</source>
        <translation type="unfinished">기본설정에서 편집기를 지정하시오!</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="322"/>
        <source>Error</source>
        <translation type="unfinished">오류</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="166"/>
        <source>Could not create a temporary file to run the external editor!</source>
        <translation type="unfinished">외부 편집기를 실행하기 위하여 임시파일을 생성할 수 없음!</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="221"/>
        <source>Run External Editor...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="206"/>
        <source>Running the editor failed with exitcode %d!</source>
        <translation type="unfinished">종료코드%d로 편집기 실행에 실패!</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="224"/>
        <source>Running the editor &quot;%1&quot; failed!</source>
        <translation type="unfinished">편집기 &quot;\%1&quot; 실행 실패!</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="318"/>
        <source>Status: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="324"/>
        <source>Finished</source>
        <translation type="unfinished">종료</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="327"/>
        <source>Running</source>
        <translation type="unfinished">실행 중</translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="505"/>
        <source>No item selected!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.cpp" line="507"/>
        <source>Insert symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/latexeditor.ui" line="155"/>
        <source>Run external editor...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LayerPalette</name>
    <message>
        <location filename="../../scribus/layers.cpp" line="290"/>
        <source>Delete Layer</source>
        <translation>레이어 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="291"/>
        <source>Do you want to delete all objects on this layer too?</source>
        <translation>이 레이어에서 전체 객체를 지우겠습니까?</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="560"/>
        <source>Layers</source>
        <translation>레이어</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="581"/>
        <source>Name</source>
        <translation>이름</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="587"/>
        <source>Add a new layer</source>
        <translation>새 레이어 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="589"/>
        <source>Delete layer</source>
        <translation>레이어 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="590"/>
        <source>Raise layer</source>
        <translation>레이어 위로</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="591"/>
        <source>Lower layer</source>
        <translation>레이어 아래로</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="579"/>
        <source>Opacity:</source>
        <translation>불투명도:</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="580"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="561"/>
        <source>Blend Mode:</source>
        <translation>혼합 모드:</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="563"/>
        <source>Normal</source>
        <translation>보통</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="564"/>
        <source>Darken</source>
        <translation>어둡게</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="565"/>
        <source>Lighten</source>
        <translation>밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="566"/>
        <source>Multiply</source>
        <translation>곱하기</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="567"/>
        <source>Screen</source>
        <translation>화면</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="568"/>
        <source>Overlay</source>
        <translation>중첩</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="569"/>
        <source>Hard Light</source>
        <translation>아주 밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="570"/>
        <source>Soft Light</source>
        <translation>중간 밝게</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="571"/>
        <source>Difference</source>
        <translation>차이</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="573"/>
        <source>Color Dodge</source>
        <translation>피하기</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="574"/>
        <source>Color Burn</source>
        <translation>태우기</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="572"/>
        <source>Exclusion</source>
        <translation>제외</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="575"/>
        <source>Hue</source>
        <translation>색조</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="576"/>
        <source>Saturation</source>
        <translation>채도</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="577"/>
        <source>Color</source>
        <translation>색상</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="578"/>
        <source>Luminosity</source>
        <translation>광도</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="588"/>
        <source>Duplicates the current layer</source>
        <translation>현재 레이어 복제</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="592"/>
        <source>Color of the Layer Indicator - Each layer has a color assigned to display on the canvas when layer indicators are enabled. You can double click to edit the color. </source>
        <translation>레이어 지시계의 색상 - 레이어 지시자가 캔버스상에 나타낼 수 있는 색상을 가지고 있습니다. 색상을 편집하기 위하여 더블 클릭을 하십시오.</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="593"/>
        <source>Make Layer Visible - Uncheck to hide the layer from the display </source>
        <translation>레이어를 볼 수 있도록 합니다. - 화면에서 레이어를 숨기기 위하여 체크하지 않습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="594"/>
        <source>Print Layer - Uncheck to disable printing. </source>
        <translation>인쇄 레이어 - 인쇄하지 않을 경우 체크하지 않습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="595"/>
        <source>Lock or Unlock Layer - Unchecked is unlocked </source>
        <translation>레이어 잠금 또는 해제 - 체크되지 않으면 잠금해제 상태임</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="596"/>
        <source>Text flows around objects in lower Layers - Enabling this forces text frames to flow around other objects, even in layers below</source>
        <translation>아래 레이어에서 객체 주변의 텍스트 흐름 - 비록 레이어들 아래에서 조차 이것은 텍스트 프레임이 다른 객체 주변에 흐름을 만들 수 있습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="597"/>
        <source>Outline Mode - Toggles the &apos;wireframe&apos; display of objects to speed the display of very complex objects.</source>
        <translation>윤곽선 모드 - 아주 복잡한 객체를 빨리 보기 위하여 객체의 줄 프레임 보기를 토글시킵니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/layers.cpp" line="598"/>
        <source>Name of the Layer - Double clicking on the name of a layer enabled editing</source>
        <translation>레이어 이름 - 편집 가능한 레어어의 이름을 더블 클릭합니다.</translation>
    </message>
</context>
<context>
    <name>LegacyMode</name>
    <message>
        <location filename="../../scribus/canvasmode_legacy.cpp" line="5024"/>
        <source>Open</source>
        <translation>열기</translation>
    </message>
    <message>
        <location filename="../../scribus/canvasmode_legacy.cpp" line="4994"/>
        <source>All Supported Formats</source>
        <translation>전체 지원 형식</translation>
    </message>
</context>
<context>
    <name>LensDialogBase</name>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="13"/>
        <source>Optical Lens</source>
        <translation>광학 렌즈</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Add Lens</source>
        <translation type="obsolete">렌즈 더하기</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Remove Lens</source>
        <translation type="obsolete">렌즈 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="98"/>
        <source>+</source>
        <translation>+</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="108"/>
        <source>-</source>
        <translation>-</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="126"/>
        <source>Lens Parameters</source>
        <translation>렌즈 매개변수</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>X Pos:</source>
        <translation type="obsolete">X위치:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Y Pos:</source>
        <translation type="obsolete">Y위치:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Radius:</source>
        <translation type="obsolete">반경:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Strength:</source>
        <translation type="obsolete">힘:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Magnification Lens</source>
        <translation type="obsolete">확대 렌즈</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Fish Eye Lens</source>
        <translation type="obsolete">어안 렌즈</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="55"/>
        <source>Add a new lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="58"/>
        <source>&amp;Add Lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="65"/>
        <source>Remove selected lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="68"/>
        <source>&amp;Remove Lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="95"/>
        <source>Zoom In</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="105"/>
        <source>Zoom Out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="138"/>
        <source>&amp;X Pos:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="148"/>
        <source>Horizontal position of the lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="161"/>
        <source>&amp;Y Pos:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="171"/>
        <source>Vertical position of the lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="184"/>
        <source>The selected lens acts like a magnification lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="187"/>
        <source>&amp;Magnification Lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="197"/>
        <source>The selected lens acts like a fish eye lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="200"/>
        <source>&amp;Fish Eye Lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="207"/>
        <source>Ra&amp;dius:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="217"/>
        <source>Radius of the lens</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="230"/>
        <source>&amp;Strength:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lensdialogbase.ui" line="240"/>
        <source>Strength of the lens</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LensEffectsPlugin</name>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="66"/>
        <source>Lens Effects...</source>
        <translation>렌즈 효과...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="70"/>
        <source>Path Tools</source>
        <translation>경로 도구</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="90"/>
        <source>Lens Effects</source>
        <translation>렌즈 효과</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/lenseffects/lenseffects.cpp" line="91"/>
        <source>Apply fancy lens effects</source>
        <translation>팬시 렌즈 효과 적용</translation>
    </message>
</context>
<context>
    <name>LineFormate</name>
    <message>
        <location filename="../lineformats.cpp" line="33"/>
        <source>Edit Line Styles</source>
        <translation type="obsolete">선 스타일 편집</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="49"/>
        <source>&amp;Import</source>
        <translation type="obsolete">들여오기</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="52"/>
        <source>&amp;New</source>
        <translation type="obsolete">새 파일(&amp;N)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="55"/>
        <source>&amp;Edit</source>
        <translation type="obsolete">편집(&amp;E)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="60"/>
        <source>D&amp;uplicate</source>
        <translation type="obsolete">복제(&amp;U)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="64"/>
        <source>&amp;Delete</source>
        <translation type="obsolete">삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="68"/>
        <source>&amp;Save</source>
        <translation type="obsolete">저장(&amp;S)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="125"/>
        <source>Copy of %1</source>
        <translation type="obsolete">%1 복사</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="154"/>
        <source>New Style</source>
        <translation type="obsolete">새 스타일</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Warning</source>
        <translation type="obsolete">경고</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Do you really want to delete this Style?</source>
        <translation type="obsolete">이 스타일을 삭제하겠습니까?</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;No</source>
        <translation type="obsolete">아니오(&amp;N)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Yes</source>
        <translation type="obsolete">예(&amp;Y)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="216"/>
        <source>Open</source>
        <translation type="obsolete">열기</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="216"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation type="obsolete">문서 (*.sla *.sla.gz *.scd *.scd.gz)전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Documents (*.sla *.scd);;All Files (*)</source>
        <translation type="obsolete">문서 (*.sla *.scd);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../lineformats.cpp" line="194"/>
        <source>Do you really want to delete this style?</source>
        <translation type="obsolete">이 스타일을 삭제하겠습니까?</translation>
    </message>
</context>
<context>
    <name>LineStyleW</name>
    <message>
        <location filename="../smlinestylew.ui" line="184"/>
        <source>%</source>
        <translation type="obsolete">%</translation>
    </message>
    <message>
        <location filename="../smlinestylew.ui" line="208"/>
        <source>Line Width:</source>
        <translation type="obsolete">선 너비:</translation>
    </message>
</context>
<context>
    <name>LineStyleWBase</name>
    <message>
        <location filename="" line="0"/>
        <source>%</source>
        <translation type="obsolete">%</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Line Width:</source>
        <translation type="obsolete">선 너비:</translation>
    </message>
</context>
<context>
    <name>LineStyleWidget</name>
    <message>
        <location filename="../smlinestyle.cpp" line="180"/>
        <source> pt</source>
        <translation type="obsolete"> 포인트</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="52"/>
        <source>Flat Cap</source>
        <translation type="obsolete">평면형</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="53"/>
        <source>Square Cap</source>
        <translation type="obsolete">사각형</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="54"/>
        <source>Round Cap</source>
        <translation type="obsolete">둥근형</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="56"/>
        <source>Miter Join</source>
        <translation type="obsolete">미터 결합</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="57"/>
        <source>Bevel Join</source>
        <translation type="obsolete">경사 결합</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="58"/>
        <source>Round Join</source>
        <translation type="obsolete">둥근 결합</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Solid Line</source>
        <translation type="obsolete">실선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dashed Line</source>
        <translation type="obsolete">대시선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dotted Line</source>
        <translation type="obsolete">점선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dash Dot Line</source>
        <translation type="obsolete">대시점선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dash Dot Dot Line</source>
        <translation type="obsolete">대시점점선</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="70"/>
        <source>Add a new line</source>
        <translation type="obsolete">새 선 더하기</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="71"/>
        <source>Remove a line</source>
        <translation type="obsolete">선 제거</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="72"/>
        <source>Line style</source>
        <translation type="obsolete">선 스타일</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="73"/>
        <source>Line width</source>
        <translation type="obsolete">선 너비</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="74"/>
        <source>End style</source>
        <translation type="obsolete">끝 스타일</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="75"/>
        <source>Join style</source>
        <translation type="obsolete">결합 스타일</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="76"/>
        <source>Line color</source>
        <translation type="obsolete">선 색상</translation>
    </message>
    <message>
        <location filename="../smlinestyle.cpp" line="77"/>
        <source>Line shade</source>
        <translation type="obsolete">선 음영</translation>
    </message>
</context>
<context>
    <name>LoadSavePlugin</name>
    <message>
        <location filename="../../scribus/loadsaveplugin.cpp" line="81"/>
        <source>All Files (*)</source>
        <translation>전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/loadsaveplugin.cpp" line="80"/>
        <source>No File Loader Plugins Found</source>
        <translation>파일 읽기 플러그인이 없음</translation>
    </message>
</context>
<context>
    <name>LoremManager</name>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="152"/>
        <source>Select Lorem Ipsum</source>
        <translation>Lorem Ipsum 선택</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="220"/>
        <source>Author:</source>
        <translation>저작자:</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="222"/>
        <source>Get More:</source>
        <translation>더 많이 얻기:</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="224"/>
        <source>XML File:</source>
        <translation>XML 파일:</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="264"/>
        <source>Lorem Ipsum</source>
        <translation>Lorem Ipsum</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="265"/>
        <source>Paragraphs:</source>
        <translation>문단:</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="268"/>
        <source>Alt+O</source>
        <translation>Alt+O</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="270"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="271"/>
        <source>Standard Lorem Ipsum</source>
        <translation>표준 Lorem Ipsum</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="266"/>
        <source>Random Paragraphs</source>
        <translation>무작위 문단</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="272"/>
        <source>Number of paragraphs of selected sample text to insert</source>
        <translation>삽입될 선택 샘플 텍스트의 문단 갯수</translation>
    </message>
    <message>
        <location filename="../../scribus/loremipsum.cpp" line="273"/>
        <source>List of languages available to insert sample text in</source>
        <translation>샘플 텍스트에 삽입 가능한 언어 목록</translation>
    </message>
</context>
<context>
    <name>MarginDialog</name>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="31"/>
        <source>Manage Page Properties</source>
        <translation>페이지 속성 관리</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="39"/>
        <source>Page Size</source>
        <translation>페이지 크기</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="44"/>
        <source>&amp;Size:</source>
        <translation>크기(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="60"/>
        <source>Orie&amp;ntation:</source>
        <translation>방향(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="63"/>
        <source>Portrait</source>
        <translation>세로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="64"/>
        <source>Landscape</source>
        <translation>가로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="71"/>
        <source>&amp;Width:</source>
        <translation>너비(&amp;W):</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="78"/>
        <source>&amp;Height:</source>
        <translation>높이(&amp;H):</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="83"/>
        <source>Move Objects with their Page</source>
        <translation>페이지와 함께 객체 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="89"/>
        <source>Type:</source>
        <translation>형태:</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="109"/>
        <source>Margin Guides</source>
        <translation>여백 안내선</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="116"/>
        <source>Other Settings</source>
        <translation>기타 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="121"/>
        <source>Master Page:</source>
        <translation>마스터 페이지:</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="175"/>
        <source>Size of the inserted pages, either a standard or custom size.</source>
        <translation>삽입된 페이지 크기: 표준 또는 사용자 크기.</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="176"/>
        <source>Orientation of the page(s) to be inserted</source>
        <translation>삽입 페이지 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="177"/>
        <source>Width of the page(s) to be inserted</source>
        <translation>삽입 페이지 너비</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="178"/>
        <source>Height of the page(s) to be inserted</source>
        <translation>삽입 페이지 높이</translation>
    </message>
    <message>
        <location filename="../../scribus/margindialog.cpp" line="179"/>
        <source>When inserting a new page between others, move objects with their current pages. This is the default action.</source>
        <translation>다른 페이지 사이에 새로운 페이지 삽입시, 현재 페이지와 객체를 이동. 이것은 기본 작동입니다.</translation>
    </message>
</context>
<context>
    <name>MarginWidget</name>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="33"/>
        <source>Preset Layouts:</source>
        <translation>배치 사전 조정:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="43"/>
        <source>&amp;Bottom:</source>
        <translation>아래(&amp;B):</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="45"/>
        <source>&amp;Top:</source>
        <translation>위(&amp;T):</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="212"/>
        <source>&amp;Right:</source>
        <translation>오른쪽(&amp;R):</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="211"/>
        <source>&amp;Left:</source>
        <translation>왼쪽(&amp;L):</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="90"/>
        <source>Apply the margin changes to all existing pages in the document</source>
        <translation>문서의 전체 기존 마스터 페이지에 여백 변경을 적용</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="156"/>
        <source>Distance between the top margin guide and the edge of the page</source>
        <translation>위 여백 안내선과 페이지 가장자리 사이의 거리</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="157"/>
        <source>Distance between the bottom margin guide and the edge of the page</source>
        <translation>아래 여백 안내선과 페이지 가장자리 사이의 거리</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="211"/>
        <source>&amp;Inside:</source>
        <translation>왼쪽(&amp;I):</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="212"/>
        <source>O&amp;utside:</source>
        <translation>오른쪽(&amp;U):</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="102"/>
        <source>Printer Margins...</source>
        <translation>프린터 여백...</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="104"/>
        <source>Import the margins for the selected page size from the available printers.</source>
        <translation>이용가능한 프린터에서 선택된 페이지 크기에 맞는 여백 들여오기.</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="79"/>
        <source>Apply settings to:</source>
        <translation>설정 적용:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="82"/>
        <source>All Document Pages</source>
        <translation>전체 문서 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="86"/>
        <source>All Master Pages</source>
        <translation>전체 마스터 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="91"/>
        <source>Apply the margin changes to all existing master pages in the document</source>
        <translation>문서에서 전체 기존 마스터 페이지에 여백 변경을 적용</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="108"/>
        <source>Margin Guides</source>
        <translation>여백 안내선</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="126"/>
        <source>Top:</source>
        <translation>위:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="131"/>
        <source>Bottom:</source>
        <translation>아래:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="143"/>
        <source>Distance for bleed from the top of the physical page</source>
        <translation>페이지 위부터 물림재단 거리</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="144"/>
        <source>Distance for bleed from the bottom of the physical page</source>
        <translation>페이지 아래부터 물림재단 거리</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="145"/>
        <source>Distance for bleed from the left of the physical page</source>
        <translation>페이지 왼쪽부터 물림재단 거리</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="146"/>
        <source>Distance for bleed from the right of the physical page</source>
        <translation>페이지 오른쪽쪽부터 물림재단 거리</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="152"/>
        <source>Bleeds</source>
        <translation>물림재단</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="217"/>
        <source>Inside:</source>
        <translation>왼쪽:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="218"/>
        <source>Outside:</source>
        <translation>오른쪽:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="222"/>
        <source>Left:</source>
        <translation>왼쪽:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="223"/>
        <source>Right:</source>
        <translation>오른쪽:</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="158"/>
        <source>Distance between the left margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding</source>
        <translation>왼쪽 여백 안내선과 페이지 모서리 사이의 거리. 두 쪽,세 쪽,네 쪽을 선택할 경우 이 여백 공간은 제본하기 위한 정확한 여백을 만들기 위하여 사용.</translation>
    </message>
    <message>
        <location filename="../../scribus/marginwidget.cpp" line="159"/>
        <source>Distance between the right margin guide and the edge of the page. If a double-sided, 3 or 4-fold layout is selected, this margin space can be used to achieve the correct margins for binding</source>
        <translation>오른쪽 여백 안내선과 페이지 모서리 사이의 거리. 두 쪽,세 쪽,네 쪽을 선택할 경우 이 여백 공간은 제본하기 위한 정확한 여백을 만들기 위하여 사용.</translation>
    </message>
</context>
<context>
    <name>MasterPagesPalette</name>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="39"/>
        <source>Edit Master Pages</source>
        <translation>마스터 페이지 편집</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="79"/>
        <source>Duplicate the selected master page</source>
        <translation>선택된 마스터 페이지를 복제합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="80"/>
        <source>Delete the selected master page</source>
        <translation>선택된 마스터 페이지를 삭제합니다</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="81"/>
        <source>Add a new master page</source>
        <translation>새 마스터 페이지를 더합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="82"/>
        <source>Import master pages from another document</source>
        <translation>다른 문서에서 마스터 페이지를 들여옵니다</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Warning</source>
        <translation type="obsolete">경고</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="110"/>
        <source>Do you really want to delete this master page?</source>
        <translation>이 마스터 페이지를 정말로 삭제하시겠습니까?</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;No</source>
        <translation type="obsolete">아니오(&amp;N)</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>&amp;Yes</source>
        <translation type="obsolete">예(&amp;Y)</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="137"/>
        <source>&amp;Name:</source>
        <translation>이름(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="137"/>
        <source>New Master Page</source>
        <translation>새 마스터 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="238"/>
        <source>Name:</source>
        <translation>이름:</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="238"/>
        <source>New MasterPage</source>
        <translation>새 마스터 페이지</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="291"/>
        <source>Copy #%1 of </source>
        <translation>#%1 복사</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Normal</source>
        <translation type="obsolete">보통</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="238"/>
        <source>New Master Page %1</source>
        <translation>새 마스터 페이지 %1</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="381"/>
        <source>Unable to Rename Master Page</source>
        <translation>마스터 페이지의 이름을 변경할 수 없음</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="381"/>
        <source>The Normal page is not allowed to be renamed.</source>
        <translation>보통 페이지 이름을 변경할 수 없습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="385"/>
        <source>Rename Master Page</source>
        <translation>마스터 페이지 다른 이름으로</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="385"/>
        <source>New Name:</source>
        <translation>새 이름:</translation>
    </message>
    <message>
        <location filename="../../scribus/masterpagepalette.cpp" line="135"/>
        <source>Copy #%1 of %2</source>
        <translation>#% 1을 %2에 복사</translation>
    </message>
</context>
<context>
    <name>Mdup</name>
    <message>
        <location filename="../mdup.cpp" line="29"/>
        <source>Multiple Duplicate</source>
        <translation type="obsolete">다수 복제</translation>
    </message>
    <message>
        <location filename="../mdup.cpp" line="48"/>
        <source>&amp;Number of Copies:</source>
        <translation type="obsolete">복사 갯수(&amp;N):</translation>
    </message>
    <message>
        <location filename="../mdup.cpp" line="50"/>
        <source>&amp;Horizontal Shift:</source>
        <translation type="obsolete">수평 이동(&amp;H):</translation>
    </message>
    <message>
        <location filename="../mdup.cpp" line="52"/>
        <source>&amp;Vertical Shift:</source>
        <translation type="obsolete">수직 이동(&amp;V):</translation>
    </message>
</context>
<context>
    <name>Measurements</name>
    <message>
        <location filename="" line="0"/>
        <source>Distances</source>
        <translation type="obsolete">거리</translation>
    </message>
    <message>
        <location filename="../measurements.cpp" line="49"/>
        <source>pt</source>
        <translation type="obsolete">포인트</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>X1:</source>
        <translation type="obsolete">X1:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Y1:</source>
        <translation type="obsolete">Y1:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>X2:</source>
        <translation type="obsolete">X2:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Y2:</source>
        <translation type="obsolete">Y2:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>DX:</source>
        <translation type="obsolete">거리X:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>DY:</source>
        <translation type="obsolete">거리Y:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Angle:</source>
        <translation type="obsolete">각도:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Length:</source>
        <translation type="obsolete">길이:</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source> &#xb0;</source>
        <translation type="obsolete"> 도</translation>
    </message>
    <message encoding="UTF-8">
        <location filename="../../scribus/measurements.cpp" line="69"/>
        <source> °</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MeasurementsBase</name>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="13"/>
        <source>Distances</source>
        <translation type="unfinished">거리</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="19"/>
        <source>X1:</source>
        <translation type="unfinished">X1:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="239"/>
        <source>10000.0000</source>
        <translation type="unfinished">10000.0000</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="52"/>
        <source>Y1:</source>
        <translation type="unfinished">Y1:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="82"/>
        <source>X2:</source>
        <translation type="unfinished">X2:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="112"/>
        <source>Y2:</source>
        <translation type="unfinished">Y2:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="142"/>
        <source>Length:</source>
        <translation type="unfinished">길이:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="172"/>
        <source>DX:</source>
        <translation type="unfinished">거리X:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="202"/>
        <source>DY:</source>
        <translation type="unfinished">거리Y:</translation>
    </message>
    <message>
        <location filename="../../scribus/measurementsbase.ui" line="232"/>
        <source>Angle:</source>
        <translation type="unfinished">각도:</translation>
    </message>
</context>
<context>
    <name>MergeDoc</name>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="37"/>
        <source>Import Master Page</source>
        <translation>마스터 페이지 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="37"/>
        <source>Import Page(s)</source>
        <translation>페이지 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="48"/>
        <source>&amp;From Document:</source>
        <translation>문서(&amp;F):</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="52"/>
        <source>Chan&amp;ge...</source>
        <translation>바꾸기(&amp;G)...</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="55"/>
        <source>&amp;Import Page(s):</source>
        <translation>페이지 들여오기(&amp;I):</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="59"/>
        <source>&amp;Import Master Page</source>
        <translation>마스터 페이지 들여오기(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="72"/>
        <source>Insert a comma separated list of tokens import where a token can be * for all the pages, 1-5 for a range of pages or a single page number.</source>
        <translation>전체 페이지는 *, 페이지의 일정 범위로 표시할 때는 1-5, 또는 단일 페이지 번호 1 로 표시하기 위하여 분리된 콤마를 삽입합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="75"/>
        <source> from 0</source>
        <translation>0 부터</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="78"/>
        <source>Create Page(s)</source>
        <translation>페이지 생성</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="82"/>
        <source>Before Page</source>
        <translation>페이지 전</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="83"/>
        <source>After Page</source>
        <translation>페이지 후</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="84"/>
        <source>At End</source>
        <translation>끝에</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="101"/>
        <source>&amp;Import</source>
        <translation>들여오기(&amp;I)</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="135"/>
        <source>Open</source>
        <translation>열기</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="135"/>
        <source>Documents (*.sla *.sla.gz *.scd *.scd.gz);;All Files (*)</source>
        <translation>문서 (*.sla *.sla.gz *.scd *.scd.gz)전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/mergedoc.cpp" line="190"/>
        <source> from %1</source>
        <translation>%1 부터</translation>
    </message>
</context>
<context>
    <name>MeshDistortionDialog</name>
    <message>
        <location filename="" line="0"/>
        <source>Dialog</source>
        <translation type="obsolete">대화창</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="44"/>
        <source>+</source>
        <translation>+</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="54"/>
        <source>-</source>
        <translation>-</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="13"/>
        <source>Mesh Distortion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="27"/>
        <source>Drag the red handles with the mouse to distort the mesh</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="41"/>
        <source>Zoom In</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="51"/>
        <source>Zoom Out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="82"/>
        <source>Resets the selected handles to their initial position.
If no handle is selected all handles will be reset.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortiondialog.ui" line="86"/>
        <source>&amp;Reset</source>
        <translation type="unfinished">초기화(&amp;R)</translation>
    </message>
</context>
<context>
    <name>MeshDistortionPlugin</name>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortion.cpp" line="69"/>
        <source>Mesh Distortion...</source>
        <translation>망사 왜곡...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortion.cpp" line="73"/>
        <source>Path Tools</source>
        <translation>경로 도구</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/tools/2geomtools/meshdistortion/meshdistortion.cpp" line="95"/>
        <source>Mesh Distortion of Polygons</source>
        <translation>다각형의 망사 왜곡</translation>
    </message>
</context>
<context>
    <name>MissingFont</name>
    <message>
        <location filename="../../scribus/missing.cpp" line="309"/>
        <source>Missing Font</source>
        <translation>없는 글꼴</translation>
    </message>
    <message>
        <location filename="../../scribus/missing.cpp" line="317"/>
        <source>The Font %1 is not installed.</source>
        <translation>글꼴 %1 이 설치되지 않았습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/missing.cpp" line="322"/>
        <source>Use</source>
        <translation>사용</translation>
    </message>
    <message>
        <location filename="../../scribus/missing.cpp" line="336"/>
        <source>instead</source>
        <translation>대체</translation>
    </message>
</context>
<context>
    <name>ModeToolBar</name>
    <message>
        <location filename="../../scribus/ui/modetoolbar.cpp" line="39"/>
        <source>Tools</source>
        <translation>도구</translation>
    </message>
    <message>
        <location filename="../../scribus/ui/modetoolbar.cpp" line="121"/>
        <source>Properties...</source>
        <translation>속성 지정...</translation>
    </message>
</context>
<context>
    <name>MovePages</name>
    <message>
        <location filename="../../scribus/movepage.cpp" line="28"/>
        <source>Move Pages</source>
        <translation>페이지 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="37"/>
        <source>Copy Page</source>
        <translation>페이지 복사</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="37"/>
        <source>Move Page(s)</source>
        <translation>페이지 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="48"/>
        <source>To:</source>
        <translation>To:</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="58"/>
        <source>Number of copies:</source>
        <translation>복사 갯수:</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="68"/>
        <source>Before Page</source>
        <translation>페이지 전</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="69"/>
        <source>After Page</source>
        <translation>페이지 후</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="70"/>
        <source>At End</source>
        <translation>끝에</translation>
    </message>
    <message>
        <location filename="../../scribus/movepage.cpp" line="78"/>
        <source>Move Page(s):</source>
        <translation>페이지 이동:</translation>
    </message>
</context>
<context>
    <name>MultiLine</name>
    <message>
        <location filename="../multiline.cpp" line="32"/>
        <source>Edit Style</source>
        <translation type="obsolete">스타일 편집</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="86"/>
        <source>Flat Cap</source>
        <translation type="obsolete">평면형</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="87"/>
        <source>Square Cap</source>
        <translation type="obsolete">사각형</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="88"/>
        <source>Round Cap</source>
        <translation type="obsolete">둥근형</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="92"/>
        <source>Miter Join</source>
        <translation type="obsolete">미터 결합</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="93"/>
        <source>Bevel Join</source>
        <translation type="obsolete">경사 결합</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="94"/>
        <source>Round Join</source>
        <translation type="obsolete">둥근 결합</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="100"/>
        <source>Line Width:</source>
        <translation type="obsolete">선 너비:</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="105"/>
        <source> pt</source>
        <translation type="obsolete"> 포인트</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="118"/>
        <source> %</source>
        <translation type="obsolete"> %</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source> pt </source>
        <translation type="obsolete"> 포이트 </translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Solid Line</source>
        <translation type="obsolete">실선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dashed Line</source>
        <translation type="obsolete">대시선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dotted Line</source>
        <translation type="obsolete">점선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dash Dot Line</source>
        <translation type="obsolete">대시점선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Dash Dot Dot Line</source>
        <translation type="obsolete">대시점점선</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Warning</source>
        <translation type="obsolete">경고</translation>
    </message>
    <message>
        <location filename="" line="0"/>
        <source>Name &quot;%1&quot; isn&apos;t unique.
Please choose another.</source>
        <translation type="obsolete">이름 &quot;%1&quot; 이 이미 있습니다.
<byte value="x9"/><byte value="x9"/>다른 이름을 선택하세요.</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="284"/>
        <source>OK</source>
        <translation type="obsolete">확인</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="284"/>
        <source>Name &quot;%1&quot; isn&apos;t unique.&lt;br/&gt;Please choose another.</source>
        <translation type="obsolete">이름 &quot;%1&quot; 이 이미 있습니다.
<byte value="x9"/><byte value="x9"/>&lt;br/&gt;다른 이름을 선택하세요.</translation>
    </message>
    <message>
        <location filename="../multiline.cpp" line="270"/>
        <source>pt</source>
        <translation type="obsolete">포인트</translation>
    </message>
</context>
<context>
    <name>MultiProgressDialog</name>
    <message>
        <location filename="../../scribus/multiprogressdialog.ui" line="13"/>
        <source>Progress</source>
        <translation>진행</translation>
    </message>
    <message>
        <location filename="../../scribus/multiprogressdialog.ui" line="24"/>
        <source>Overall Progress:</source>
        <translation>전체 진행:</translation>
    </message>
    <message>
        <location filename="../../scribus/multiprogressdialog.ui" line="67"/>
        <source>&amp;Cancel</source>
        <translation>취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/multiprogressdialog.cpp" line="74"/>
        <source>%v of %m</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MultipleDuplicate</name>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="112"/>
        <source>&amp;Horizontal Shift:</source>
        <translation>수평 이동(&amp;H):</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="165"/>
        <source>&amp;Vertical Shift:</source>
        <translation>수직 이동(&amp;V):</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.cpp" line="69"/>
        <source>&amp;Horizontal Gap:</source>
        <translation>수평 간격(&amp;H):</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.cpp" line="70"/>
        <source>&amp;Vertical Gap:</source>
        <translation>수직 간격(&amp;V):</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="13"/>
        <source>Multiple Duplicate</source>
        <translation>다수 복제 방법</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="32"/>
        <source>&amp;By Number of Copies</source>
        <translation>복사 갯수(&amp;B)</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="50"/>
        <source>&amp;Number of Copies:</source>
        <translation>복사할 갯수(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="91"/>
        <source>&amp;Shift Created Items By</source>
        <translation>생성 객체 이동(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="94"/>
        <source>Alt+S</source>
        <translation>Alt+S</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="81"/>
        <source>Create &amp;Gap Between Items Of</source>
        <translation>객체 사이 간격 생성(&amp;G)</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="84"/>
        <source>Alt+G</source>
        <translation>Alt+G</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="145"/>
        <source>Rotation:</source>
        <translation>회전:</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="217"/>
        <source>By &amp;Rows &amp;&amp; Columns</source>
        <translation>행/열(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="289"/>
        <source>Number of Rows:</source>
        <translation>삽입 행:</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="309"/>
        <source>Number of Columns:</source>
        <translation>삽입 열:</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="383"/>
        <source>&amp;OK</source>
        <translation>확인(&amp;O)</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="399"/>
        <source>&amp;Cancel</source>
        <translation>취소(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="245"/>
        <source>Vertical Gap:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../../scribus/multipleduplicate.ui" line="272"/>
        <source>Horizontal Gap:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MyPlugin</name>
    <message>
        <location filename="../../scribus/plugins/myplugin/myplugin.cpp" line="31"/>
        <source>My &amp;Plugin</source>
        <translation>자작 플러그인(&amp;P)</translation>
    </message>
</context>
<context>
    <name>MyPluginImpl</name>
    <message>
        <location filename="../../scribus/plugins/myplugin/mypluginimpl.cpp" line="23"/>
        <source>Scribus - My Plugin</source>
        <translation>Scribus - 자작 플러그인</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/myplugin/mypluginimpl.cpp" line="24"/>
        <source>The plugin worked!</source>
        <translation>플러그인 작업 완료!</translation>
    </message>
</context>
<context>
    <name>NewDoc</name>
    <message>
        <location filename="../../scribus/newfile.cpp" line="100"/>
        <source>New Document</source>
        <translation>새 문서</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="110"/>
        <source>&amp;New Document</source>
        <translation>새 문서(&amp;N)</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="112"/>
        <source>Open &amp;Existing Document</source>
        <translation>기존 문서 열기(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="115"/>
        <source>Open Recent &amp;Document</source>
        <translation>최근 문서 열기(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="126"/>
        <source>Do not show this dialog again</source>
        <translation>현재 창을 숨기기</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="140"/>
        <source>Document page size, either a standard size or a custom size</source>
        <translation>문서 페이지 크기 또는 사용자 크기</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="141"/>
        <source>Orientation of the document&apos;s pages</source>
        <translation>문서 페이지 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="142"/>
        <source>Width of the document&apos;s pages, editable if you have chosen a custom page size</source>
        <translation>문서 페이지 너비. 사용자 페이지 크기를 선택하면 편집이 가능</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="143"/>
        <source>Height of the document&apos;s pages, editable if you have chosen a custom page size</source>
        <translation>문서 페이지 높이. 사용자 페이지 크기를 선택하면 편집이 가능</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="144"/>
        <source>Initial number of pages of the document</source>
        <translation>문서의 초기 페이지수</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="145"/>
        <source>Default unit of measurement for document editing</source>
        <translation>문서를 편집할 때 기본 측정 단위</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="146"/>
        <source>Create text frames automatically when new pages are added</source>
        <translation>새 페이지를 더할 때 자동 텍스트 프레임 생성.</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="147"/>
        <source>Number of columns to create in automatically created text frames</source>
        <translation>자동 생성된 텍스트 프레임에서 생성될 열 수</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="148"/>
        <source>Distance between automatically created columns</source>
        <translation>자동 생성된 열 사이 공백</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="218"/>
        <source>&amp;Size:</source>
        <translation>크기(&amp;S):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="227"/>
        <source>Orie&amp;ntation:</source>
        <translation>방향(&amp;N):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="230"/>
        <source>Portrait</source>
        <translation>세로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="231"/>
        <source>Landscape</source>
        <translation>가로 방향</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="237"/>
        <source>&amp;Width:</source>
        <translation>너비(&amp;W):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="243"/>
        <source>&amp;Height:</source>
        <translation>높이(&amp;H):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="259"/>
        <source>Margin Guides</source>
        <translation>여백 안내선</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="278"/>
        <source>Options</source>
        <translation>설정</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="283"/>
        <source>N&amp;umber of Pages:</source>
        <translation>페이지 수(&amp;U):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="289"/>
        <source>&amp;Default Unit:</source>
        <translation>기본 단위(&amp;D):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="299"/>
        <source>&amp;Automatic Text Frames</source>
        <translation>자동 텍스트 프레임(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="309"/>
        <source>&amp;Gap:</source>
        <translation>간격(&amp;G):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="301"/>
        <source>Colu&amp;mns:</source>
        <translation>열(&amp;M):</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="354"/>
        <source>Open</source>
        <translation>열기</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="250"/>
        <source>First Page is:</source>
        <translation>처음 페이지 위치:</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="321"/>
        <source>Show Document Settings After Creation</source>
        <translation>생성 후 문서 설정 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/newfile.cpp" line="175"/>
        <source>Document Layout</source>
        <translation>제책</translation>
    </message>
</context>
<context>
    <name>NewFromTemplatePlugin</name>
    <message>
        <location filename="../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="59"/>
        <source>New &amp;from Template...</source>
        <translation>서식에서 새 파일(&amp;F)...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="79"/>
        <source>Load documents with predefined layout</source>
        <translation>사전 정의된 배열로 문서 불러오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/newfromtemplateplugin/nftemplate.cpp" line="81"/>
        <source>Start a document from a template made by other users or yourself (f.e. for documents you have a constant style).</source>
        <translation>사용자에 의해 만들어진 서식으로 부터 문서를 시작합니다.</translation>
    </message>
</context>
<context>
    <name>NodePalette</name>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="890"/>
        <source>Nodes</source>
        <translation>조절점</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="891"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="893"/>
        <source>&amp;Absolute Coordinates</source>
        <translation>절대 좌표(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="896"/>
        <source>&amp;X-Pos:</source>
        <translation>X 위치(&amp;X):</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="897"/>
        <source>&amp;Y-Pos:</source>
        <translation>Y 위치(&amp;Y):</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="898"/>
        <source>Edit &amp;Contour Line</source>
        <translation>기본 윤곽선 편집(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="899"/>
        <source>&amp;Reset Contour Line</source>
        <translation>기본 윤곽선 초기화(&amp;R)</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="901"/>
        <source>&amp;End Editing</source>
        <translation>편집 종료(&amp;E)</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="902"/>
        <source>Move Nodes</source>
        <translation>조절점 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="903"/>
        <source>Move Control Points</source>
        <translation>제어점 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="904"/>
        <source>Add Nodes</source>
        <translation>조절점 더하기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="905"/>
        <source>Delete Nodes</source>
        <translation>조절점 삭제</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="906"/>
        <source>Move Control Points Independently</source>
        <translation>제어점을 독립적으로 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="907"/>
        <source>Move Control Points Symmetrical</source>
        <translation>제어점을 대칭적으로 이동</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="908"/>
        <source>Reset Control Points</source>
        <translation>제어점 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="909"/>
        <source>Reset this Control Point</source>
        <translation>이 제어점 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="910"/>
        <source>Open a Polygon or Cuts a Bezier Curve</source>
        <translation>다각형을 열거나 베지어곡선을 잘라내기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="911"/>
        <source>Close this Bezier Curve</source>
        <translation>이 베지어 곡선 닫기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="912"/>
        <source>Mirror the Path Horizontally</source>
        <translation>조절점 경로 수평으로 대칭이동</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="913"/>
        <source>Mirror the Path Vertically</source>
        <translation>조절점 경로 수직으로 대칭이동</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="914"/>
        <source>Shear the Path Horizontally to the Right</source>
        <translation>조절점 경로를 오른쪽 수평으로 기울이기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="915"/>
        <source>Shear the Path Horizontally to the Left</source>
        <translation>조절점 경로를 왼쪽 수평으로 기울이기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="916"/>
        <source>Shear the Path Vertically Up</source>
        <translation>조절점 경로를 위쪽 수직으로 기울이기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="917"/>
        <source>Shear the Path Vertically Down</source>
        <translation>조절점 경로를 아래쪽 수직으로 기울이기</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="918"/>
        <source>Rotate the Path Counter-Clockwise</source>
        <translation>조절점 경로 반시계방향 회전</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="919"/>
        <source>Rotate the Path Clockwise</source>
        <translation>조절점 경로 시계방향 회전</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="921"/>
        <source>Enlarge the Size of the Path by shown %</source>
        <translation>% 로 조절점 경로 크기 늘임</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="924"/>
        <source>Angle of Rotation</source>
        <translation>회전 각도</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="927"/>
        <source>Activate Contour Line Editing Mode</source>
        <translation>기본 윤곽선 편집 모드 활성화</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="928"/>
        <source>Reset the Contour Line to the Original Shape of the Frame</source>
        <translation>기본 윤곽선을 프레임 초기 상태로 되돌림</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="930"/>
        <source>When checked use coordinates relative to the page, otherwise coordinates are relative to the Object.</source>
        <translation>체크되면 페이지와 연관된 좌표를 사용. 그렇지 않으면  좌표는 객체와 연관이 있음.</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="920"/>
        <source>Shrink the Size of the Path by shown %</source>
        <translation>% 에 의해 나타나는 경로 크기 줄임</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="922"/>
        <source>Reduce the Size of the Path by the shown value</source>
        <translation>제시된 값으로 조절점 경로 크기 줄임</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="923"/>
        <source>Enlarge the Size of the Path by the shown value</source>
        <translation>보여지는 값으로 경로 크기를 크게</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="925"/>
        <source>% to Enlarge or Shrink By</source>
        <translation>확대/축소 %단위</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="926"/>
        <source>Value to Enlarge or Shrink By</source>
        <translation>확대/축소 수치 </translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="900"/>
        <source>Set Contour to Image Clip</source>
        <translation>이미지 클립으로 외곽선 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="929"/>
        <source>Reset the Contour Line to the Clipping Path of the Image</source>
        <translation>이미지 클립 경로의 외곽선을 초기화</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="894"/>
        <source>to Canvas</source>
        <translation>캔버스로</translation>
    </message>
    <message>
        <location filename="../../scribus/nodeeditpalette.cpp" line="895"/>
        <source>to Page</source>
        <translation>페이지로</translation>
    </message>
</context>
<context>
    <name>OODPlug</name>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="296"/>
        <source>This document does not seem to be an OpenOffice Draw file.</source>
        <translation>이 문서는 OpenOffice Draw 파일은 아닌 것 같습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="687"/>
        <source>Group%1</source>
        <translation>그룹 %1</translation>
    </message>
</context>
<context>
    <name>OODrawImportPlugin</name>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="95"/>
        <source>Import &amp;OpenOffice.org Draw...</source>
        <translation>OpenOffice.org Draw 들여오기(&amp;O)...</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="110"/>
        <source>Imports OpenOffice.org Draw Files</source>
        <translation>OpenOffice.org Draw 파일 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="111"/>
        <source>Imports most OpenOffice.org Draw files into the current document, converting their vector data into Scribus objects.</source>
        <translation>OpenOffice.org Draw 파일을 현재 문서로 읽어오고, 벡터 자료를 Scribus 객체로 변환시킵니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="125"/>
        <source>OpenDocument 1.0 Draw</source>
        <comment>Import/export format name</comment>
        <translation>OpenDocument 1.0 Draw 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="137"/>
        <source>OpenOffice.org 1.x Draw</source>
        <comment>Import/export format name</comment>
        <translation>OpenOffice.org 1.x Draw 들여오기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="207"/>
        <source>This file contains some unsupported features</source>
        <translation>이 파일은 지원하지 않은 특성을 포함하고 있습니다</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oodraw/oodrawimp.cpp" line="205"/>
        <source>The file could not be imported</source>
        <translation>파일을 들여올 수 없습니다</translation>
    </message>
</context>
<context>
    <name>OdtDialog</name>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="43"/>
        <source>OpenDocument Importer Options</source>
        <translation>OpenDocument 들여오기 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="52"/>
        <source>Overwrite Paragraph Styles</source>
        <translation>문단 스타일 겹쳐쓰기</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="54"/>
        <source>Enabling this will overwrite existing styles in the current Scribus document</source>
        <translation>현재 Scribus문서에서 기존 스타일을 겹쳐쓰는 것이 가능합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="61"/>
        <source>Merge Paragraph Styles</source>
        <translation>문단 스타일 병합</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="63"/>
        <source>Merge paragraph styles by attributes. This will result in fewer similar paragraph styles, will retain style attributes, even if the original document&apos;s styles are named differently.</source>
        <translation>속성에 의하여 문단 스타일을 합칩니다. 원래 문서 스타일이 다르게 명명되었더라도 이것은 약간 문단 스타일에 영향을 미치고 스타일 속성이 유지됩니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="70"/>
        <source>Use document name as a prefix for paragraph styles</source>
        <translation>문단 스타일에 접두어로 문서이름을 사용합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="72"/>
        <source>Prepend the document name to the paragraph style name in Scribus.</source>
        <translation>Scribus에서 문서 이름을 문단 스타일 이름으로 추가합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="79"/>
        <source>Do not ask again</source>
        <translation>다시 묻지 않음</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="81"/>
        <source>Make these settings the default and do not prompt again when importing an OASIS OpenDocument.</source>
        <translation>이들 설정을 기본값으로 만들고, OASIS OpenDocument를 들여올 때 다시 묻지 않습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="90"/>
        <source>OK</source>
        <translation>확인</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/gettext/odtim/odtdia.cpp" line="92"/>
        <source>Cancel</source>
        <translation>취소</translation>
    </message>
</context>
<context>
    <name>OldScribusFormat</name>
    <message>
        <location filename="../../scribus/plugins/fileloader/oldscribusformat/oldscribusformat.cpp" line="59"/>
        <source>Scribus Document</source>
        <translation>Scribus 문서</translation>
    </message>
    <message>
        <location filename="../../scribus/plugins/fileloader/oldscribusformat/oldscribusformat.cpp" line="70"/>
        <source>Scribus 1.2.x Document</source>
        <translation>Scribus 1.2.x 문서</translation>
    </message>
</context>
<context>
    <name>OneClick</name>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="37"/>
        <source>Origin</source>
        <translation>시점</translation>
    </message>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="54"/>
        <source>Size</source>
        <translation>크기</translation>
    </message>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="59"/>
        <source>Width:</source>
        <translation>너비:</translation>
    </message>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="61"/>
        <source>Length:</source>
        <translation>길이:</translation>
    </message>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="69"/>
        <source>Height:</source>
        <translation>높이:</translation>
    </message>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="71"/>
        <source>Angle:</source>
        <translation>각도:</translation>
    </message>
    <message>
        <location filename="../../scribus/oneclick.cpp" line="101"/>
        <source>Remember Values</source>
        <translation>값 기억</translation>
    </message>
</context>
<context>
    <name>OutlinePalette</name>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="908"/>
        <source>Element</source>
        <translation>요소</translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="287"/>
        <source>Name &quot;%1&quot; isn&apos;t unique.&lt;br/&gt;Please choose another.</source>
        <translation>이름 &quot;%1&quot; 이 이미 있습니다.&lt;br/&gt;다른 이름을 선택하시오</translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="876"/>
        <source>Group </source>
        <translation>그룹 </translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="751"/>
        <source>Page </source>
        <translation>페이지 </translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="806"/>
        <source>Free Objects</source>
        <translation>자유 객체</translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="907"/>
        <source>Outline</source>
        <translation>문서 전체 윤곽</translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="140"/>
        <source>Enter a keyword or regular expression to filter the outline.</source>
        <translation>윤곽선을 필터하기 위한 키워드 또는 정규 표현식을 입력.</translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="141"/>
        <source>Ctrl+f</source>
        <comment>Filter the Outline using a keyword</comment>
        <translation>Ctrl+f</translation>
    </message>
    <message>
        <location filename="../../scribus/outlinepalette.cpp" line="909"/>
        <source>Filter:</source>
        <translation>필터:</translation>
    </message>
</context>
<context>
    <name>OutlineValues</name>
    <message>
        <location filename="../../scribus/styleselect.cpp" line="97"/>
        <source> %</source>
        <translation> %</translation>
    </message>
    <message>
        <location filename="../../scribus/styleselect.cpp" line="98"/>
        <source>Linewidth</source>
        <translation>선 너비</translation>
    </message>
</context>
<context>
    <name>PDFExportDialog</name>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="152"/>
        <source>Save as PDF</source>
        <translation>PDF 저장</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="65"/>
        <source>O&amp;utput to File:</source>
        <translation>출력을 파일로(&amp;U):</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="94"/>
        <source>Cha&amp;nge...</source>
        <translation>바꾸기(&amp;N)...</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="97"/>
        <source>Output one file for eac&amp;h page</source>
        <translation>여러 페이지를 한 파일로 출력(&amp;H)</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="110"/>
        <source>&amp;Save</source>
        <translation>저장(&amp;S)</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="122"/>
        <source>This enables exporting one individually named PDF file for each page in the document. Page numbers are added automatically. This is most useful for imposing PDF for commercial printing.</source>
        <translation>문서에서  각각 명명된 PDF파일을 개별적으로 내보낼 수 있습니다. 페이지번호를 자동으로 더합니다. 이것은 상업적 출판에서 PDF 생성에 가장 유용합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="204"/>
        <source>Save as</source>
        <translation>다른 이름으로</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="204"/>
        <source>PDF Files (*.pdf);;All Files (*)</source>
        <translation>PDF 파일 (*.pdf);;전체 파일 (*)</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="123"/>
        <source>The save button will be disabled if you are trying to export PDF/X-3 and the info string is missing from the PDF/X-3 tab.</source>
        <translation>PDF/X-3내보내기를 시도하거나 the PDF/X-3 탭에서 정보 문자가 빠졌을 경우에는 저장 버튼은 사용할 수 없습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="153"/>
        <source>%1 does not exists and will be created, continue?</source>
        <translation>%1이 없지만 생성시킬 수 있습니다. 계속 하시겠습니까?</translation>
    </message>
    <message>
        <location filename="../../scribus/pdfopts.cpp" line="170"/>
        <source>Cannot create directory: 
%1</source>
        <translation>폴더를 생성할 수 없음: 
%1</translation>
    </message>
</context>
<context>
    <name>PDFLibCore</name>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="135"/>
        <source>Saving PDF</source>
        <translation>PDF 저장 중</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="139"/>
        <source>Exporting Master Page:</source>
        <translation>마스터 페이지 내보내기 중:</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="139"/>
        <source>Exporting Page:</source>
        <translation>페이지 내보내기 중:</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="139"/>
        <source>Exporting Items on Current Page:</source>
        <translation>현재 페이지 객체 내보내기 중:</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="2516"/>
        <source>Page:</source>
        <translation>페이지:</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="2529"/>
        <source>Date:</source>
        <translation>날짜:</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="7530"/>
        <source>Failed to load an image : %1</source>
        <translation>이미지 읽어오기 실패 : %1</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="7535"/>
        <source>Failed to write an image : %1</source>
        <translation>이미지 쓰기 실패 : %1</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="7540"/>
        <source>Failed to load an image mask : %1</source>
        <translation>이미지 마스크 읽어오기 실패 : %1</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="7545"/>
        <source>Insufficient memory for processing an image</source>
        <translation>이미지 처리를 위한 불충분한 메모리</translation>
    </message>
    <message>
        <location filename="../../scribus/pdflib_core.cpp" line="7525"/>
        <source>A write error occured, please check available disk space</source>
        <translation>쓰기 오류 발생, 사용가능한 디스크 공간을 확인하시오</translation>
    </message>
</context>
<context>
    <name>PDFToolBar</name>
    <message>
        <location filename="../../scribus/ui/pdftoolbar.cpp" line="29"/>
        <source>PDF Tools</source>
        <translation>PDF 도구</translation>
    </message>
</context>
<context>
    <name>PPreview</name>
    <message>
        <location filename="../../scribus/preview.cpp" line="81"/>
        <source>Print Preview</source>
        <translation>인쇄 미리보기</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="133"/>
        <source>Display Trans&amp;parency</source>
        <translation>투명도 보이기(&amp;P)</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="248"/>
        <source>&amp;Under Color Removal</source>
        <translation>색상 제거 상태(&amp;U)</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="138"/>
        <source>&amp;Display CMYK</source>
        <translation>CMYK 보이기(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="206"/>
        <source>&amp;C</source>
        <translation>&amp;C</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="211"/>
        <source>&amp;M</source>
        <translation>&amp;M</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="216"/>
        <source>&amp;Y</source>
        <translation>&amp;Y</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="221"/>
        <source>&amp;K</source>
        <translation>&amp;K</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="150"/>
        <source>Separation Name</source>
        <translation>분해 이름</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="162"/>
        <source>Cyan</source>
        <translation>남색</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="169"/>
        <source>Magenta</source>
        <translation>자홍색</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="176"/>
        <source>Yellow</source>
        <translation>노란색</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="183"/>
        <source>Black</source>
        <translation>검은색</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="269"/>
        <source>Scaling:</source>
        <translation>비율:</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="294"/>
        <source>Close</source>
        <translation>닫기</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="297"/>
        <source>Print...</source>
        <translation>인쇄...</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="326"/>
        <source>Shows transparency and transparent items in your document. Requires Ghostscript 7.07 or later</source>
        <translation>문서의 투명도와 투명 객체를 보입니다. 고스트 7.07버전이상을 요구합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="327"/>
        <source>Gives a print preview using simulations of generic CMYK inks, instead of RGB colors</source>
        <translation>RGB색상 대신 CMYK의 가상실험을 이용하여 인쇄 미리보기를 합니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="328"/>
        <source>A way of switching off some of the gray shades which are composed of cyan, yellow and magenta and using black instead. UCR most affects parts of images which are neutral and/or dark tones which are close to the gray. Use of this may improve printing some images and some experimentation and testing is need on a case by case basis. UCR reduces the possibility of over saturation with CMY inks.</source>
        <translation>검정, 청록, 노랑, 자홍으로 구성된 그레이 음영으로 바꾸는 방법. UCR은 회색에 가까운 중간 또는 어두운 색조의 이미지부분에 영향을 준다.  이것은 이미지출력과 실험방법 및 개별적으로 필요한 테스팅등을 향상시킨다. UCR은 CMY 잉크의 과도한 채색의 가능성을 감소시켜 줍니다</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="329"/>
        <source>Resize the scale of the page.</source>
        <translation>페이지 비율 변경</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="350"/>
        <source>Enable/disable the C (Cyan) ink plate</source>
        <translation>C(남색)잉크 팔레트 가능/불가</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="351"/>
        <source>Enable/disable the M (Magenta) ink plate</source>
        <translation>M(자홍색)잉크 팔레트 가능/불가</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="352"/>
        <source>Enable/disable the Y (Yellow) ink plate</source>
        <translation>Y(노란색)잉크 팔레트 가능/불가</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="353"/>
        <source>Enable/disable the K (Black) ink plate</source>
        <translation>K(검은색)잉크 팔레트 가능/불가</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="619"/>
        <source>All</source>
        <translation>전체</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="1106"/>
        <source>File</source>
        <translation>파일</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="128"/>
        <source>Enable &amp;Antialiasing</source>
        <translation>부드러운 처리 가능(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="281"/>
        <source>Fit to Width</source>
        <translation>너비에 맞춤</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="282"/>
        <source>Fit to Height</source>
        <translation>높이에 맞춤</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="283"/>
        <source>Fit to Page</source>
        <translation>페이지에 맞춤</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="325"/>
        <source>Provides a more pleasant view of Type 1 fonts, TrueType Fonts, OpenType Fonts, EPS, PDF and vector graphics in the preview, at the expense of a slight slowdown in previewing</source>
        <translation>미리보기할 때 약간 지체현상이 나타나지만  Type 1 글꼴, 트루타입 글꼴, 오픈타입 글꼴, EPS, PDF 그리고 벡터그래픽에서 보기 좋습니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="122"/>
        <source>Display Settings</source>
        <translation>설정 보이기</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="230"/>
        <source>Print Settings</source>
        <translation>인쇄 설정</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="236"/>
        <source>Mirror Page(s) Horizontal</source>
        <translation>페이지 수평 미러</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="239"/>
        <source>Mirror Page(s) Vertical</source>
        <translation>페이지 수직 미러</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="242"/>
        <source>Clip to Page Margins</source>
        <translation>페이지 여백으로 자르기</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="245"/>
        <source>Print in Grayscale</source>
        <translation>회색톤 인쇄</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="251"/>
        <source>Convert Spot Colors</source>
        <translation>Spot 색상 변환</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="330"/>
        <source>Enables Spot Colors to be converted to composite colors. Unless you are planning to print spot colors at a commercial printer, this is probably best left enabled.</source>
        <translation>Spot 색상을 혼합 색상으로 변환 가능, Spot 색상 출력을 하지 않는다면 가능한 한 그대로 둡니다.</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="254"/>
        <source>Apply Color Profiles</source>
        <translation>색상 프로파일 적용</translation>
    </message>
    <message>
        <location filename="../../scribus/preview.cpp" line="331"/>
        <source>Allows you to embed color profiles in the print stream when color management is enabled</source>
        <translation>컬러 관리가 가능한 경우 인쇄 스트림에 내장 색상 ICC 프로파일을 허용합니다.</translation>
    </message>
</context>
<context>
    <name>PSLib</name>
    <message>
        <location filename="../../scribus/pslib.cpp" line="1788"/>
        <source>Processing Master Page:</source>
        <translation>마스터 페이지 처리 중:</translation>
    </message>
    <message>
        <location filename="../../scribus/pslib.cpp" line="1788"/>
        <source>Exporting Page:</source>
        <translation>페이지 내보내는 중:</translation>
    </message>
    <message>
        <location filename="../../scribus/pslib.cpp" line="1721"/>
        <source>Failed to write data for an image</source>
        <translation>이미지 자료 쓰기 실패</translation>
    </message>
    <message>
        <location filename="../../scribus/pslib.cpp" line="1726"/>
        <source>Failed to load an image : %1</source>
        <translation>이미지 읽어오기 실패 : %1</translation>
    </message>
    <message>
        <location filename="../../scribus/pslib.cpp" line="1731"/>
        <source>Failed to load an image mask : %1</source>
        <translation>이미지 마스크 읽어오기 실패 : %1</translation>
    </message>
    <message>
        <location filename="../../scribus/pslib.cpp" line="1736"/>
        <source>Insufficient memory for processing an image</source>
        <translation>이미지 작업에 불충분한 메모리</translation>
    </message>
</context>
<context>
    <name>PageItem</name>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="368"/>
        <source>Image</source>
        <translation>이미지</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="372"/>
        <source>Text</source>
        <translation>텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="376"/>
        <source>Line</source>
        <translation>선</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="380"/>
        <source>Polygon</source>
        <translation>다각형</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="384"/>
        <source>Polyline</source>
        <translation>다각형 선</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="388"/>
        <source>PathText</source>
        <translation>경로텍스트</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitem.cpp" line="3563"/>
        <source>Copy of</source>
        <translation>복사</translation>
    </message>
</context>
<context>
    <name>PageItemAttributes</name>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="58"/>
        <source>&amp;Add</source>
        <translation>더하기(&amp;A)</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="61"/>
        <source>Alt+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="68"/>
        <source>&amp;Copy</source>
        <translation>복사(&amp;C)</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="71"/>
        <source>Alt+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="78"/>
        <source>&amp;Delete</source>
        <translation>삭제(&amp;D)</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="81"/>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="88"/>
        <source>C&amp;lear</source>
        <translation>제거(&amp;L)</translation>
    </message>
    <message>
        <location filename="../../scribus/pageitemattributes.ui" line="91"/>
        <source>Alt+L</source>
        <translation>Alt+L</translation>
    </message>